1. Pwodwi souview
The MIUSI Smart Intelligent Spray System is an automated misting and humidification solution designed for various applications, including vivariums, terrariums, green plant care, moss maintenance, and turtle cylinder humidification. It features an integrated water pump and timer, allowing for precise control over spray duration and frequency without the need for a direct faucet connection.
2. Pake kontni
Tanpri verifye ke tout atik sa yo enkli nan pakè ou a:
- 1 x Main Engine (Control Unit with integrated pump)
- 1 x Spray Head (Nozzle)
- 5m x PE Water Pipe
- 1 x English/Chinese Version Instruction Manual
- 1 x Pipe Cutter
- 1 x Self-Suction Head (Filter)
- 1 x Konektè T
- 1 x Connector koud
- 5 x R Clips (for securing pipes)
- 2 x Plugs (for sealing unused pipe ends)
- 5 x lyen kab
3. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Travay Voltage | 5V |
| Pouvwa | ≤ 5W |
| Number of Nozzles (Kit) | 1 spray head included, system supports multiple spray points using connectors. (Technical parameters suggest typical setup with 2 nozzles) |
| Product Size (Main Engine) | 80mm x 100mm x 35mm |
| Gwosè pake | 205mm x 215mm x 75mm |
| Pipeline Length | 5m |
| Mòd distribisyon | Cycle Timing (Loop Timing) |
| Timing Accuracy (Spray Duration) | Adjustable from 5 seconds to 60 seconds (in 5-second increments) |
| Timing Accuracy (Stop Duration) | Adjustable from 1 hour to 24 hours (in 1-hour increments) |
| Materyèl | Plastik |
| Kalite | Watering Kits |
4. Enstriksyon Enstalasyon
Follow these steps to set up your Intelligent Spray System:
- Prepare the Pipeline: Use the provided pipe cutter to cut the 5m PE water pipe into desired lengths for your setup. Plan where you want your spray points to be.
- Assemble Nozzles and Connectors: Install the spray head(s), tee connectors, and elbow connectors onto the cut pipeline sections. Ensure a snug fit. If you have unused pipe ends, seal them with the provided plugs.
- Connect Water Outlet: Connect one end of your assembled pipeline (the output side) to the water outlet port on the main engine.
- Install Self-Suction Head: Attach the self-suction head (filter) to one end of a separate piece of pipeline. This will be your water inlet.
- Connect Water Inlet: Connect the other end of the water inlet pipeline (with the self-suction head) to the water inlet port on the main engine.
- Position Water Source: Place the self-suction head into a clean water reservoir (e.g., a water bottle or bucket). Ensure the filter is fully submerged.
- Secure Pipeline: Use the R clips and cable ties to secure the pipeline and nozzles in your terrarium, vivarium, or plant area.
- Pouvwa sou: Plug the power adapter into a suitable electrical outlet and connect it to the main engine. The display will light up.
5. Operasyon Enstriksyon
The main engine features a digital display and three control buttons for setting the spray duration, mode, and stop duration.
- Setting Spray Duration:
Press the 'Spray Duration' button (leftmost icon). Each press will increase the spray time by 5 seconds. The duration can be set from 5 seconds up to a maximum of 60 seconds. - Chwazi mòd:
Press the 'Mode' button (middle power icon). There are three modes available, allowing you to choose the desired operational pattern. Refer to the full instruction manual for details on each mode. - Setting Stop Duration (Interval):
Press the 'Stop Duration' button (rightmost icon). Each press will add 1 hour to the interval between sprays. The stop duration can be set from 1 hour up to a maximum of 24 hours. - Initiating Spray:
Once the desired spray duration, mode, and stop duration are set, the system will automatically begin its cycle.
6. Antretyen
Regular maintenance ensures optimal performance and longevity of your spray system:
- Rezèv dlo: Regularly check and refill the water reservoir. Ensure the water is clean and free of debris to prevent clogging.
- Self-Suction Head (Filter): Periodically clean the filter on the self-suction head to remove any accumulated particles. This prevents blockages and maintains pump efficiency.
- Bouch: If spray becomes weak or uneven, check the nozzles for mineral buildup or blockages. You can gently clean them with a soft brush or soak them in a descaling solution if necessary.
- Tiyo: Inspect the PE water pipe for any kinks, cracks, or leaks. Ensure all connections are secure.
- Main Engine: Keep the main engine unit clean and dry. Avoid exposing it to excessive moisture or direct sunlight.
NAN. Depanaj
If you encounter issues with your spray system, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| No spray or very weak spray | Nivo dlo ki ba nan rezèvwa a Clogged self-suction head/filter Kinked or blocked pipeline Clogged nozzle(s) Pwoblèm pouvwa | Ranpli rezèvwa dlo a Clean the self-suction head filter Check pipeline for obstructions or damage Netwaye oswa ranplase bouch yo Asire w ke adaptè pouvwa a byen konekte |
| Sistèm pa limen | Pa gen ekipman pou pouvwa Adaptè pouvwa defo | Tcheke koneksyon kouran ak priz Try a different compatible 5V power adapter |
| Paramèt revèy pa travay | Anviwònman ki pa kòrèk Erè sistèm | Review and re-enter desired spray and stop durations Unplug and replug the power to reset the system |
| Dlo flit | Koneksyon ki lach Damaged pipeline/connectors | Sere tout koneksyon tiyo yo Inspect and replace any damaged components |
8. Konsèy itilizatè yo
- This intelligent spray system is versatile and can be effectively used for reptiles, electronic setups requiring humidity control, and various terrarium environments.
- While the kit includes one spray head, the modular design with tee and elbow connectors allows for customization and expansion to create multiple spray points within your setup.
- Consider using distilled or purified water to minimize mineral buildup in nozzles and prolong the life of your system.
9. Garanti ak sipò
Pou enfòmasyon sou garanti a, sipò teknik, oswa pyès ranplasman, tanpri kontakte vandè a oswa manifakti a dirèkteman. Kenbe resi acha ou kòm prèv acha.
