1. Entwodiksyon
The T3231 Digital Time Delay Relay is a versatile control module designed for precise timing applications. Featuring a dual LED display and intuitive touch buttons, it allows for easy setting of delay times and various operating modes. This relay supports a wide time range from 1 second to 999 hours and offers multiple working modes including timed, cyclic, and periodic operations. It is suitable for a broad range of applications, from industrial control to home automation, such as controlling pet feeders or water dispensers.
2. Karakteristik
- Gwo ranje tan: Adjustable from 1 second to 999 hours.
- Doub ekspozisyon dirije: Red and blue LED modules for clear display of ON/OFF times.
- Kontwòl entwisyon: Touch buttons for easy setting of delay time and operating modes.
- Mòd travay miltip: Supports timed, cyclic, and periodic operations.
- Sòti dirèk: Antre voltage egal pwodiksyon voltage.
- Power-off Saving: Kenbe paramèt yo apre yon pann kouran.
- Automatic Trigger: Supports automatic triggering.
- Konsepsyon kontra enfòmèl ant: Embedded installation with a size of 77*39.3mm.
3. Espesifikasyon
| Atribi | Spesifikasyon |
|---|---|
| Non pwodwi | T3231 Kontwolè |
| Non mak | Aideepen |
| Nimewo Modèl | Relè reta |
| Travay Voltage Opsyon | DC12V, DC24V, AC110-220V |
| Maximum Power (DC12V) | 240W |
| Maximum Power (DC24V) | 480W |
| Maximum Power (AC110-220V) | 1500W |
| Maksimòm Kouran | 20A |
| Kalite Sòti | Active Output (Output Voltage = Working Voltage) |
| Kalite relè | 1-channel Normally Open Relay |
| Timing Unit | Seconds / Minutes / Hours |
| Distribisyon Range | 1 to 999 (Minimum measurement unit: 1 second) |
| Single Delay ON/OFF | Sipòte |
| Infinite Loop ON/OFF | Sipòte |
| Switching Priority Adjustment | Sipòte |
| Deklanche otomatik | Sipòte |
| Power Off Saving | Supported (saves settings) |
| Reset and Restart | Sipòte |
| Inite senkronizasyon | Synchronization, only 3 combinations of timing units available |
| Deklanche Manyèl | Pa sipòte |
| Deklanche ekstèn | Pa sipòte |
| Mete Lock | Pa sipòte |
| Gwosè pwodwi | 79.5mm x 42.1mm x 27.8mm (3.12in x 1.65in x 1.09in) |
| Ouvèti enstalasyon | 77mm x 39.3mm |
| Teyori | Tan relè |
| Sous pouvwa | AC |
| Kontakte chaj | Segondè pouvwa |
| Sèvi ak | Objektif jeneral |
| Pwoteje Karakteristik | Sele |
| Sètifikasyon | CE |
4. Enstalasyon
Before connecting the T3231 relay, ensure that the power supply is disconnected to prevent electrical shock or damage to the device. Identify the correct voltage version of your relay (DC12V, DC24V, or AC110-220V) and follow the corresponding wiring diagram carefully.
4.1 Wiring for DC12V / DC24V Models
For DC models, connect the input power to the 'IN+' and 'IN-' terminals, observing polarity. Connect your load (e.g., a fan) to the 'OUT+' and 'OUT-' terminals. The output voltage pral menm jan ak D' voltage.
4.2 Wiring for AC110-220V Models
For AC models, connect the input Live Wire (L) and Neutral Wire (N) to the 'IN L' and 'IN N' terminals, respectively. Connect your AC load to the 'OUT L' and 'OUT N' terminals. Ensure all connections are secure and insulated.
4.3 General Wiring Demonstration
The following video provides a general demonstration of active output wiring for the T3231 Time Delay Relay. This visual guide can assist in understanding the connection process.
4.4 Enstalasyon
The T3231 is designed for embedded installation. Create an opening of 77mm x 39.3mm in your panel or enclosure. Insert the relay into the opening and secure it using appropriate mounting methods (e.g., clips or screws, if provided or compatible with T3230 mounting holes).
