Manyèl Enstriksyon pou Sonèt Pòt Videyo San Fil UCOCARE P1

1. Entwodiksyon

Thank you for choosing the UCOCARE P1 Wireless Video Doorbell. This device is designed to enhance your home security by providing 2K/4MP video surveillance, two-way audio communication, and smart detection features. This manual will guide you through the setup, operation, and maintenance of your new video doorbell and its accompanying chime.

2. Enfòmasyon sou Sekirite

• Ensure the device is installed in a location where it is protected from extreme weather conditions, although it is IP66 waterproof.
• Use only the specified charging methods and accessories to prevent damage or fire.
• Kenbe aparèy la ak konpozan li yo lwen timoun yo.
• Pa eseye demonte oswa repare aparèy la tèt ou. Kontakte sipò kliyan pou asistans.

3. Pake kontni

Tanpri verifye pake a pou asire w ke tout atik yo la:

• UCOCARE P1 Wireless Video Doorbell
• Sonèt andedan kay la san fil
• Mounting Support ak Vis
• USB Chaje Kab
• Manyèl Itilizatè (dokiman sa a)

4. Pwodwi souview

The UCOCARE P1 Video Doorbell features a high-resolution camera, motion sensor, microphone, speaker, and a doorbell button. The wireless chime provides audible alerts inside your home.

5. Espesifikasyon

6. Enstriksyon Enstalasyon

6.1. Chaje Sonèt Pòt la

Before initial use, fully charge the doorbell using the provided USB cable. The 10000mAh battery provides up to 180 days of standby time on a single charge.

6.2. Enstalasyon Aplikasyon an ak Koneksyon Wi-Fi

The doorbell connects to your home Wi-Fi network via the 'CloudEdge' app. Please note that only 2.4GHz Wi-Fi networks are supported (5G Wi-Fi is NOT supported).

1. Reset the Doorbell: Long press the Reset Key on the side of the doorbell until the indicator light on the front button flashes RED.
2. Telechaje App: Download and install the 'CloudEdge' app on your smartphone.
3. Ajoute Aparèy: Open the 'CloudEdge' app, tap 'Add Device', and select 'Smart Doorbell'.
4. Antre detay Wi-Fi yo: Select your 2.4GHz Wi-Fi network and enter the exact Wi-Fi name and password.
5. Fè eskanè kòd QR: The app will generate a QR code. Place your phone with the QR code in front of the doorbell camera at a distance of 5-8 inches (15-20cm). A tone will be heard when successfully scanned.
6. Konekte: Tap 'Next' on your phone. Wait for the indicator light on the doorbell to turn solid blue, indicating a successful connection.

6.3. Konekte sonèt la

After connecting the doorbell to the app, pair the wireless chime:

1. Chime Pairing Mode: Long press the volume button on the chime until its indicator light starts flashing blue.
2. Inisye pè: Press the front button of the doorbell.
3. Konfimasyon: The indicator light on the chime will turn solid blue, and the doorbell will ring, indicating successful pairing.

6.4. Enstalasyon Fizik

Install the doorbell at an appropriate height near your door. Ensure the chosen location has good Wi-Fi signal strength for optimal performance.

7. Operasyon Enstriksyon

7.1. Viv View ak Odyo De-fason

Access the live video feed from your doorbell through the CloudEdge app. You can see, hear, and talk to visitors in real-time.

7.2. Smart Detection

The doorbell features advanced Person/Vehicle Smart Detection to reduce false alerts. Customize detection settings in the app:

• Custom Zone: Defini zòn espesifik pou deteksyon mouvman.
• Custom Sensitivity: Adjust the sensitivity level to suit your environment.
• Orè Custom: Set specific times for motion detection to be active.
• Custom Working Mode: Configure different modes for various scenarios.

7.3. Warning Features

When motion is detected, the doorbell can trigger an alarm (siren) and send push notifications to your phone. You can also use the two-way talk feature to warn off unwanted visitors.

7.4. Anrejistreman ak Depo Videyo

The doorbell supports local storage via a Micro SD card (up to 128GB, not included) and offers free 7-day cloud storage. All connections are secured with 256-bit encryption.

7.5. Pataje Aksè

You can share access to your doorbell's live feed and recordings with up to 7 users and connect up to 6 online cameras within the app.

8. Antretyen

• Chaje batri: Recharge the doorbell battery when the app indicates a low battery level. A full charge takes approximately 8 hours.
• Netwayaj: Gently wipe the camera lens and doorbell surface with a soft, dry cloth to remove dust and smudges. Do not use harsh chemicals or abrasive materials.
• Mizajou mikrolojisyèl: Regularly check the CloudEdge app for available firmware updates to ensure optimal performance and security.

NAN. Depanaj

• Sonèt pòt la pa konekte ak Wi-Fi a: Ensure you are using a 2.4GHz Wi-Fi network. Reset the doorbell and try the connection process again. Check your Wi-Fi password for accuracy.
• Move kalite videyo: Ensure the doorbell has a strong Wi-Fi signal. Check for obstructions in front of the camera lens.
• Frequent false alerts: Adjust the motion detection sensitivity and define custom detection zones in the app to minimize unwanted notifications.
• Klòch la pa sonnen: Ensure the chime is paired correctly with the doorbell (refer to Section 6.3). Check the chime's volume settings.
• Batri a vide byen vit: Viv souvan view access, high motion detection sensitivity, and poor Wi-Fi signal can increase battery consumption. Adjust settings as needed.

10. Konsèy itilizatè yo

• Wi-Fi optimal: For the best experience, ensure your doorbell is installed within a strong 2.4GHz Wi-Fi signal range. Consider a Wi-Fi extender if necessary.
• Deteksyon Mouvman: Experiment with different motion detection sensitivity levels and custom zones to find the perfect balance between security and minimizing unnecessary alerts.
• Depo nwaj: Utilize the free 7-day cloud storage for a convenient backup of important events, especially if you don't have a local SD card installed.
• Entegrasyon kay entelijan: Connect your UCOCARE P1 doorbell with Alexa or Google Assistant for voice control and integration into your smart home ecosystem.

11. Garanti ak sipò

UCOCARE products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or the official UCOCARE website. Please have your product model (P1) and purchase details ready when contacting support.