1. Entwodiksyon
This manual provides detailed instructions and information for various replacement parts compatible with the FMS 1100mm P-51 Dago Red V2 RC airplane. It covers the identification, assembly, operation, and maintenance of these components. Please ensure you have the correct parts for your model, as compatibility with other FMS P-51 variants (e.g., Strega or Voodoo) is not guaranteed.
Note: These parts are specifically for the FMS 1100mm P-51 Dago Red V2 and are not compatible with Strega or Voodoo models.
2. Lis Pati
Below is a comprehensive list of available replacement parts for your FMS 1100mm P-51 Dago Red V2, along with their descriptions and corresponding images. If you require a part not listed, please contact your supplier.
-
Propeller
A 4-blade propeller, typically white, designed for optimal thrust and performance on the P-51 Dago Red V2.
Figure 2.2: Propeller (White). -
Spinner
A light yellow spinner assembly, including the cone and backplate, to streamline airflow over the propeller hub.
Figure 2.3: Spinner (Light Yellow). -
Arbr motè
A yellow motor shaft component, essential for connecting the motor to the propeller assembly.
Figure 2.4: Motor Shaft (Yellow). -
Mòn motè
A green motor mount board, used to securely attach the motor to the airframe.
Figure 2.5: Motor Mount (Green). -
Motor Komisyon Konsèy la
A blue motor board, providing a stable platform for motor installation.
Figure 2.6: Motor Board (Blue). -
Main Gear System
A purple main gear system, including the retract mechanism and associated components for the main landing gear.
Figure 2.7: Main Gear System (Purple). -
Set Kovèti pou prensipal
A light grey main gear set, comprising the wheels and struts for the primary landing gear.
Figure 2.8: Main Gear Set (Light Grey). -
Main Retract
A burgundy main retract unit, responsible for the retraction and extension of the main landing gear.
Figure 2.9: Main Retract (Burgundy). -
9g Plastic Digital Servo
A fluorescent green 9g plastic digital servo, featuring a 460mm cable length, used for precise control of flight surfaces or landing gear.
Figure 2.10: 9g Plastic Digital Servo (FMS9GDP) with 460mm Cable Length. -
80A ESC (4.0mm)
A colorful Predator 80A Brushless Controller, compatible with 4-8S NiMh or 2-6S LiPo batteries, featuring a 5A BEC. Essential for motor speed control.
Figure 2.11: 80A ESC (4.0mm) - Predator Brushless Controller. -
3948 KV900 Motor
A maroon 3948 KV900 motor, providing the necessary power for flight.
Figure 2.12: 3948 KV900 Motor (Maroon). -
Canopy Set
A black canopy set, including the cockpit and associated clear parts.
Figure 2.13: Canopy Set (Black). -
Vortex Generator
A lavender vortex generator, designed to improve aerodynamic performance.
Figure 2.14: Vortex Generator (Lavender). -
Air Speed Head
An orange air speed head, a crucial component for flight instrumentation.
Figure 2.15: Air Speed Head (Orange). -
Fèy Decal
A brown decal sheet, containing various markings and graphics for authentic detailing of the P-51 Dago Red V2.
Figure 2.16: Decal Sheet (Brown). -
Tire Set
A chocolate-colored tire set, including main and tail wheel tires for the landing gear.
Figure 2.17: Tire Set (Chocolate). -
Kontwòl kòn
Camel-colored control horns, used to connect servos to control surfaces like ailerons, elevators, and rudder.
Figure 2.18: Control Horns (Camel). -
Multi-konektè seri
An army green multi-connector set, simplifying wiring connections within the aircraft.
Figure 2.19: Multi-connector set (Army Green). -
Tiyo echapman
Yon champagne-colored exhaust pipe replica, adding scale detail to the model.
Figure 2.20: Exhaust Pipe (Champagne). -
Vise Mete
A dark khaki screw set, containing various fasteners for assembly and maintenance.
Figure 2.21: Screw Set (Dark Khaki).
3. Enstalasyon ak Asanble
When replacing or installing new parts, always refer to the original FMS 1100mm P-51 Dago Red V2 aircraft manual for specific assembly steps and diagrams. The following are general guidelines:
- Preparasyon: Ensure your workspace is clean and organized. Have all necessary tools readily available.
- Demonte: Carefully remove the damaged or old component. Take photos or make notes of wiring and connection points if applicable (e.g., for ESC, motor, servos).
- Enstalasyon: Install the new part, ensuring all screws are tightened appropriately and connections are secure. For electronic components like the ESC or servo, ensure correct polarity and signal wire connections.
