NaviFly F83 6.25-inch Motorcycle Carplay GPS Navigation Android Auto Dual Camera User Manual

1. Pwodwi souview

The NaviFly F83 is a 6.25-inch motorcycle Carplay dash cam featuring two waterproof cameras for front and rear video recording. It supports wireless Carplay and Android Auto connections, allowing riders to connect their phones for GPS navigation, music playback, Bluetooth calls, and voice assistance. The device boasts an IP67 waterproof rating, ensuring durability and normal operation even in rainy conditions.

2. Lis konpozan pwodwi yo

Pake a gen ladan eleman sa yo:

3. Spécifications pwodwi

4. Memory Card Specifications Requirement

The quality of the memory card significantly impacts the stability of video recording. For optimal performance and safe video recording, please use memory cards from reputable brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification should be at least Class 10, and the card must support up to 256GB capacity.

5. Memory Card Installation Instructions

Pou enstale kat memwa a:

1. First, remove the TF card cover.
2. Insert the memory card into the device, ensuring the correct orientation.
3. Remete kouvèti kat TF la.
4. Finally, secure the cover by tightening the two screws.

Note: Pay attention to the direction of the card cover during reinstallation.

6. Mounting Bracket Installation Instructions

6.1. Details of Bracket Accessories

6.2. Bracket Installation Steps

1. Install the TPU pads in size order on the corresponding slots of the bracket bottom cover and bracket connecting rod.
2. Install the bracket bottom cover on the handlebar.
3. Install the bracket connecting rod and bracket bottom cover together.
4. Use screw 2 to secure them.
5. Secure the bracket assembly and the main unit with screw 2.

7. Cable Clicker Installation Instructions

To install the cable clicker control:

1. Install the cable clicker control on the left handlebar of the motorcycle.
2. Tache li ak vis.

8. Enstriksyon Koneksyon

8.1. Power Cable Connection Instructions

Connect the power cable to the motorcycle battery as follows:

• Red wire: Connect to ACC (Accessory power).
• Yellow wire: Connect to B+ (Battery positive).
• Black wire: Connect to ground.

Nòt: Make sure to confirm the corresponding ACC/B+/ground interfaces on the motorcycle, connect them one-to-one, and tighten. Please use the original power cable.

8.2. BM Connector Wiring Instructions

Connect the components using the BM connectors:

1. Connect the front and rear cameras to the corresponding BM connector on the main unit and tighten them. (Wires are marked with Front/Rear CH1/2).
2. Connect the cable clicker control to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Controller).
3. Connect the power cable to the corresponding BM connector on the main unit and tighten it. (Wire is marked with Power).

9. Front and Rear Camera Installation Instructions

Install the front and rear cameras separately at the front and rear of the motorcycle, and secure them in place.

10. Overall Installation Schematic

This diagram illustrates the complete installation of the NaviFly F83 system on a motorcycle.

11. Eksplikasyon entèfas

The main interface of the device features several buttons and indicators:

1. Bouton Kay: Klike pou retounen nan paj kay la.
2. Kle klète: Klike pou ajiste klète ekran an.
3. Rakoursi Kle Sòti Odyo: Yon sèl klike pou antre nan ekran demonstrasyon an pou konekte kas ekoutè Bluetooth yo ak telefòn nan.
4. Bouton rakoursi kamera: Klike sou view koòdone anrejistreman an.
5. Bouton Chanje: Klike pou chanje ant ekran kamera devan an, ekran kamera dèyè a, ak pre-kamera motosiklèt la.view.
6. Bouton dosye: Klike pou kòmanse anrejistre videyo a, klike ankò pou sispann anrejistreman an.
7. bouton foto: Klike pou pran yon foto ak yon sèl klike sou.
8. Bouton fèmen: Bloke videyo k ap anrejistre kounye a pou anpeche li pèdi.
9. Apple Carplay: Li konekte ak aparèy Apple yo.
10. Android Auto: Konekte ak aparèy Android yo.
11. Videyo WiFi: Klike pou antre nan mòd koneksyon, gade epi anrejistre videyo sou telefòn ou.
12. Sòti odyo: After Carplay/Auto phone projection, the phone's Bluetooth can connect to Bluetooth headphones for music playback or answering calls.
13. Lèktur videyo: Klike sou view videyo sou ekran videyo a.
14. Anviwònman: Klike pou jwenn aksè nan meni paramèt yo.

12. Ajisteman Otomatik Klète

The built-in light sensor automatically detects ambient light and adjusts screen brightness for comfort. In automatic brightness mode, manual adjustment is disabled.

• Click the "AUTO" button on the sidebar to enable/disable automatic brightness.
• Lightly press the "AUTO" button to switch to automatic brightness mode.
• You can set minimum and maximum brightness values. Drag the white dot button on the left to set the minimum, and the right button for the maximum. Settings are saved automatically.

