bmani H2 Bluetooth Over-Ear Headsets with Active Noise Cancellation

Entwodiksyon

Thank you for choosing the bmani H2 Bluetooth Over-Ear Headsets. These headphones are designed to provide a superior audio experience with active noise cancellation, low-latency Bluetooth 6.0 connectivity, and comfortable over-ear design. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Ki sa ki nan bwat la

Tanpri verifye sa ki nan pakè w la. Si gen nenpòt atik ki manke oswa ki domaje, kontakte sèvis kliyan.

• bmani H2 ANC Headphones
• 3.5mm AUX Audio Kab
• USB-C Chaje Kab
• Manyèl itilizatè

Pwodwi souview

Familiarize yourself with the various components and controls of your bmani H2 headphones.

• Bouton pouvwa: Peze epi kenbe pou pouvwa sou / koupe.
• Volim Up / Next Track: Peze yon ti kras pou ogmante volim, peze lontan pou pwochen mizik la.
• Volim Dawonn / Previous Track: Peze yon ti kras pou bese volim nan, peze lontan pou ale nan mizik anvan an.
• Bouton milti-fonksyon (MFB): Play/Pause, Answer/End calls.
• Bouton ANC: Aktive/dezaktive Anilasyon Bri Aktif la.
• USB-C pò: Pou chaje kas ekoutè yo.
• 3.5mm Audio Jack: Pou koneksyon filaire.
• Ekspozisyon batri: Montre aktyèl pousantaj batritage.

Enstalasyon

Chaje kas ekoutè yo

Before first use, fully charge your bmani H2 headphones. Connect the supplied USB-C cable to the charging port on the headphones and the other end to a USB power source (e.g., wall adapter, computer USB port). The battery display will show the charging progress. A 10-minute charge provides approximately 3 hours of playtime.

Power On/Off

• Pou limen: Press and hold the Power button for 3 seconds until the indicator light turns on and you hear a power-on prompt.
• Pou etenn: Press and hold the Power button for 3 seconds until the indicator light turns off and you hear a power-off prompt.

Pè Bluetooth

1. Asire w ke kas ekoutè yo etenn.
2. Peze epi kenbe bouton Power la pandan 5 segonn jiskaske limyè endikatè a flache ble ak wouj altènativman, sa ki endike mòd koneksyon.
3. Sou aparèy ou an (telefòn entelijan, tablèt, òdinatè), aktive Bluetooth epi chèche aparèy ki disponib yo.
4. Chwazi "H2" nan lis aparèy yo.
5. Once connected, the indicator light will flash blue slowly, and you will hear a confirmation tone.

Koneksyon Filaire (Mòd AUX)

You can use the bmani H2 headphones with the included 3.5mm AUX audio cable for a wired connection, even when the battery is low or if Bluetooth is not available.

1. Connect one end of the 3.5mm AUX cable to the audio jack on the headphones.
2. Konekte lòt bout la nan sòti odyo 3.5mm aparèy ou an.
3. Kas ekoutè yo ap chanje otomatikman nan mòd filaire.

Operasyon

Kontwòl debaz yo

Anilasyon bri aktif (ANC)

The bmani H2 headphones feature Active Noise Cancellation to reduce ambient noise. Press the dedicated ANC button to toggle the feature on or off. When ANC is active, you will experience a significant reduction in surrounding sounds, allowing for a more immersive audio experience.

Odyo espasyal

The bmani H2 headphones incorporate 360° Spatial Audio, utilizing built-in gyroscopes and accelerometers to track head movement in real-time. This technology adapts the audio output to create an immersive 3D sound field, enhancing your listening experience.

Clear Calls with 6-Mic Array

The headphones feature an enhanced ENC (Environmental Noise Cancellation) chip and a 6-microphone system. This system precisely detects your voice and ambient noise, producing reverse sound waves to reduce interference and deliver consistently clear calls, even in loud environments.

Antretyen

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye kas ekoutè yo. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Depo: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is recommended to store them in their original packaging or a protective case.
• Rezistans dlo: Ekoutè sa yo se Pa reziste dlo. Avoid exposure to water or excessive moisture.
• Swen kab: Handle the charging and audio cables gently. Avoid sharp bends or excessive pulling.

Depanaj

If you encounter issues with your bmani H2 headphones, refer to the following common solutions:

• Kas ekoutè yo pa vle limen: Asire w ke kas ekoutè yo byen chaje.
• Pa ka konekte ak aparèy la:
  1. Ensure the headphones are in pairing mode (indicator light flashing blue and red).
  2. Asire w ke Bluetooth aktive sou aparèy ou an epi li nan zòn nan.
  3. Eseye yon reset difisil: With the headphones powered on, press and hold both the Volume Up and Volume Down buttons simultaneously for about 5-7 seconds until the headphones reset. Then attempt pairing again.
  4. Bliye aparèy la nan paramèt Bluetooth telefòn ou an epi eseye konekte li ankò.
• Pa gen son:
  1. Tcheke nivo volim nan tou de kas ekoutè yo ak aparèy ki konekte a.
  2. Ensure the headphones are properly paired via Bluetooth or the AUX cable is securely connected.
  3. If using AUX, ensure the cable is fully inserted into both the headphone and device jacks.
• Poor sound quality or latency:
  1. Pwoche pi pre aparèy ki konekte a pou diminye entèferans.
  2. Asire w pa gen okenn obstak ant kas ekoutè yo ak aparèy ou an.
  3. Eseye dekonekte epi rekonekte koneksyon Bluetooth la.
  4. If using for gaming, ensure your device supports Bluetooth 6.0 for optimal low latency.
• ANC pa fonksyone byen: Asire w ou peze bouton ANC a pou aktive fonksyon an.
• Battery display stuck at 99%: This is a known characteristic for some units and does not affect battery performance or full charge.

If the issue persists, please contact bmani customer support.

Espesifikasyon

Enfòmasyon sou Sekirite

• Pa demonte oswa modifye kas ekoutè yo.
• Keep away from extreme temperatures, humidity, and liquids.
• Evite koute mizik pandan lontan ak gwo volim pou anpeche domaj nan zòrèy ou.
• Do not use headphones while driving or in situations where you need to hear your surroundings.
• Jete pwodwi a yon fason responsab dapre règleman lokal yo.

Garanti ak sipò

The bmani H2 headphones come with a 5-ane garanti manifakti. For warranty claims, technical support, or any questions not covered in this manual, please contact bmani customer support through the retailer where you purchased the product or visit the official bmani websit.

Videyo pwodwi ofisyèl yo

Watch these official videos for additional information and demonstrations of the bmani H2 headphones.