1. Entwodiksyon
The Anern AN-SCI-ECO Series Hybrid Solar Inverter is a versatile power solution designed to integrate solar power, utility power, and battery power to provide continuous energy supply. Featuring a pure sine wave output, it ensures compatibility with a wide range of loads. This series includes models AN-SCI-ECO-4200W (4.2KW, 24V) and AN-SCI-ECO-6200W (6.2KW, 48V), both equipped with a 120A MPPT solar charge controller and dual AC outputs. The inverter can operate with or without a battery and includes smart features like automatic lithium battery activation via PV and Wi-Fi monitoring for iOS and Android devices.
2. Karakteristik kle
- Pure sine wave output for broad load compatibility.
- Can operate with or without a battery.
- One-key factory parameter recovery function.
- Automatic lithium battery activation function via PV.
- Integrated 120A MPPT solar charge controller.
- Segondè PV opinyon voltage ranje (60-450VDC).
- Twous anti-pousyè entegre pou plis rezistans nan anviwònman difisil.
- Smart battery charging design to optimize battery lifespan.
- Kapasite doub pwodiksyon AC.
- Wi-Fi monitoring available for iOS and Android devices.
- Multiple protection features: Overcurrent, Low Voltage, Short Circuit, Overheating, Overload, and Automatic Frequency Range.
- High-resolution RGB LCD display for easy readability in various lighting conditions.
3. Enstalasyon ak Enstalasyon
Before installation, ensure the inverter is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Refer to the detailed wiring diagrams in the full manual for specific connection instructions. Professional installation is recommended.
3.1. Koneksyon batri
The inverter supports various battery types including GEL, FLD (Flooded), Li-ion (Lithium-ion), and AGM. Ensure correct polarity when connecting batteries. The inverter features an automatic lithium battery activation function via PV, simplifying the setup for lithium battery systems.
3.2. Solar PV Input Connection
Connect your solar panels to the designated PV input terminals. The inverter features a wide PV input voltage range of 60-450VDC and an integrated 120A MPPT solar charge controller to maximize solar energy harvesting.
3.3. AC Input and Output Connections
Connect the utility grid AC input to the inverter. For loads, utilize the dual AC output terminals. The main output and secondary output combined should not exceed the inverter's rated power (e.g., 6.2KW for the AN-SCI-ECO-6200W model).
4. Operasyon
4.1. Powering On / Off
Follow the sequence in the full manual for safely powering on and off the inverter system. Ensure all connections are secure before powering on.
4.2. Ekran LCD ak Paramèt
The inverter features a high-resolution RGB LCD screen that is easy to read even in daylight. It displays various operational parameters and status indicators. Navigate through the menus using the control buttons to monitor system performance and adjust settings as needed. The display uses an RGB language of signs for different operation modes.
4.3. Siveyans Wi-Fi
The inverter supports Wi-Fi monitoring, allowing you to control and monitor the system operation via a mobile application available for both iOS and Android devices. Refer to the Wi-Fi module manual for setup instructions.
4.4. Reset faktori
A one-key factory parameter recovery function is available to restore the inverter to its default settings if necessary.
5. Antretyen
The Anern AN-SCI-ECO Series inverters are designed for low maintenance. Regular checks should include:
- Netwayaj: Periodically clean the inverter's exterior to prevent dust accumulation, especially around ventilation openings.
- Koneksyon: Ensure all electrical connections remain tight and free from corrosion.
- Sante batri: The smart battery charging design helps optimize battery life. However, regular inspection of battery terminals and electrolyte levels (for flooded batteries) is recommended.
- Anviwònman: Ensure the operating environment remains within specified temperature and humidity ranges. The built-in anti-dust kit helps protect internal components in harsh environments.
NAN. Depanaj
The inverter is equipped with multiple protection features to ensure safe and reliable operation. If the inverter encounters an issue, it will typically display an error code or indicator on the LCD screen. Common issues and their potential causes/solutions include:
- Pwoteksyon Surkouran: Indicates excessive current draw. Check connected loads and wiring for short circuits.
- Low Voltage Pwoteksyon: Occurs if battery voltage drops below a safe threshold. Check battery charge level and health.
- Pwoteksyon Kout Awondisman: Activated when a short circuit is detected in the output. Disconnect loads and inspect wiring.
- Pwoteksyon Surchof: The inverter's internal temperature is too high. Ensure adequate ventilation and clear any obstructions around the cooling fins.
