1. Entwodiksyon
Welcome to the realme Buds Clip OWS Ear Clip Headphones user manual. These headphones are designed to provide a superior audio experience with advanced features such as AI ENC Call Noise Cancellation, AI Translator, and a comfortable ear-fitting design. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new realme Buds Clip headphones.
Image: realme Buds Clip headphones in their charging case, showcasing the design and key features.
2. Pake kontni
Tanpri tcheke kare a pou atik sa yo:
- realme Buds Clip x 1 pair
- Charging case x 1 unit
- User guide and warranty card x 1 unit
Note: The included Type-C charging cable only supports the charging function. A power adapter is not included in the accessories.
3. Pwodwi souview
The realme Buds Clip headphones offer a range of features designed for convenience and high-quality audio:
- AI New Experience: AI Translator, AI ENC Call Noise Cancellation.
- Eksperyans oditif: 11mm Dual-Magnet Large-Amplitude Speaker, Sound-Leap Directional Tech, NextBass Algorithm.
- Seamless Experience: Swift Pair, Dual-device Connection 2.0, 45ms Ultra-low Latency.
- Dirab: IP55 Dust & Water Resistance.
- Lavi batri: Jiska 36 èdtan lekti an total ak bwat chaje a.
- Koneksyon: Bluetooth 5.4.
- Konsepsyon: Ear-fitting Design, Titanium-fit Design, 5.3g Paper-light Weight per earbud.
Image: Illustration of the 11mm Dynamic Bass Driver, highlighting its components for deep bass.
4. Enstalasyon
4.1. Chaje kas ekoutè yo
Before first use, ensure your realme Buds Clip and charging case are fully charged.
- Mete ekoutè yo nan ka chaje a.
- Connect the charging case to a power source using a Type-C charging cable.
- Limyè endikatè ki sou bwat chaje a ap montre eta chaje a.
A full charge for the charging case and earbuds takes approximately 120 minutes. Earbuds alone take about 60 minutes for a full charge.
4.2. Mete kas ekoutè yo
The realme Buds Clip feature an ear-fitting and titanium-fit design for comfortable and secure wear.
- Idantifye ekoutè gòch (L) ak dwa (R).
- Gently clip each earbud onto your ear, ensuring a snug and comfortable fit.
- Adjust the position until the sound is clear and the earbud feels secure.
Image: Illustration demonstrating the ear-fitting design for comfortable wear.
4.3. Pairing ak yon Aparèy
Your realme Buds Clip can connect to devices via Bluetooth 5.4 and supports Swift Pair for Windows PCs.
- Pwen inisyal: Louvri bwat chaje a. Ekoutè yo ap antre otomatikman nan mòd koneksyon.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and search for "realme Buds Clip".
- Select the headphones to connect. You will hear a confirmation tone once connected.
- Swift Pair (for Windows PCs): Open the charging case near a Windows 10 (version 1803 or later) PC. A notification will appear on your PC to connect. Follow the on-screen prompts. This feature may need to be enabled manually on your PC.
Image: Illustration showing the Swift Pair feature connecting earbuds to a laptop.
4.4. Dual-device Connection 2.0
The realme Buds Clip can simultaneously connect to two devices for a seamless listening experience.
- After pairing with two devices, the earbuds will automatically switch between them based on audio playback.
- To switch audio manually, pause playback on the currently active device and start playback on the other connected device.
Image: Illustration depicting simultaneous connection of earbuds to a smartphone and a tablet.
5. Operasyon Enstriksyon
5.1. Kontwòl taktil entelijan
The earbuds feature smart touch controls for various functions. The recognition area is typically at the top of the earbuds. Refer to the realme Link app for customizable gestures.
- Jwe/Poz: Single tiyo.
- Pwochen Track: Double tiyo.
- Track Previous: Triple tiyo.
- Reponn/Fen Apèl: Single tiyo.
- Rejte apèl: Peze epi kenbe.
- Switch Noise Cancellation Modes: Press and hold (customizable via app).
5.2. AI ENC Call Noise Cancellation
The AI ENC (Environmental Noise Cancellation) feature enhances call clarity by filtering out background noise.
- Fonksyon sa a aktive otomatikman pandan apèl yo.
- Six integrated microphones work with AI algorithms to intelligently enhance voices and filter out ambient noise.
Image: Diagram illustrating the microphone placement (FF Mic, FB Mic) for AI ENC Call Noise Cancellation.
5.3. AI Translator
The AI Translator feature provides real-time language translation. This function typically requires the realme Link app and an active internet connection.
- Open the realme Link app and navigate to the AI Translator feature.
- Follow the in-app instructions to select languages and initiate translation.
Image: Illustration of the AI Translator feature in use, showing real-time translation.
5.4. Ultra-low Latency Mode
For gaming or video playback, activate the 45ms Ultra-low Latency mode to synchronize audio and visuals.
- This mode can usually be activated through the realme Link app or via a specific touch gesture (check app for customization).
