Manyèl Itilizatè Kontwolè Tanperati Dijital KT3200 pou Tèmosta ak Priz Minutè

1. Entwodiksyon

The KETOTEK KT3200 is a versatile digital temperature controller integrated into a socket timer. It displays the measured temperature and allows users to set start and stop temperatures to control heating or cooling equipment. This device also features a time function for independent day and night temperature control. It is widely applicable in intelligent control systems for heating, refrigeration, brewing, reptile habitats, aquaculture, greenhouses, and general home use.

2. Avètisman Sekirite

Please read these safety warnings carefully before operating the device.

• Before using this unit, inspect the plastic casing for any damage. Do not use the device if it appears damaged.
• The relay has a maximum capacity of 16A. For resistive loads, use less than 14A. For inductive loads, use less than 2A.
• Do not use this unit in environments with explosive gases, excessive steam, or high dust concentrations.
• Pa kite timoun yo opere aparèy la.
• Pa eseye demonte aparèy la tèt ou.

3. Pwodwi souview ak dimansyon

3.1. Konpozan aparèy

• M bouton: Chanje mòd travay
• + Bouton: Ogmante valè
• OK bouton: Select / C°/F° key (Press for 3s to switch C/F)
• - Bouton: Diminye kle
• Back / Reset Key: Peze pou 3s pou reset
• Output Work Indicator: Light indicating output status.

3.2. Dimansyon

• Lajè: 5.8 cm
• Wotè: 11.8 cm
• Pwofondè: 3.2 cm
• Dimansyon Capteur: 2.4 cm (length) x 0.5 cm (diameter)
• Longè kab Capteur: 290 santimèt (3 mèt)

3.3. Available Plug Types

• Kalite US

  

• Kalite Inyon Ewopeyen

  

• FR Kalite

  

• AU Type

  

• Kalite Wayòm Ini

  

4. Operasyon Modes

The KT3200 offers three distinct operating modes to suit various temperature control and timing needs.

4.1. M1 TC: Temperature Control Mode

In this mode, the device controls heating or cooling based on a set start and stop temperature.

• Anviwònman: Define a 'start temperature' and a 'stop temperature'.
• Mòd chofaj: Set the start temperature to be lower than the stop temperature. The device will activate the heating equipment when the measured temperature falls below the start temperature and deactivate it when it reaches the stop temperature.
• Mòd refwadisman: Set the start temperature to be higher than the stop temperature. The device will activate the cooling equipment when the measured temperature rises above the start temperature and deactivate it when it falls to the stop temperature.

4.2. M2 TC+Timer: Day/Night Temperature Control

This mode allows for different temperature control settings during daytime and nighttime periods within a 24-hour cycle.

• Anviwònman: Set the current clock, Time 1 (start of day period), Time 2 (start of night period), TC 1 (temperature control settings for day), and TC 2 (temperature control settings for night).
• Operasyon: During the daytime period (from Time 1 to Time 2), the device will operate according to the TC 1 program. During the nighttime period (from Time 2 to Time 1), it will switch to the TC 2 program.

4.3. M3 Timer: 2 Timer Period Timer Only

This mode functions purely as a timer, controlling the output based on two set time periods.

• Anviwònman: Set the current clock, Time 1 (ON start time), and Time 2 (OFF start time).
• Operasyon: The output will be ON during the period from Time 1 to Time 2. The output will be OFF during the period from Time 2 to Time 1.

5. Espesifikasyon

6. Antretyen

To ensure the longevity and accurate performance of your KT3200 thermostat, follow these simple maintenance guidelines:

• Netwayaj: Gently wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing ak konpozan elektwonik.
• Swen Capteur: Keep the temperature sensor clean and free from debris. Ensure it is not exposed to extreme physical stress or sharp objects that could damage the cable or probe.
• Depo: Lè w pa itilize aparèy la pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.

NAN. Depanaj

If you encounter issues with your KT3200 thermostat, consider the following troubleshooting steps:

• Aparèy pa limen: Ensure the device is securely plugged into a functional power outlet. Check the power supply voltage to ensure it is within the specified range (100~250VAC).
• Lekti tanperati ki pa kòrèk: Verify that the temperature sensor is properly connected and positioned in the area where temperature needs to be measured. Ensure the sensor is not damaged. You may use the temperature calibration function if you suspect a consistent offset.
• Output Not Activating/Deactivating: Check your set start and stop temperatures or timer settings (Time 1, Time 2) to ensure they are configured correctly for your desired operation. Confirm that the connected appliance is working correctly.
• Aparèy pa reponn: Try performing a reset by pressing the 'Back / Reset' key for 3 seconds. This will revert settings to default, so reconfigure as needed.
• Pwoblèm Fonksyon memwa: Remember that only the clock needs to be reset after a power failure if the device was in M2 or M3 mode. All other data is saved.

Si pwoblèm yo pèsiste apre ou fin eseye etap sa yo, tanpri kontakte sèvis kliyan.

8. Konsèy itilizatè yo

• Pouvwa Outage Rekiperasyon: The KT3200 features a memory function that saves all settings except the clock after a power failure. If operating in M2 (Temperature Control + Timer) or M3 (Timer Only) mode, remember to reset the clock upon power restoration. If in M1 (Temperature Control) mode, the device will automatically resume operation.
• Chanje Inite Tanperati: Easily switch between Celsius (℃) and Fahrenheit (℉) by pressing the 'OK' button for 3 seconds.
• Versatile aplikasyon: This thermostat is highly versatile and can be used for various applications such as controlling heaters in a room, maintaining optimal temperatures in incubators, regulating aquarium temperatures, or managing climate in greenhouses.

9. Garanti ak sipò

The KT3200 Timer Socket Thermostat comes with a 6-month warranty from the date of purchase.

For any inquiries or support needs, please contact our customer service. All emails will be answered within 1 business day. We are committed to providing assistance and resolving any issues you may encounter with your product.