Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your M6H Electric Bike LCD Display Meter and 36V 350W Sine Wave Controller. Please read this manual carefully before use to ensure proper function and longevity of your product.
Enstalasyon ak Enstalasyon
The M6H LCD Display and Sine Wave Controller are designed for universal electric bike and scooter applications. Professional installation is recommended due to the electrical nature of the components.
Kontni pake:
- 1 x M6H LCD Display
- 1 x 36V 350W Sine Wave Controller
Etap enstalasyon:
- Mount the LCD Display: Securely attach the M6H LCD Display to your bicycle handlebar. The display is compatible with handlebar sizes 22.2MM, 25.4MM, 28.6MM, and 31.8MM. Ensure the display is positioned for optimal visibility and accessibility.
- Konekte kontwolè a: The Sine Wave Controller features multiple color-coded wires for connection to the motor, battery, display, throttle, and other e-bike components. Carefully match each wire to its corresponding function on your e-bike system. Refer to your e-bike's wiring diagram for specific connections.
- Connect the LCD Display to the Controller: Connect the communication cable from the M6H LCD Display to the designated port on the Sine Wave Controller. The communication method is UART.
- Secure all Connections: Ensure all electrical connections are tight and properly insulated to prevent short circuits or damage.
- Premye pouvwa-up: After all connections are made, power on your e-bike system. The LCD display should illuminate and show initial readings.
Enstriksyon Operasyon
The M6H LCD Display provides essential information and control over your electric bike's functions.
Ekspozisyon Fonksyon:
- Ekspozisyon vitès: Montre vitès aktyèl la.
- Endikatè batri: Montre nivo chaj batri ki rete a.
- Fonksyon ranfòse: Activates a power boost mode.
- Boost Gear: Indicates the current level of pedal assist (PAS).
- Subtotal Mileage/Total Mileage: Tracks trip distance and total distance traveled.
- Tan Kouri: Shows the duration of the current ride.
- Metric Conversion: Allows switching between metric (km/h, km) and imperial (mph, miles) units.
- Siyal pou fot: Displays error codes or warnings if issues are detected.
Fonksyon chaj USB:
The display is equipped with a USB charging port, providing 5V/500MA output for charging small electronic devices.
Antretyen
Regular maintenance ensures the optimal performance and longevity of your M6H display and controller.
- Netwaye ekspozisyon an: Sèvi ak yon mou, damp cloth to gently wipe the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
- Pwoteje kont eleman: While designed for outdoor use, avoid prolonged exposure to heavy rain or direct water spray. Ensure the display and controller are kept as dry as possible.
- Tcheke Koneksyon: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage.
- Evite enpak: Protect the display from physical impact or drops, which can cause internal damage or screen cracks.
Depanaj
If you encounter issues with your M6H LCD Display or Sine Wave Controller, refer to the following common problems and solutions:
- Ekran an pa limen:
- Tcheke koneksyon prensipal kouran an ki soti nan batri a rive nan kontwolè a.
- Ensure the connection between the display and controller is secure.
- Verify the e-bike battery has sufficient charge.
- Incorrect Speed or Mileage Readings:
- Check the speed sensor connection to the controller and ensure the sensor is properly aligned with the magnet on the wheel.
- Confirm that the wheel circumference setting (if adjustable) is correct.
- Motor Not Responding or Irregular Power:
- Check all motor phase wire connections and Hall sensor connections to the controller.
- Ensure the throttle or PAS sensor is correctly connected and functioning.
- The display's 'Fault Prompt' may indicate a specific error code. Consult a professional or your e-bike's main manual for interpretation of these codes.
- Chaje USB a pa fonksyone:
- Ensure the e-bike system is powered on.
- Check the USB cable and the device being charged.
For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult a qualified e-bike technician.
Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl pwodwi | M6H LCD Instrument + Sine Wave Controller |
| Volim Adaptatiftage | 24V / 36V / 48V / 60V |
| Pouvwa kontwolè | 350W |
| Shell Materyèl | ABS and Metal Parts |
| Metòd kominikasyon | UART |
| USB Chaje Sòti | 5V / 500MA |
| Koulè | Nwa |
| Display Dimensions (L x W x H) | 98.1 x 61.9 x 24.6 MM |
| Applicable Handlebar Sizes | 22.2MM / 25.4MM / 28.6MM / 31.8MM |
| Pwa pake | Apeprè 0.51 kg |
| Dimansyon pake (L x W x H) | 12 x 8 x 5 cm |
Konsèy itilizatè
- Always ensure your e-bike's battery is fully charged before long rides to maximize the utility of the display and controller.
- Familiarize yourself with the display's various modes and settings to optimize your riding experience.
- Keep the display screen clean for clear visibility, especially in bright sunlight.
- If you notice any unusual behavior or error messages, refer to the troubleshooting section or consult a professional.
Garanti ak sipò
For any product-related inquiries, technical support, or warranty claims, please contact your original seller or the manufacturer. Keep your purchase receipt as proof of purchase.
Please note that product appearance, color, and printed text may vary slightly due to different manufacturing batches, but this will not affect the product's functionality or use.
