1. Entwodiksyon
The Jonsbo TG-240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient cooling for a wide range of Intel and AMD processors. Featuring a 240mm radiator, addressable RGB (ARGB) lighting, and a rotatable pump head logo, it combines high performance with aesthetic customization. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.
2. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl | TG-240 ARGB (Black/White) |
| Kalite pwodwi | Integrated Water Cooling (CPU All In One) |
| Gwosè radyatè | 277mm (L) x 120mm (W) x 27mm (H) |
| Gwosè fanatik | 120mm x 120mm x 25mm |
| Fan Air Volume | 29.22-66.19 CFM (each) |
| Fanatik Portant | Hydraulic Hybrid Bearing |
| Vitès fanatik | 900-1800 RPM (±10%) |
| Entèfas fanatik | 4-PIN PWM |
| Fanatik bri | 22.9-35.4 dB(A) (max) |
| Gwosè ponp | 74mm x 89.2mm x 51.8mm |
| Pouvwa ponp | 3.6W |
| Ponp bri | ＜30 dB(A) |
| Ponp Voltage | 12V DC |
| Vitès ponp | 2500 RPM (± 10%) |
| Pump Lift | 1.5M max |
| Ponp Flow | ≥1300 mL/min |
| Materyèl Plak Fwad | Copper (0.5mm thin copper bottom) |
| Materyèl radyatè | Copper & Aluminum |
| Water Pipe Material | EPDM+IIR high-density |
| Sipò RGB | A-RGB (5V-3pin) |
| Sokèt CPU ki sipòte | Intel: LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, LGA 2011 AMD: AM4, Socket AM5 |
| Thermal Design Power (D-TDP) | 260W (Note: D-TDP is an open environment with a constant temperature of 20°C. Actual performance may vary.) |
| Sètifikasyon | CE, RoHS |
Note: If the standard parameters of the product differ from the real object due to product upgrading or other reasons, please take the real object as the standard.
3. Pake kontni
Tanpri verifye pake a pou asire w ke tout konpozan yo prezan:
- Jonsbo TG-240 Liquid Cooler (Radiator, Pump, and Fans pre-assembled)
- Mounting Brackets for Intel Sockets (LGA 115X/1200/1700/2011)
- Mounting Brackets for AMD Sockets (AM4/AM5)
- Backplate (for compatible sockets)
- Vis ak Distansè pou Monte
- Paste tèmik
- Manyèl Itilizatè (dokiman sa a)
4. Enstalasyon ak Enstalasyon
Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and fan header locations.
4.1. Prepare CPU a ak kat manman an
- Install the appropriate backplate for your CPU socket (if required) on the rear of the motherboard.
- Secure the correct standoffs onto the motherboard's CPU socket mounting holes.
- Aplike yon ti kantite pat tèmik nan sant difizè chalè entegre (IHS) CPU ou a.
4.2. Enstale radyatè a ak fanatik yo
- Mount the radiator to an available fan mounting location in your PC case (e.g., top, front, or rear). Ensure proper airflow direction.
- Secure the fans to the radiator using the provided screws. The fans are designed with a simplified wiring system, connecting to the motherboard with a single cable for easier cable management.
4.3. Install the Pump Head
- Attach the correct mounting brackets for your CPU socket to the pump head.
- Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs.
- Secure the pump head with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
- The pump head features a damping rotation nameplate, allowing you to adjust the Jonsbo logo direction after installation to match your preferred orientation.
4.4. Konekte Câbles
- Connect the pump's 3-pin power cable to an available 3-pin or 4-pin fan header on your motherboard (usually labeled 'AIO_PUMP' or 'CPU_FAN').
- Connect the fan's 4-pin PWM cable to an available 4-pin fan header on your motherboard (e.g., 'CPU_FAN' or 'SYS_FAN').
- For ARGB lighting, connect the 5V-3pin ARGB cable from the pump and fans to a compatible 5V-3pin ARGB header on your motherboard. Ensure you connect to a 5V-3pin header, not a 12V-4pin RGB header, to prevent damage. The 5V ARGB plug features male and female headers, allowing for daisy-chaining with other ARGB devices.
5. Operasyon Enstriksyon
5.1. Power On and Initial Check
After completing the installation, power on your computer. Verify that the pump and fans are spinning, and the ARGB lighting is active. Check your motherboard's BIOS/UEFI or monitoring software to confirm the pump and fan speeds are detected.
5.2. Kontwòl ekleraj ARGB
The Jonsbo TG-240 supports 5V-3pin ARGB synchronization. To control the lighting effects, use your motherboard's dedicated ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync). This allows for customizable lighting effects across more than 16 million colors.
6. Antretyen
Antretyen regilye ede asire lonjevite ak pèfòmans optimal glasyè likid ou a.
- Netwayaj pousyè: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Excessive dust can impede airflow and reduce cooling efficiency.
- Tcheke pou fwit: While the EPDM+IIR high-density water pipes are designed for durability and leak prevention, it's good practice to visually inspect the tubing and connections for any signs of leakage during routine system checks.
- Enspeksyon fanatik: Ensure fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
- Pat tèmik: Reapplying thermal paste is generally not necessary unless you remove the pump head from the CPU. If you do, clean off old paste and apply new thermal paste before reinstallation.
NAN. Depanaj
If you encounter issues with your Jonsbo TG-240 cooler, try the following steps:
- No Power/No Spin:
- Check all power connections to the pump and fans. Ensure they are securely plugged into the correct motherboard headers.
- Verify that the fan headers are enabled in your motherboard's BIOS/UEFI settings.
- Pa gen ekleraj ARGB:
- Ensure the 5V-3pin ARGB cable is correctly connected to a compatible 5V-3pin ARGB header on your motherboard. Do NOT connect to a 12V-4pin RGB header.
- Check your motherboard's ARGB software to ensure lighting effects are enabled and configured correctly.
- If daisy-chaining, ensure all connections are secure.
- Tanperati CPU ki wo:
- Verify that the pump is running (you might feel a slight vibration or hear a faint hum).
- Ensure fans are spinning at appropriate speeds. Check fan curves in BIOS/UEFI or software.
- Confirm the pump head is securely mounted to the CPU and thermal paste was applied correctly.
- Check for any obstructions to airflow through the radiator.
- bri ki pa nòmal:
- Identify if the noise is coming from the fans or the pump.
- Fan noise can sometimes be reduced by adjusting fan speeds in software.
- Pump noise (e.g., gurgling) can sometimes occur if air is trapped in the loop. Gently tilt your PC case in different directions while the system is running to help dislodge air bubbles.
8. Konsèy itilizatè yo
- Jesyon kab: Pran avantage of the simplified fan wiring and the compact design to achieve a clean build. Plan your cable routes before securing components.
- ARGB Customization: Experiment with different lighting effects and colors using your motherboard's software to match your system's theme.
- Optimal Radiator Placement: For best cooling performance, consider mounting the radiator in a position that allows for fresh air intake or efficient exhaust, depending on your case's airflow design.
- Oryantasyon ponp: While the logo is rotatable, ensure the pump is mounted in a way that minimizes air trapping, typically with the tubes exiting from the bottom or side.
9. Garanti ak sipò
Jonsbo products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Jonsbo websit la oubyen kontakte détayan lokal ou a. Kenbe prèv acha ou pou reklamasyon garanti.