5. Operasyon Enstriksyon
The T3231 relay features a dual LED display (red for ON time, blue for OFF time) and touch buttons for configuration. The timing range is 1 to 999, with units of seconds, minutes, or hours.
5.1 Fonksyon bouton
- Bouton ANWO (▲): Ogmante valè a chwazi.
- Bouton DESANN (▼): Decreases the selected value.
- S (Set) Button: Enters setting mode, navigates between parameters, and confirms settings.
- Bouton R (Reyajiste): Resets the timer or exits setting mode without saving changes.
5.2 Setting Delay Times (ON/OFF)
- Peze a S button to enter the setting mode. The display will show a flashing value, indicating it's ready for adjustment.
- Sèvi ak la LEVE (▲) epi DESANN (▼) buttons to adjust the desired ON time (red display).
- Peze S again to move to the OFF time setting (blue display). Adjust using LEVE (▲) epi DESANN (▼).
- Peze S a third time to cycle through timing units (seconds, minutes, hours). Select the desired unit.
- Peze S once more to save the settings and exit the setting mode. The relay will start operating with the new parameters.
5.3 mòd travay
The T3231 supports various working modes, including single delay ON/OFF and infinite loop ON/OFF. The specific method to select these modes is typically integrated into the setting sequence. Refer to the on-screen prompts or a detailed mode selection menu if available on your device.
- Single Delay ON/OFF: The relay activates/deactivates once after a set delay.
- Infinite Loop ON/OFF: The relay continuously cycles between ON and OFF states based on the set times.
- Automatic Trigger: The relay can be configured to start its timing sequence automatically upon power-up or a specific condition.
- Power Off Saving: All configured settings are automatically saved and restored upon power cycling.
6. Antretyen
The T3231 Digital Time Delay Relay is designed for low maintenance. To ensure optimal performance and longevity:
- Kenbe aparèy la pwòp epi san pousyè ak debri. Sèvi ak yon twal mou epi sèk pou netwaye.
- Avoid exposing the relay to extreme temperatures, high humidity, or corrosive environments.
- Regularly check wiring connections to ensure they are secure and free from corrosion.
- Do not attempt to open the sealed enclosure, as this may void any warranty and expose internal components to damage.
NAN. Depanaj
If you encounter issues with your T3231 Digital Time Delay Relay, consider the following troubleshooting steps:
- Pa gen ekspozisyon/Pa gen kouran:
- Check the power supply connection and ensure it matches the relay's specified voltage (DC12V, DC24V, or AC110-220V).
- Verify that the power source is active and providing the correct voltage.
- Relay Not Activating/Deactivating:
- Ensure the load is correctly wired to the 'OUT' terminals and is functioning properly.
- Check the set ON/OFF times and timing units to ensure they are configured as intended.
- Verify that the selected working mode (e.g., single delay, infinite loop) is appropriate for your application.
- Move tan:
- Re-enter the setting mode and carefully verify the ON/OFF times and timing units (seconds, minutes, hours).
- Ensure that the unit synchronization is correctly set if applicable.
- Bouton ki pa reponn:
- Asire w ke aparèy la limen.
- If the device has been exposed to moisture or extreme conditions, allow it to dry or return to normal operating temperature.
Si pwoblèm yo pèsiste apre ou fin eseye etap sa yo, kontakte sèvis kliyan pou plis asistans.
8. Konsèy itilizatè yo
- Volim Double-Checktage: Always confirm the correct operating voltage (DC12V, DC24V, or AC110-220V) before connecting power to avoid damage.
- Ekspozisyon klè: The dual red and blue LED display makes it easy to distinguish between ON and OFF timing settings at a glance.
- Anviwònman tès yo: After configuring new timing parameters, perform a test run with a non-critical load to ensure the relay operates as expected before connecting to your primary application.
- Koneksyon an sekirite: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.
9. Garanti ak sipò
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
Pou plis enfòmasyon oswa asistans, tanpri al gade paj ofisyèl pwodwi a oswa kontakte sèvis kliyan.
