1. Entwodiksyon
The ANERN AN-MSC-60A MPPT Solar Charge Controller is an advanced multi-level Maximum Power Point Tracking (MPPT) photovoltaic battery charge controller. Designed for optimal energy harvesting, it significantly improves charging efficiency compared to traditional PWM controllers, increasing the output power of your solar panel system by 5%-30%. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar charge controller.
2. Spécifications pwodwi
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl | AN-MSC-60A |
| Rated chaj aktyèl | 60A |
| Max Open Voltage nan Panèl Solè | 150V |
| Rated Voltage (Oto) | 12V/24V/36V/48V |
| Maksimòm Pouvwa Antre (Sistèm 12V) | 780W |
| Maksimòm Pouvwa Antre (Sistèm 24V) | 1560W |
| Maksimòm Pouvwa Antre (Sistèm 36V) | 2360W |
| Maksimòm Pouvwa Antre (Sistèm 48V) | 3120W |
| Rated Egzeyat aktyèl | 30A |
| Pèt estatik | ≤50mA |
| HVD (Vòl Segondè)tage Dekonekte) | Batri plon-asid 16V |
| Kontwòl limyè Voltage | 5V/10V |
| Travay imidite | ≤90%, Pa gen kondansasyon |
| Klas pwoteksyon | IP30 |
| Kalite ki konekte a tè | Pozitivman Anrasinen |
| Ouvèti pou Enstalasyon | Φ5mm |
| Koefisyan Konpansasyon Tanperati | -4mV/℃/2V (25℃) |
| Volim Bouk Egzeyattage Drop | ≤0.2V |
| Ranje Tanperati LCD | -20℃ ~ +70℃ |
| Ranje Tanperati Operasyon | -20℃ ~ +55℃ |
| Ranje Tanperati Depo | -30℃ ~ +80℃ |
| Kalite batri sipòte | Itilizatè pa defo, sele, inonde, JEL, LiFePo4, Li(NiCoMn)O2 |
| Equalized Chargement Voltage | Maintenance-free lead-acid: 14.6V (2h); Flooded: 14.8V (2h); GEL: No |
| Absòbsyon chaje Voltage | Maintenance-free lead-acid: 14.4V (2h); Flooded: 14.6V (2h); GEL: No |
| LVR (Ba Voltage Rekonekte) | Lead-acid (Maintenance-free, GEL, Flooded): 12.6V |
| LVD (Ba Voltage Dekonekte) | Lead-acid (Maintenance-free, GEL, Flooded): 10.8V |
3. Enstalasyon ak Enstalasyon
3.1 Enstalasyon Fizik
The controller features a die-cast aluminum structure for efficient heat dissipation, ensuring continuous and stable charging. Mount the controller in a well-ventilated area, away from direct sunlight and moisture. Ensure there is sufficient space around the unit for air circulation.
3.2 Dyagram fil elektrik
Follow the wiring diagram carefully to ensure correct and safe connection of your solar system components. Incorrect wiring can damage the controller or other components.
Figure 1: Wiring Diagram for the ANERN AN-MSC-60A MPPT Solar Charge Controller.
3.3 Lòd Koneksyon
- Connect the battery to the charge controller first. Ensure correct polarity.
- Connect the solar panel (PV array) to the charge controller. Ensure correct polarity.
- Connect the load to the charge controller. Ensure correct polarity.
Always disconnect in the reverse order: Load -> Solar Panel -> Battery.
4. Operasyon Enstriksyon
4.1 Deskripsyon entèfas
The controller features an intuitive display and buttons for easy operation. Refer to the image below for an overview of the interface and button functions.
Figure 2: Controller Interface and Button Functions.
| Atik | Icône | Estati |
|---|---|---|
| etalaj PV | ☀️ / 🌙 | Jou / lannwit |
| Chaje | ➡️ MPPT ➡️ | Estati chaje |
| Batri | 🔋 | Pa chaje / Kapasite batri |
| Kalite batri | LiPo / Life | Chwazi kalite batri |
| Chaj | 💡 | Chaje sou / Chaje sou |
| Bouton MENI | ◀️ | Peze yon ti kras pou desann, peze epi kenbe pandan 3 segonn pou antre nan pwochen koòdone nan. |
| Bouton SET | ▶️ | Peze yon ti kras pou chanje, peze epi kenbe pandan 3 segonn pou sòti san sove. |
4.2 Mòd Operasyon Chaj
The controller offers four distinct load operating modes. The default setting is continuous load operation (24 hours). You can select the appropriate mode based on your application needs.
