HEGEHE 220V IP67 Waterproof RGB 5050 LED Strip Instruction Manual

1. Entwodiksyon

Thank you for choosing the HEGEHE 220V IP67 Waterproof RGB 5050 LED Strip. This product is designed for versatile lighting applications, offering vibrant RGB colors and robust waterproof protection for both indoor and outdoor use. This manual provides essential information for safe installation, operation, and maintenance of your LED strip.

2. Karakteristik kle

• Nouvo Konsepsyon Amelyorasyon: Features a 'no wires' design for enhanced safety, improved heat dissipation, and increased durability.
• High Power IR Remote Controller: Available with 1000W (IP65 waterproof) or 1500W (IP67 waterproof) controllers, ensuring reliable and safe operation.
• High-Grade Waterproofing: IP67 waterproof rating for the LED strip, making it suitable for various outdoor and wet environments.
• Ekleraj RGB vibran: High-quality, high-brightness SMD 5050 RGB LEDs ideal for diverse project decorations.
• Amelyore klète: The light bar features a unique fox-shaped lens to magnify and increase light output.
• Konsepsyon koupe: The LED strip can be cut at every 1-meter interval to fit specific length requirements.

3. Espesifikasyon

4. Pake kontni

Pake ou a ta dwe genyen atik sa yo:

• 1x 5050 RGB LED Strip (selected length)
• 1x 1000W or 1500W LED Controller with EU Plug (Note: 50m and 100m light strips include 2 controllers)
• 1x 24-key IR Remote Control (battery not included)
• Free fixing clips (18mm, quantity depends on strip length)

5. Enfòmasyon sou Sekirite

• Asire ekipman pou pouvwa a voltage koresponn ak volim espesifye pwodwi atage (AC220-240V) before connecting.
• Do not connect the LED strip to power while it is still coiled. Unroll the strip completely before use to prevent overheating.
• Always disconnect power before performing any installation, cutting, or maintenance.
• Do not expose the controller to water unless it is specifically rated IP67. The 1000W controller is IP65, and the 1500W controller is IP67.
• Kenbe pwodwi a lwen materyèl ki ka pran dife.
• Do not attempt to repair or modify the product yourself. Contact qualified personnel for service.
• Ensure proper ventilation around the LED strip and controller during operation.

6. Enstalasyon ak Enstalasyon

6.1 Debalaj ak enspeksyon

Carefully remove all components from the packaging. Inspect the LED strip, controller, and remote for any signs of damage. If any damage is found, do not proceed with installation and contact support.

6.2 Planifikasyon Enstalasyon an

Determine the desired location for your LED strip. Measure the required length. Remember that the strip can only be cut at designated 1-meter intervals.

6.3 Cutting the LED Strip (if necessary)

If you need to shorten the LED strip, locate the designated cutting marks, which are typically indicated every 1 meter. Use sharp scissors to cut precisely at these marks. Cutting at any other point will damage the strip and may render it inoperable.

6.4 Konekte kontwolè a

The LED strip connects directly to the controller. Ensure the connection is secure and sturdy. The controller then plugs into a standard EU power outlet.

6.5 Mounting the LED Strip

Use the provided fixing clips to secure the LED strip in place. Ensure the surface is clean and dry for optimal adhesion if using adhesive-backed clips (if applicable, not explicitly stated but common). For outdoor installations, ensure clips are robustly fastened to withstand environmental conditions.

7. Operasyon Enstriksyon

Once the LED strip is securely installed and connected to the power supply via the controller, use the 24-key IR remote control to operate it.

7.1 Fonksyon kontwòl Remote

• Pouvwa ON/OFF: Limen oswa etenn bann LED la.
• Dimming: Adjusts the brightness of the lights.
• RGB Buttons (R, G, B): Activates Red, Green, or Blue light.
• White Light (W): Activates White light.
• Similar Colors: Selects various preset colors.
• Flash: Cycles through colors rapidly.
• Strobe: Li flache yon sèl koulè.
• Fennen: Tranzisyon ant koulè yo fèt san pwoblèm.
• Lis: Gradually changes colors.

7.2 Demonstrasyon Videyo

Watch this video for a demonstration of the RGB LED strip's color-changing capabilities:

8. Antretyen

• Netwayaj: Ensure the LED strip is disconnected from power before cleaning. Use a soft, dry cloth to wipe away dust and debris. For stubborn dirt, a slightly damp cloth can be used, but ensure the strip is completely dry before reconnecting power.
• Enspeksyon: Periodically check the LED strip and connections for any signs of wear, damage, or loose connections. Address any issues promptly.
• Depo: Si w ap sere bann LED la pou yon bon bout tan, asire w ke li pwòp, sèk, epi li vlope yon fason ki pa twò sere pou l pa domaje. Sere l nan yon kote ki fre epi sèk.

NAN. Depanaj

• Bann LED la pa limen:
  • Check if the power plug is securely connected to the outlet.
  • Ensure the LED strip is correctly connected to the controller.
  • Verify that the remote control battery is inserted correctly and has power.
  • Confirm the power button on the remote has been pressed.
• Kontwòl remote pa travay:
  • Check and replace the remote control battery (CR2025 or similar, not included).
  • Ensure there are no obstructions between the remote and the controller's IR receiver.
  • Asire w ke ou nan zòn efektif kontwòl remote la.
• Only part of the strip lights up:
  • This usually indicates a damaged section. If the strip was cut, ensure it was cut at the designated marks.
  • Inspect for physical damage or kinks in the strip.
• Koulè yo pa kòrèk oswa yo pa konsistan:
  • Ensure the controller is functioning correctly. Try resetting the power.
  • Check for any loose connections between the strip and the controller.

10. Konsèy itilizatè yo

• When installing long strips (e.g., 50m or 100m), remember that these lengths typically come with two controllers to ensure optimal performance and brightness distribution.
• For outdoor use, ensure all connections to the controller are properly sealed and protected from direct exposure to heavy rain or prolonged moisture, especially for the IP65 rated 1000W controller. The IP67 rated 1500W controller offers higher protection.
• Always unroll the entire LED strip before plugging it in to prevent heat buildup and potential damage.

11. Garanti ak sipò

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims, technical support, or any questions regarding the product, please contact the seller or manufacturer directly. Please retain your proof of purchase for warranty validation.