1. Entwodiksyon
This manual provides essential information for the FSR Model GT 1/7 Mustang GT Flat Sports RC Car Shell. It covers product overview, specifications, installation guidelines, maintenance, and important safety warnings. This product is designed as a replacement or upgrade car shell for compatible 1/7 scale RC vehicles.
2. Pwodwi souview
The FSR Model GT 1/7 Mustang GT Flat Sports Car Shell is a highly detailed, simulation PC (Polycarbonate) car shell. It features good toughness, making it resistant to breakage, and comes pre-finished with integrated lights and anti-drop features. The shell is pre-drilled with holes for easy mounting on compatible chassis.
Figi 2.1: Devan view of the FSR Model GT Mustang RC car shell.
Figi 2.2: Dèyè view of the FSR Model GT Mustang RC car shell.
Figi 2.3: Side view of the FSR Model GT Mustang RC car shell. This product is the shell only, not a complete car.
3. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Kalite pwodwi | RC Car Shell (Upgrade Part/Accessory) |
| Kantite | 1 pcs |
| Materyèl | Plastic (PC - Polycarbonate) |
| Koulè | Red Body Only |
| Konpatibilite | Suitable for Flying God Mustang GT 1/7 flat sports car |
| Longè | 710mm |
| Anpatman | 410mm |
| Front Wheel Width | 310mm |
| Middle Width | 310mm |
| Rear Wheel Width | 330mm |
| Karakteristik | Finished product with light and anti-drop, pre-drilled holes |
| Laj Rekòmande | 3-6Y, 6-12Y, 14+y |
| Orijin | Lachin tè pwensipal |
| Dimansyon pake a (apeprè) | Longè: 75cm, Lajè: 45cm, Wotè: 39cm |
| Pwa pake a (apeprè) | 3.5 kg |
4. Enstalasyon ak Enstalasyon
This car shell is designed for direct fitment on the Flying God Mustang GT 1/7 flat sports car chassis. It comes as a finished product with pre-drilled holes, simplifying the installation process.
- Preparasyon: Ensure your RC car chassis is clean and free from any debris or old body mounts that might obstruct the new shell.
- Aliyman: Carefully align the pre-drilled holes on the FSR Model GT car shell with the body posts on your RC car chassis.
- Securement: Use appropriate body clips (not included, typically supplied with the chassis) to secure the shell firmly onto the body posts. Ensure all four posts are securely fastened.
- Light Connections (if applicable): If your chassis supports external lights and the shell includes light buckets, connect the shell's light wiring to your RC car's lighting system as per your chassis manual.
No complex wiring or drilling is typically required for this pre-finished shell.
5. Operasyon Enstriksyon
Once installed, the car shell requires no specific operational steps. Its primary function is aesthetic and protective. However, consider the following during use:
- Pwoteksyon enpak: While the shell has good toughness and anti-drop features, excessive impacts can still cause damage. Avoid high-speed collisions.
- Faktè anviwònman: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the plastic's integrity and paint finish over time.
6. Antretyen
Regular maintenance will help preserve the appearance and longevity of your car shell.
- Netwayaj: Sèvi ak yon mou, damp cloth to wipe down the shell after use to remove dirt, dust, and debris. For stubborn grime, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
- Enspeksyon: Periodically inspect the shell for any cracks, scratches, or damage. Pay attention to mounting points and light fixtures.
- Depo: Store the shell in a cool, dry place away from direct sunlight when not in use.
NAN. Depanaj
- Shell does not fit: Double-check that your RC car chassis is indeed the Flying God Mustang GT 1/7 flat sports car or a compatible model with a 410mm wheelbase. Verify that the body posts are correctly installed on your chassis.
- Limyè yo pa mache: Ensure all light connections are secure and correctly wired to your RC car's lighting system. Check your RC car's battery and lighting controller for proper function.
- Damage after minor impact: While tough, the shell is not indestructible. Inspect the impact area for signs of stress or cracking. Minor damage may be repairable with specialized plastic adhesives.
8. Konsèy itilizatè yo
- Confirm Product Type: Please note that this product is the car shell only. It does not include the complete RC car chassis, wheels, electronics, or other components. Ensure you have a compatible chassis for installation.
- Manyen ak Swen: Despite its toughness, always handle the shell carefully during installation and removal to avoid accidental scratches or damage to the paint finish.
9. Enfòmasyon sou Sekirite
⚠ AVÈTISMAN: Pwodui sa a ka ekspoze w a pwodui chimik tankou ftalat (DEHP), ke Eta Kalifòni konnen ki lakòz kansè ak domaj nesans oswa lòt pwoblèm repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.
Always supervise children when they are using or handling RC car parts. Keep small parts away from young children to prevent choking hazards.
10. Garanti ak sipò
For any questions, technical support, or warranty inquiries regarding your FSR Model GT 1/7 Mustang GT RC Car Shell, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