Figure 3: Four Load Operating Modes.
- LD1 (Mòd Regilye): Chaj la fonksyone nòmalman epi ou ka limen oswa etenn li manyèlman.
- LD2 (Mòd Kontwòl Limyè): Chaj la limen otomatikman nan lè solèy kouche epi li etenn nan lè solèy leve.
- LD3 (Mòd Kontwòl Limyè ak Tan): The load turns on at dusk and operates for a set number of hours, then turns off. It automatically identifies dark and light conditions based on the local environment.
- LD4 (Mòd Kontwòl Limyè Ranvèse): Chaj la limen otomatikman nan douvanjou epi li etenn nan lè solèy kouche.
4.3 Anviwònman Kalite Batri
The controller supports various battery types including User default, Sealed, Flooded, GEL, LiFePo4, and Li(NiCoMn)O2. Ensure the correct battery type is selected in the controller settings to optimize charging and prevent damage to your battery. Refer to the specifications table for specific voltage paramèt pou chak kalite batri.
5. Fonksyon Pwoteksyon
The ANERN AN-MSC-60A controller is equipped with multiple protection features to ensure the safety and longevity of your solar system.
Figure 4: Protection Functions.
- Panèl Solè Ranvèse: Protection against reverse connection of the solar panel if the battery is not connected.
- Batri Ranvèse: Protection against reverse connection of the battery if the PV is unconnected.
- Batri sou-Voltage: Prevents battery damage when voltage rive nan sou-voltage pwen.
- Twòp dechaj batri: Prevents battery damage when voltage gout anba a anba-voltage pwen.
- Twòp chaj: Pwoteje sistèm nan si kouran chaj la depase kouran nominal la.
6. Antretyen
Regular maintenance helps ensure the optimal performance and longevity of your solar charge controller.
- Lapwòpte: Kenbe kontwolè a pwòp epi san pousyè ak debri. Sèvi ak yon twal sèk pou netwaye.
- Koneksyon: Tcheke tout koneksyon fil elektrik yo regilyèman pou wè si yo sere epi si yo pa kowoze. Koneksyon ki lach ka lakòz pèt kouran oswa surchof.
- Vantilasyon: Ensure the installation area remains well-ventilated to facilitate proper heat dissipation from the controller's aluminum back cover.
- Tcheke anviwònman an: Verify that the operating environment is within the specified temperature and humidity ranges.
NAN. Depanaj
Si ou rankontre pwoblèm ak kontwolè chaj solè ou a, gade pwoblèm ak solisyon komen sa yo:
- Controller Not Functioning / No Display:
- Check battery connections: Ensure the battery is properly connected and has sufficient voltage. The controller requires battery power to operate.
- Verify wiring: Double-check all wiring according to the diagram, paying close attention to polarity.
- Inspect fuses/breakers: Ensure any inline fuses or circuit breakers in the system are not tripped or blown.
- Pa gen chaj nan panno solè:
- Check solar panel connections: Ensure PV array is correctly connected to the controller with proper polarity.
- Verify solar panel output: Measure the voltage and current of your solar panels to ensure they are producing power.
- Sunlight conditions: Ensure adequate sunlight is reaching the solar panels.
- Chaj la pa fonksyone:
- Check load connections: Ensure the load is correctly wired to the controller.
- Verify load mode: Confirm the selected load operating mode (e.g., LD1, LD2) is appropriate for your needs.
- Batri voltage: Si batri a voltage is too low (below LVD), the controller will disconnect the load to protect the battery.
- Overload protection: If the load current exceeds the controller's rated discharge current, the overload protection may activate. Reduce the load.
8. Konsèy itilizatè yo
- Always connect the battery first and disconnect it last to prevent damage to the controller.
- Ensure your battery type is correctly configured in the controller settings for optimal charging and battery lifespan.
- If the controller appears non-functional, always start by checking all cable connections and the battery's state of charge.
9. Garanti ak sipò
Pou enfòmasyon sou garanti, sipò teknik, oswa kesyon sou sèvis, tanpri kontakte pwen acha orijinal ou a oswa manifakti a dirèkteman. Kenbe resi acha ou kòm prèv acha.
10. Pwodwi souview Videyo
Gade videyo sa a pou yon vizyon anplisview of the ANERN MPPT Solar Charge Controller.
Videyo: Pwodui ANERN MPPT Solè Envèstisè Finiview.