- Pwoteksyon Surcharge: Connected loads exceed the inverter's capacity. Reduce the total load connected to the inverter.
- Automatic Frequency Range Adjustment: The inverter will automatically adjust frequency within its operational range (50/60Hz). If frequency issues persist, check the AC input source.
For persistent issues or error codes not listed, refer to the comprehensive troubleshooting guide in the full product manual or contact customer support.
7. Espesifikasyon
The following table details the specifications for the Anern AN-SCI-ECO Series Hybrid Solar Inverters:
| Paramèt | AN-SCI-ECO-4200W | AN-SCI-ECO-6200W |
|---|---|---|
| Jeneral | ||
| Rated pouvwa | 4200W | 6200W |
| Sòti Ond | Vag sinis pi | |
| Sètifikasyon | CE, FCC, RoHS | |
| Se yon aparèy entelijan | Wi | |
| Operational PV Input (DC) | ||
| Max Solar PV Power | 4200W | 6500W |
| Nominal DC Voltage / Max DC Voltage | 360VDC / 500VDC | |
| Kòmanse Voltage / Inisyal Feeding Voltage | 90VDC / 120VDC | |
| MPPT Range @ Operating Voltage | 60-450VDC | |
| Max Solar Input Current | 18A | 22A |
| Grid-Tied Output (AC) | ||
| Nominal Sòti Voltage | 220/230 / 240VAC | |
| Sòti Voltage Range | 195.5-253VAC | |
| Nominal Sòti Kouran | 18.2A | 27.0A |
| Faktè pouvwa | > 0.99 | |
| Range frekans gri | 49-51±1Hz / 59-61±1Hz | |
| Efikasite | ||
| Efikasite Konvèsyon Maksimòm (Solè pou AC) | 98% | |
| Dual Output Modes | ||
| Chaj konplè | 4200W | 6200W |
| Chaj prensipal | 4200W | 6200W |
| Secondary Load (Battery Mode) | 1400W | 2067W |
| Main Load Cut-off Voltage | 22VDC | 44VDC |
| Main Load Recovery Voltage | 26VDC | 52VDC |
| Bypass Operasyon | ||
| Full Bypass AC / Automatic Transfer | 120-140VAC / 180VAC | |
| Akseptab AC Antre Voltage Range | 90-280VAC oswa 170-280VAC | |
| Max AC Antre Kouran | 30A | 40A |
| Frekans Operasyon nominal | 50/60Hz | |
| Nominal pouvwa | 8400W | 12400W |
| Inverter Mode (AC) | ||
| Nominal pwodiksyon pouvwa | 220/230 / 240VAC | |
| Efikasite (DC pou AC) | 94% | |
| Batri & Chaje | ||
| Nominal DC Voltage | 24VDC | 48VDC |
| Maksimòm Kouran Chaje Solè | 120A | |
| Max AC chaje aktyèl | 100A | |
| Fizik ak anviwònman | ||
| Dimensions (D x W x H mm) | 420 * 350 * 110mm | 450 * 350 * 110mm |
| Pwa nèt (kg) | 10 | 12 |
| Entèfas kominikasyon | WIFI | |
| Imidite | 5% a 95% imidite relatif (ki pa kondanse) | |
| Tanperati Fonksyònman | -10°C - 50°C | |
| Tanperati Depo | -15°C - 60°C | |
Nòt: Dimensions and weight may vary slightly between models. For precise measurements, refer to the specific model's documentation.
8. Konsèy itilizatè yo
- Siveyans Adistans: Utilize the Wi-Fi monitoring feature with the dedicated mobile app (iOS/Android) to keep track of your inverter's performance and status from anywhere.
- Fleksibilite batri: The ability to operate without a battery can be useful for direct solar-to-load applications during daylight hours, but for continuous power, a compatible battery bank is essential.
- Aktivasyon Batri Lityòm: Pran avantage of the automatic lithium battery activation via PV for a smoother setup process with lithium-ion batteries.
- Dual Output Management: When using the dual AC outputs, ensure the combined load does not exceed the inverter's total rated power to prevent overloads.
9. Garanti ak sipò
The Anern AN-SCI-ECO Series Hybrid Solar Inverter comes with a 2-year warranty. For technical support, warranty claims, or further assistance, please contact your authorized dealer or the manufacturer's customer service. Ensure you have your product model and serial number ready when contacting support.