Manyèl Itilizatè YABER pou Demaraj Machin 4000A 26800mAh

1. Entwodiksyon

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Avètisman Sekirite Enpòtan

Tanpri li epi konprann tout enfòmasyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife oswa blesi grav.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Pwoteksyon tanperati ki wo: Anpeche surchof pandan operasyon.
• Pwoteksyon koneksyon ranvèse: Avètisman epi anpeche domaj si kloureampyo konekte mal.
• Plis pase Pwoteksyon Kouran: Pwoteksyon kont twòp kouran.
• Pwoteksyon kont chaj envès: Anpeche kouran an retounen nan demarè a soti nan batri machin nan.
• Pwoteksyon polarite ranvèse: Ensures correct polarity connection.
• Pwoteksyon sou egzeyat: Protects the internal battery from deep discharge.
• Pwoteksyon sou chaj: Prevents overcharging of the internal battery.
• Pwoteksyon Kout Awondisman: Li fèmen otomatikman nan ka ta gen yon kous kout.

Entelijan clamps provide multiple layers of safety.

Visual representation of the smart clamp protection features.

Prekosyon Sekirite Jeneral:

• Pa plonje pwodwi a nan dlo.
• Pa opere pwodwi a nan atmosfè eksplozif, tankou nan prezans likid ki ka pran dife, gaz, oswa pousyè.
• Pa modifye oswa demont pwodwi a.
• Kenbe soti nan atenn timoun yo.
• Use only the provided smart clamps ak kab.

3. Pake kontni

Tanpri tcheke pake a pou atik sa yo:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• Kalite-C USB kab x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Manyèl itilizatè x 1
• Bwat depo x 1

The YABER Jump Starter and its included accessories.

4. Pwodwi Features

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Powerful Jump Starter: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• Bank pouvwa gwo kapasite: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• Sòti 12V/10A DC: Provides power for various 12V accessories.
• Dirije Limyè Ijans: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Operasyon nan tanperati ekstrèm: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Plis paseview of the YABER Jump Starter's multi-functional capabilities.

5. Espesifikasyon

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Enstalasyon ak Premye Chaj

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Operasyon Enstriksyon

7.1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj

Ensure the jump starter is at least 50% charged before attempting to jump start a vehicle.

1. Mete: Ploge cl smart laamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Konekte: Tache wouj (+) clamp to the positive terminal of your vehicle's battery and the black (-) clamp to the negative terminal. The smart clamps will indicate if the connection is correct.
3. Kòmanse: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Retire: Once the car starts, immediately remove the smart clamps from the car battery, then unplug the smart clamp kab ki soti nan demarè a.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Itilizasyon kòm yon Bank Pouvwa

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Demarè a ap kòmanse chaje aparèy ou an otomatikman.
3. Ekspozisyon dijital la pral montre pousantaj batri ki rete atage.

Charging multiple devices simultaneously with the power bank function.

7.3. Sèvi ak limyè ijans LED la

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Detaye view of the LED emergency light modes.

8. Antretyen ak Depo

• Chaje: Recharge the jump starter every 3-6 months, even if not used, to prolong battery life.
• Netwayaj: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
• Depo: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Tanperati: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

NAN. Depanaj

Aparèy pa pral limen:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Tcheke ke klou entelijan anamp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Si klozèt entelijan anamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Aparèy ki pa chaje ak bank pouvwa a:

• Asire w ke demarè a gen ase chaj.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Eseye yon lòt kab USB oswa pò.

10. Konsèy itilizatè yo

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familyarize w ak klozèt entelijan anamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Garanti ak sipò

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official websit la oswa pwen acha ou a.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.

12. Kesyon yo poze souvan (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.