DUMOS 26-Inch Counter Height Bar Stools (Set of 2) Instruction Manual

Entwodiksyon

This manual provides instructions for the assembly, operation, and maintenance of your DUMOS 26-inch counter height bar stools. Please read these instructions carefully before assembly and use to ensure safe and proper functionality. These bar stools are designed for use at kitchen islands, counters, and similar spaces, offering a comfortable seating solution with a modern aesthetic.

Image: Two DUMOS 26-inch counter height bar stools in a kitchen setting.

Enfòmasyon sou Sekirite

• Kapasite pwa: Do not exceed the maximum weight capacity of 330 pounds (150 kg) per stool. Exceeding this limit may result in damage to the stool or personal injury.
• Estabilite: Always ensure the stool is stable and all connections are secure before sitting. Periodically check and tighten all bolts.
• Asanble: Follow all assembly instructions carefully. Incorrect assembly can lead to instability and potential hazards.
• Pwoteksyon etaj: The stool legs are equipped with non-slip and anti-scratch protectors. Ensure these are intact to prevent floor damage and maintain stability.
• Timoun: Kenbe timoun yo lwen zòn asanblaj la. Ti pyès yo ka poze yon danje toufe.

Kontni pake

Anvan ou kòmanse asanblaj la, verifye ke tout pyès ki nan lis anba a yo prezan epi yo pa domaje. Si gen nenpòt pyès ki manke oswa ki domaje, tanpri kontakte sèvis kliyan.

• Seat Cushion (A) - 2 pieces
• Metal Legs (B & C) - 2 sets (Left and Right for each stool)
• Supporting Round Tube (D) - 2 pieces
• Hardware Pack (Bolts E, G1, G2, and Wrench H) - 1 set

Image: Product details highlighting ergonomic design, durable structure, footrest, and non-slip protectors.

Enstriksyon Enstalasyon ak Asanblaj

Assembly is straightforward and typically takes 10-15 minutes per stool. All necessary hardware and tools are included.

1. Prepare Konpozan yo: Unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify the Seat Cushion (A), Metal Legs (B & C), and Supporting Round Tube (D).
2. Attach Supporting Tube: Align the round holes of the Supporting Round Tube (D) with the screw holes on the Metal Legs (B & C). Insert Bolts (E) and tighten them approximately 50% with the provided Wrench (H). Do not fully tighten yet.
3. Mete kousen chèz la: Align the Metal Legs (B & C) over the pre-drilled holes underneath the Seat Cushion (A). Secure them with Bolts (G2) and the Wrench (H). Then, insert and tighten Bolts (G1) into the remaining screw holes.
4. Sere final la: Once all bolts are in place, gradually tighten all bolts (E, G1, G2) in the order shown in the assembly diagram until they are completely secure. Ensure the stool is stable and does not wobble.

Pou yon gid vizyèl, tanpri gade videyo enstalasyon ofisyèl la:

Enstriksyon Operasyon

These bar stools are designed for seating at counter-height surfaces. To ensure safe operation:

• Syèj: Sit centrally on the seat cushion. Avoid standing on the stool or leaning excessively to one side, which could compromise stability.
• Limit pwa: Pa depase kapasite pwa maksimòm lan ki se 330 liv (150 kg).
• Mouvman: When moving the stool, lift it rather than dragging it to prevent damage to your floor and the stool's non-slip protectors.
• Pye pye: Utilize the integrated footrest for comfort and to reduce body pressure during extended sitting.

Antretyen

Bon swen ap pwolonje lavi ak aparans tabourè ba ou yo.

• Netwayaj: The faux leather upholstery is waterproof and resistant to spills. For routine cleaning, wipe the surface with a soft, damp cloth. For tougher stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals, as these can damage the material.
• Swen ankadreman: Siye ankadreman metal la avèk yon twal sèk oswa yon ti kras mouye.amp twal. Evite ekspozisyon pwolonje nan imidite.
• Tcheke Materyèl: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
• Evite limyè solèy la dirèk: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack over time.

Image: Detail of exquisite stitching and waterproof faux leather for easy cleaning.

Depanaj

Si ou rankontre nenpòt pwoblèm ak tabourè ba ou yo, gade solisyon komen sa yo:

• Poupou a ap tranble: This is usually caused by unevenly tightened bolts. Place the stool on a flat surface and systematically tighten all assembly bolts. Ensure they are all equally snug.
• Reyur sou planche a: Check the non-slip protectors on the bottom of the legs. If they are missing or damaged, contact customer support for replacements. Ensure the floor is clean before moving stools.
• Pati ki lach: If any parts feel loose, immediately stop using the stool and re-tighten all connections as per the assembly instructions.

Espesifikasyon

Image: Detailed dimensions and weight capacity of the bar stool.

Garanti ak sipò

For warranty information, please refer to the documentation included with your purchase or contact the retailer directly. If you have any questions, require replacement parts, or need further assistance, please reach out to DUMOS customer service through your purchase platform or the official DUMOS websit.