Thermalright LGA1700/AM5 CPU Bending Corrector and Anti-Off Frame Protector User Manual

1. Pwodwi souview

The Thermalright CPU Bending Corrector is an aluminum alloy frame designed to replace the standard CPU Independent Loading Mechanism (ILM) on Intel LGA1700 and AMD AM5 motherboards. Its primary function is to prevent CPU bending, which can occur due to uneven pressure from the stock retention mechanism. By providing uniform pressure across the CPU's Integrated Heat Spreader (IHS), it ensures optimal contact with the CPU cooler, potentially improving thermal performance and stability.

Karakteristik kle:

• CNC Aluminum Construction: Made from high-precision CNC machined aluminum alloy with an anodized, frosted paint finish for durability and aesthetics.
• Konsepsyon Anti-Koub: Corrects CPU curvature and applies uniform pressure to the CPU cover, preventing bending and improving contact.
• Full Fit Trackless Installation: Designed for seamless installation without leaving marks or causing wear on the CPU cover.
• Pwoteksyon izolasyon: Utilizes LOTES original standard specifications for insulation protection feet to prevent wear and ensure electrical safety.
• Pozisyonman presi: Engineered to avoid interference with capacitors and other electronic components on the motherboard.

2. Pake kontni

Tanpri tcheke pake a pou atik sa yo:

• Thermalright CPU Bending Corrector Frame (LGA1700 or AM5 version)
• L-shaped screwdriver (x1)
• Montaj vis (x4)
• TF7 Thermal Paste (x1)

3. Enstalasyon ak Enstalasyon

This section outlines the steps to install the Thermalright CPU Bending Corrector. Ensure your system is powered off and disconnected from the power source before proceeding.

Konpatibilite:

• LGA1700 Version: Compatible with Intel 12th Gen CPUs and motherboards with LGA1700 socket (e.g., H610, B660, Z690 series chipsets).
• AM5 Version: Compatible with AMD AM5 CPUs (e.g., Ryzen 7000 series) and motherboards with AM5 socket (e.g., X670, B650 chipsets).

Note: This product is NOT compatible with LGA1200 or other CPU sockets. Please ensure you have the correct version for your CPU and motherboard.

Etap enstalasyon:

1. Prepare kat manman an: Ensure your motherboard is removed from the PC case or you have sufficient access to the CPU socket area.
2. Remove the Stock ILM: Carefully unlatch and remove the original CPU Independent Loading Mechanism (ILM) frame from your motherboard. This typically involves unscrewing four screws around the CPU socket. Keep these screws in a safe place, as they may be needed for future use or warranty purposes.
3. Clean the CPU and Socket: Gently clean any thermal paste residue from the CPU IHS and ensure the CPU socket is free of dust or debris.
4. Position the CPU: Place your CPU into the socket, ensuring correct orientation.
5. Install the Thermalright Corrector: Place the Thermalright CPU Bending Corrector frame over the CPU, aligning the screw holes with those on the motherboard. Ensure the frame sits flush and does not obstruct any components. The design features precise positioning to avoid capacitors and other electronic parts.
6. Secure the Corrector: Use the provided L-shaped screwdriver and mounting screws to secure the corrector frame to the motherboard. Tighten the screws gradually in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) to ensure even pressure. Do not overtighten.
7. Aplike keratin tèmik: Apply a small amount of the included TF7 thermal paste (or your preferred thermal paste) to the center of the CPU IHS.
8. Enstale refwadisè CPU a: Install your CPU cooler according to its manufacturer's instructions. Ensure the cooler makes good contact with the CPU IHS.

4. Prensip Operasyon yo

The Thermalright CPU Bending Corrector is a passive component that works by modifying the pressure distribution on the CPU. The original CPU retention mechanism can sometimes apply uneven pressure, leading to slight bending of the CPU's Integrated Heat Spreader (IHS). This bending can create microscopic gaps between the CPU and the cooler's base, hindering heat transfer.

By replacing the stock ILM with the precisely machined aluminum alloy frame, the corrector ensures that pressure is applied uniformly across the entire CPU IHS. This uniform pressure helps to flatten any potential bending, maximizing contact area with the CPU cooler and thus improving thermal conductivity and overall cooling efficiency. It also acts as an anti-off frame protector, securely holding the CPU in place.

5. Antretyen

The Thermalright CPU Bending Corrector requires minimal maintenance due to its durable aluminum alloy construction.

• Netwayaj: If you need to remove the corrector for any reason (e.g., CPU upgrade or cleaning), gently wipe it with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the anodized finish.
• Enspeksyon: Periodically inspect the frame for any signs of damage or deformation. While designed for durability, extreme force or improper handling could cause issues.
• Pat tèmik: When reinstalling the CPU or cooler, always reapply fresh thermal paste.

NAN. Depanaj

Pwoblèm komen ak solisyon:

• Poor Thermal Performance After Installation:
  • Kòz: Insufficient or improperly applied thermal paste, or uneven tightening of the corrector/cooler screws.
  • Solisyon: Remove the CPU cooler and corrector. Clean the CPU IHS and cooler base thoroughly. Reapply thermal paste and reinstall the corrector and cooler, ensuring screws are tightened evenly in a diagonal pattern.
• System Not Booting / CPU Error:
  • Kòz: CPU not seated correctly, or damage to the CPU/socket pins during installation.
  • Solisyon: Carefully remove the corrector and CPU. Inspect the CPU pins (if applicable) and motherboard socket for any damage. Reseat the CPU carefully, ensuring correct orientation, and then reinstall the corrector. If damage is found, contact your CPU/motherboard manufacturer.
• Corrector Does Not Fit:
  • Kòz: Incorrect version of the corrector for your CPU socket (e.g., LGA1700 corrector on an AM5 motherboard, or attempting to use on an unsupported socket like LGA1200).
  • Solisyon: Verify your CPU and motherboard socket type. Ensure you have purchased the correct Thermalright CPU Bending Corrector version (LGA1700 or AM5). This product is not compatible with LGA1200.

7. Espesifikasyon

8. Garanti ak sipò

The Thermalright CPU Bending Corrector comes with a 6-ane garanti apati dat acha a, ki kouvri domaj fabrikasyon. Tanpri konsève prèv acha ou pou reklamasyon garanti.

Sipò Kliyan:

For technical assistance, warranty claims, or any questions regarding the product, please contact your retailer or the Thermalright customer support directly. Refer to the official Thermalright websit pou enfòmasyon kontak.

9. Konsèy itilizatè yo

• Verifye konpatibilite de fwa: Always confirm that you have the correct version (LGA1700 or AM5) for your specific CPU and motherboard before attempting installation. Using the wrong version can cause damage.
• Manyen dou: While the frame is robust, handle your CPU and motherboard components with care during installation to prevent accidental damage to pins or other sensitive parts.
• Even Pressure is Key: When tightening the screws for both the corrector and your CPU cooler, ensure you apply even pressure by tightening them incrementally in a cross-pattern. This is crucial for optimal thermal contact and to prevent stress on the CPU.
• Fresh Thermal Paste: Always use fresh thermal paste when installing or reinstalling your CPU cooler. The included TF7 thermal paste is a good option.