1. Entwodiksyon
This manual provides detailed instructions for the installation, operation, and maintenance of your Yottamaster M.2 SSD Enclosure. This device is designed to convert an M.2 NVMe or SATA SSD into a portable external storage solution, offering high-speed data transfer capabilities.
Figure 1: Yottamaster M.2 SSD Enclosure supporting both NVMe and SATA SSDs.
2. Enfòmasyon sou Sekirite
- Pa ekspoze aparèy la nan dlo oswa imidite twòp.
- Evite tanperati ekstrèm.
- Do not attempt to disassemble or modify the enclosure, as this may void the warranty and cause damage.
- Kenbe soti nan atenn timoun yo.
- Handle SSDs with care to prevent electrostatic discharge.
3. Pake kontni
Tanpri verifye sa ki nan pake a lè w resevwa li:
- Yottamaster M.2 SSD Enclosure
- 2-in-1 Data Cable (USB-A to USB-C and USB-C to USB-C)
- Tèmik Pad
- Manyèl Itilizatè (dokiman sa a)
Figure 2: Product packaging and included items.
4. Espesifikasyon
| Karakteristik | Deskripsyon |
|---|---|
| Non mak | YOTTAMASTER |
| Nimewo Modèl | YTPWM2 |
| Entèfas ekstèn | USB |
| Ka Materyèl | ABS+Aluminium Alloy |
| Sipòte Kapasite Disk Di | Jiska 4TB |
| Depo SSD | Jiska 4TB |
| Gwosè | 1.8" (124*35*14MM) |
| Specification Compatibility | 2230, 2242, 2260, 2280 M.2 SSDs |
| Antre Entèfas | M-Kle/B&M-Kle |
| Entèfas Sòti | USB-C |
| Vitès lekti/ekri | SATA 5Gbps / NVMe 10Gbps |
| Mòd enstalasyon | Zouti-gratis |
| Sistèm Sipòte | Windows / Mac OS / Linux |
Figi 3: Paramèt pwodwi detaye.
5. Enstalasyon ak Enstalasyon
Swiv etap sa yo pou enstale SSD M.2 ou a nan bwat la:
- Louvri bwat la: Slide the button cover to the left and gently pull the shell out to open the enclosure.
- Aplike kousen tèmik la: Stick the thermal pad and the thermal fin onto your M.2 SSD. This aids in heat dissipation.
- Mete SSD a: Stick the thermal pad to the SSD and carefully insert the SSD into the enclosure's slot. Ensure it is seated correctly.
- Fèmen patiraj la: Place the shell back and slide the button cover to the right until it clicks into place, securing the SSD.
Figure 4: Tool-free SSD installation steps.
SSD konpatibilite
The enclosure supports both NVMe (M-Key) and SATA (B&M-Key) M.2 SSDs. It is compatible with M.2 SSDs of sizes 2230, 2242, 2260, and 2280.
Figure 5: Dual protocol interface support for M-Key NVMe/PCIe and B&M-Key NGFF/SATA SSDs.
Figure 6: Supported M.2 SSD specifications.
6. Operasyon Enstriksyon
Once the SSD is securely installed in the enclosure:
- Connect the enclosure to your computer using the provided 2-in-1 USB-C cable. Use either the USB-A to USB-C or USB-C to USB-C connection depending on your computer's ports.
- The enclosure will be recognized as an external storage device by your operating system (Windows, Mac OS, Linux).
- For new, unused SSDs, you may need to initialize and partition the drive through your operating system's disk management utility before it can be recognized and used.
- Ou kapab kounye a transfere files pou ale ak pou soti nan SSD la.
Data Transfer Speeds
- When using an NVMe SSD, the transmission rate is up to 10Gbps, with read and write speeds reaching approximately 1000MB/s.
- When using an M.2 SATA SSD, the transmission rate is up to 5Gbps, with read and write speeds reaching approximately 450MB/s.
The enclosure supports UASP (USB Attached SCSI Protocol) and TRIM commands for optimized performance and SSD longevity.
Figi 7: Kapasite transfè done gwo vitès.
Figure 8: The versatile 2-in-1 data cable.
7. Antretyen
- Netwayaj: Use a soft, dry cloth to clean the exterior of the enclosure. Do not use liquid cleaners.
- Dissipasyon chalè: The enclosure features a rapid cooling aluminum alloy shell, a combined heat dissipation module, and a silicone thermal pad to maintain stable operating temperatures.
- Depo: Sere bwat la nan yon kote ki fre epi sèk lè w pa itilize li.
Figure 9: Heat dissipation design for stable performance.
NAN. Depanaj
- SSD pa rekonèt: If a new SSD is not recognized, ensure it has been initialized and partitioned in your operating system's disk management utility.
- Vitès transfè ki ba: Verify that your computer's USB port supports USB 3.1 Gen2 (10Gbps) for NVMe SSDs or USB 3.0 (5Gbps) for SATA SSDs. Older USB 2.0 ports will result in significantly slower speeds. Ensure the cable is properly connected.
- Enclosure Heats Up: It is normal for the aluminum case to heat up during use, especially during prolonged data transfers. This is due to the efficient heat dissipation design transferring heat away from the SSD. It does not affect normal operation.
- Pwoblèm Koneksyon: Try using a different USB port or cable to rule out faulty components.
9. Konsèy itilizatè yo
- New SSD Partitioning: Always remember to initialize and partition a brand new SSD before first use, otherwise, it will not appear in your file eksploratè.
- Tanperati Operasyon Nòmal: The enclosure is designed to dissipate heat effectively. It is normal for the aluminum casing to become warm to the touch during operation, especially under heavy load. This indicates the cooling system is working as intended.
- Gwo konpatibilite: This enclosure is compatible with various brands of NVMe and SATA M.2 SSDs, not limited to specific manufacturers.
10. Garanti ak sipò
For warranty information or technical support, please refer to the seller's policies or contact Yottamaster customer service directly. Keep your proof of purchase for any warranty claims.