- Motor/ESC: When replacing the motor or ESC, ensure the motor wires are connected correctly to the ESC. Incorrect wiring can cause damage. The Predator 80A ESC supports 4-8S NiMh or 2-6S LiPo batteries.
- Servo: The 9g Plastic Digital Servo (FMS9GDP) has a 460mm cable length. Ensure it is routed correctly and connected to the appropriate channel on your receiver.
- Kovèti pou Landing: When installing main gear systems or retracts, ensure they operate smoothly and are properly aligned. Test retraction and extension before flight.
- Propeller/Spinner: Balance the propeller before installation. Securely attach the propeller and spinner to the motor shaft.
- Afich yo: Apply decals to a clean, dry surface for best adhesion.
4. Operating Instructions (General)
These parts are components of an RC aircraft. Proper operation of the aircraft requires adherence to safety guidelines and understanding of RC flight principles. Always perform pre-flight checks before each use.
- Tcheke anvan vòl: Verify all control surfaces move freely and in the correct direction. Check battery levels, secure all connections, and ensure no loose parts.
- Motor/ESC Function: Test the motor and ESC for smooth operation. Listen for unusual noises and check for excessive heat.
- Landing Gear Function: Confirm that the landing gear retracts and extends reliably.
- Servo Function: Ensure all servos respond accurately to transmitter inputs and have full range of motion.
5. Antretyen
Regular maintenance ensures the longevity and reliable performance of your RC airplane parts.
- Enspeksyon: Periodically inspect all parts for wear, damage, or loose connections. Pay close attention to moving parts like landing gear and control linkages.
- Netwayaj: Keep parts clean from dirt, dust, and debris. Use a soft cloth; avoid harsh chemicals.
- Lubrifikasyon: Apply appropriate lubricants to moving mechanical parts (e.g., retract mechanisms) as needed, following the original aircraft manual's recommendations.
- Depo: Store parts in a dry, cool place away from direct sunlight and extreme temperatures.
NAN. Depanaj
This section addresses common issues you might encounter with your FMS 1100mm P-51 Dago Red V2 replacement parts.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Motor not spinning / ESC not responding | Incorrect wiring, faulty ESC/motor, low battery, loose connections. | Check all wiring connections (motor to ESC, ESC to battery, ESC to receiver). Ensure battery is charged. Test components individually if possible. |
| Landing gear not retracting/extending | Faulty retract servo/mechanism, obstruction, incorrect wiring to receiver. | Inspect for physical obstructions. Check servo connections and ensure the servo is functioning. Verify correct channel assignment on the receiver. |
| Control surface not moving / erratic movement | Faulty servo, loose linkage, incorrect servo connection, damaged control horn. | Check servo connections and linkages. Replace damaged control horns. Test servo functionality. |
| Propeller vibration | Unbalanced propeller, loose propeller, bent motor shaft. | Balance the propeller. Ensure propeller is securely tightened. Inspect motor shaft for damage. |
7. Espesifikasyon
| Atribi | Valè |
|---|---|
| Non mak | YOUKOOL (Distributor), FMS (Manufacturer) |
| Nimewo Modèl | FMS 1100mm P-51 Dago Red V2 |
| Pou Kalite Veyikil | Avyon |
| Founiti Zouti | Assembled class |
| Pyès ak Akseswa RC | Parts for 1100mm P-51 Dago Red V2 |
| Materyèl | Materyèl konpoze |
| Èske elektrik | No Battery (refers to the individual parts not containing a battery) |
| Èske se yon pil/alimantasyon kouran? | N (No, for individual parts) |
| Pwodui chimik ki gen anpil enkyetid | Okenn |
| Laj Rekòmande | 14+ an |
| Sèvi ak | Machin ak Jwèt Kontwòl Remote |
| Gwosè | Check details (refer to specific part dimensions if available) |
8. Konsèy itilizatè yo
- Always double-check all connections, especially electrical ones, before powering up your aircraft.
- Use thread-locking compound on metal-to-metal screws that are subject to vibration, such as motor mounts.
- Keep spare screws and small parts organized to prevent loss during maintenance.
- If a part feels stiff or binds during installation, do not force it. Re-examine the assembly steps and check for any misalignment or obstructions.
9. Garanti ak sipò
For any questions regarding the installation, operation, or troubleshooting of these FMS 1100mm P-51 Dago Red V2 replacement parts, please contact the seller or manufacturer directly. Provide your product details and a clear description of the issue for efficient support.