13. Rain Mode (Screen Lock)

To prevent accidental touches from raindrops on rainy days, you can activate Rain Mode:

• Aktive: Long-press the third button on the cable clicker control for 5 seconds. Once activated, touchscreen functionality will be disabled.
• Debloke: Long-press the third button on the cable clicker control for 5 seconds again.

14. Koneksyon Karakteristik

14.1. Apple CarPlay

Pou konekte iPhone ou a atravè Apple CarPlay:

1. Click the [Apple CarPlay] button on the device interface.
2. Sou iPhone ou a, aktive Wi-Fi ak Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the CarPlay connection prompt on your iPhone.

Note: The Apple CarPlay option only supports Apple phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.2. Android Auto

Pou konekte telefòn Android ou a atravè Android Auto:

1. Click the [Android Auto] button on the device interface.
2. Sou telefòn Android ou a, aktive Wi-Fi ak Bluetooth.
3. Select the device's Bluetooth (named MT02-XXX) from your phone's Bluetooth settings and pair.
4. Confirm the Android Auto connection prompt on your Android phone.

Note: The wireless Android Auto option only supports Android phones. When the machine is powered on, it will attempt to automatically connect to the last connected phone.

14.3. WiFi Video

Pou konekte pou fonksyonalite videyo WiFi:

1. Scan the QR code on the device screen to download the corresponding application (Viidure).
2. Open the application and follow the prompts to connect to the device's WiFi. (WiFi Name: RTSP-XXXXX, Password: 12345678).
3. Once connected, the device will enter the recording screen, and you can view or download recorded videos, and adjust machine parameters via your phone.

Note: Closing the WiFi on your phone will disconnect the connection. It takes approximately one minute after disconnecting to operate on the machine.

15. Dash Cam Operation

When the device is in recording mode, camera images will not be displayed on the main page. To view the camera images, click the camera icon. When a card is inserted, the system automatically enters recording mode. During recording, the red dot in the recording icon will blink.

16. Audio Sòti

After connecting to Apple CarPlay or Android Auto for screen mirroring, you can use your phone's Bluetooth to connect to the motorcycle's Bluetooth headphones. Once connected successfully, all sounds produced by the device will be transmitted to the motorcycle's Bluetooth headphones for playback.

Enpòtan: If there are any sound abnormalities, please disconnect the phone from the headphones and reconnect.

17. Lektur videyo

To enter the video playback interface, click the [Video Playback] button on the main screen.

In the playback interface:

• You can select [Video], [Photo], or [Locked Video] folders.
• Klike sou bouton seleksyon an akote yon file pou efase li, bloke li, oswa debloke li.
• Click the play/pause button to play or pause the video.
• Click the next/previous buttons to switch to the next video or photo.
• Klike sou bouton plen ekran an pou jwe videyo a an plen ekran.
• Click the back button to return to the previous screen.

18. Anviwònman

The settings options are divided into three main parts: General, Camera, and System.

18.1. Jeneral Anviwònman

• Klate: Adjust screen brightness (see section 12).
• Touche asistans: This is a floating window button in screen projection mode on your phone.
• Koneksyon klè: Clear the connection history with your phone (Bluetooth, WiFi, screen playback).
• Mòd manyen: Choose between normal mode or rain mode. In rain mode, touch disable function can be enabled by long pressing the square control button.

18.2. Anviwònman Kamera

• Rezolisyon dosye: Set video resolution to 1080P or 720P (default is 1080P).
• Split Time (Segmented Time): Set video segmentation time to 1, 3, or 5 minutes (system default is 1 minute).
• Microphone (Recording Sound): Aktive oswa dezaktive anrejistreman mikwofòn nan.
• Imaj nan miwa dèyè a: Turn rear camera mirror image on or off for flexible camera installation.

18.3. Anviwònman Sistèm

• Lang: Select operating language (Simplified Chinese, Traditional Chinese, English, Russian, Spanish, French, German, Japanese, Korean, Italian, Portuguese).
• Dat ak Lè: Set year, month, day, hour, minute, second, and time format.
• Enfòmasyon sou Depo: View memory card information, including remaining available capacity.
• Fòma: Format all data on the inserted memory card. It is recommended to manually format the card upon first insertion and regularly thereafter.
• Reset faktori: Restore all settings to their initial state.
• Vèsyon mikrolojisyèl: View vèsyon firmwèr aktyèl la.

19. Troubleshooting (Common Issues)

20. Konsèy itilizatè yo

• For optimal performance, ensure your phone's operating system and the device's firmware are up to date.
• Regularly check and clean camera lenses for clear recordings.
• Periodically format your memory card to maintain recording stability and free up space.
• When connecting to Carplay/Android Auto, ensure your phone's Bluetooth and Wi-Fi are enabled and correctly paired.

21. Garanti & Sipò

The NaviFly F83 comes with a 365-day free replacement warranty. For any quality problems, please contact the seller to confirm the issue. After confirming, return the item to the seller, and upon receipt, a new item will be sent to you.

Pou plis asistans oubyen pou view the official user manual in PDF format, please refer to the following document: NaviFly F83 User Manual (PDF).