Image: Earbuds used during mobile gaming, emphasizing the 45ms Super-Low Latency feature.
5.5. realme Link App
Personalize your experience by customizing EQ modes, spatial audio, and upgrading firmware through the realme Link app. The app allows you to tailor your earbuds to your preferences.
Image: Screenshot of the realme Link App interface showing earbud settings and customization options.
6. Antretyen
6.1. Netwayaj
- Netwaye ekoutè yo ak bwat chaje a regilyèman avèk yon twal mou, sèk, epi ki pa gen pousyè.
- Pa sèvi ak pwodui chimik piman bouk, solvang netwayaj, oswa detèjan fò.
- Asire w ke kontak chaje yo sou tou de ekoutè yo ak sou bwat la pwòp epi sèk.
6.2. Rezistans dlo ak pousyè (IP55)
The realme Buds Clip earbuds are rated IP55 for dust and water resistance, meaning they are protected against limited dust ingress and low-pressure water jets from any direction.
- IP55 resistance is not permanent and may decrease with daily use.
- Do not charge the earbuds while wet.
- Damage due to liquid and solid particle ingress is not covered by the warranty.
- The charging case does not have the same level of resistance; keep it dry.
Image: Illustration showing earbuds being splashed with water, demonstrating IP55 resistance.
6.3. Swen batri
- Evite ekspoze aparèy la nan tanperati ekstrèm.
- Store the earbuds and case in a cool, dry place when not in use.
- Chaje aparèy la regilyèman pou kenbe batri a an bon eta, menm si ou pa itilize li souvan.
NAN. Depanaj
7.1. Pwoblèm Koneksyon
- Ekoutè yo pa konekte: Ensure the earbuds are charged and within range of your device. Try placing them back in the case, closing it, and reopening to re-enter pairing mode.
- Se yon sèl ekoutè k ap fonksyone: Place both earbuds back in the charging case, close the lid for a few seconds, then reopen. Check the realme Link app for individual earbud status.
- Cannot connect to a new device: Ensure the earbuds are not already connected to another device. Turn off Bluetooth on previously connected devices or manually disconnect.
7.2. Pwoblèm odyo
- Pa gen son: Check the volume level on both your device and the earbuds. Ensure the earbuds are properly connected.
- Volim ki ba oswa kalite son ki pa bon: Clean any debris from the earbud speakers. Ensure the earbuds are correctly seated in your ears.
7.3. Pwoblèm Chaje
- Ekoutè yo pa chaje: Ensure the earbuds are correctly placed in the charging case and the charging contacts are clean. Check if the charging case itself has power.
- Ka chaje pa chaje: Asire w kab Kalite-C a byen konekte ak bwat la ak sous kouran an. Eseye yon lòt kab oswa adaptè kouran.
7.4. Reyajiste ekoutè yo
If you encounter persistent issues, a factory reset may resolve them. Refer to the realme Link app or the official realme support website for specific reset instructions for your model.
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Non pwodwi | realme Buds Clip |
| AI Karakteristik | AI Translator, AI ENC Call Noise Cancellation |
| Anile bri | Anilasyon Bri Apèl AI ENC |
| Eksperyans oditif | 11mm Dual-Magnet Large-Amplitude Speaker, Sound-Leap Directional Tech, NextBass Algorithm |
| Koneksyon | Swift Pair, Dual-device Connection 2.0, 45ms Ultra-low Latency |
| Pousyè & Dlo Rezistans | IP55 (koutè sèlman) |
| Kapasite batri (Ka chaje) | 530mAh |
| Battery Capacity (Single Headset) | 45mAh |
| Bluetooth vèsyon | 5.4 |
| Kodèk Bluetooth | SBC, AAC |
| Pwotokòl Bluetooth | HFP, A2DP, AVRCP |
| Max Music Playback (Earbuds only) | 7 hours (50% volume, normal mode) |
| Max Music Playback (Earbuds + Case) | 36 hours (50% volume, normal mode) |
| Design | Ear-fitting Design, Titanium-fit Design, 5.3g Paper-light Weight |
| Chaje Metòd | Ka chaje |
Note: All charging and battery life data are from realme Lab tests. Actual performance may vary depending on usage conditions, environment, and specific settings.
9. Konsèy itilizatè yo
- Customize with realme Link App: For the best experience, download and use the realme Link app to personalize sound profiles, update firmware, and manage features like noise cancellation modes and touch controls.
- Secure Fit: Experiment with the ear-fitting design to find the most secure and comfortable position for optimal sound quality and to prevent accidental drops.
- Netwayaj regilye: Keep the earbuds and charging contacts clean to ensure reliable charging and clear audio.
10. Garanti ak sipò
Your realme Buds Clip headphones come with a standard manufacturer's warranty. Please refer to the warranty card included in your package for detailed terms and conditions, including the warranty period and coverage.
For technical support, service inquiries, or to report issues, please visit the official realme support website or contact their customer service. Contact information can typically be found on the realme websit la oubyen nan dokimantasyon pwodwi ou a.
