LOKLNEYK Universal TV Bracket Instruction Manual

1. Entwodiksyon

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your LOKLNEYK Universal TV Bracket, Model liangwei 90. This low-profile wall mount is designed for most 14-60 inch flat or curved TVs with a maximum VESA compatibility of 200x200mm and a maximum load capacity of 40kg.

Please read this manual thoroughly before installation and retain it for future reference. Ensure all components are present and undamaged before proceeding.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Improper installation may result in serious personal injury or damage to your TV and property. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Pa depase kapasite chaj maksimòm 40kg (88 lbs).
• Asire w ke estrikti miray la ka sipòte pwa ansanm ak televizyon an.
• Always use a stud finder to locate wall studs for secure mounting. If mounting to concrete or brick, use appropriate anchors (not always included).
• Mete ekipman sekirite apwopriye, tankou pwoteksyon pou je, pandan enstalasyon an.
• Kenbe timoun ak bèt kay lwen pandan enstalasyon an.
• Do not overtighten screws, as this may cause damage.
• Pwodwi sa a fèt pou itilize andedan kay la sèlman.

3. Spécifications pwodwi

Note: The product is designed for a low-profile installation, keeping your TV close to the wall.

4. Pake kontni

Please verify that all parts are included before installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Plak miray (1)
• Bra Sipò Televizyon (2)
• Mounting Hardware (Screws, Washers, Spacers, Wall Anchors - specific quantities may vary)
• Bubble Level (1) (Often included for installation)

Figure 1: Mount Dimensions and VESA Compatibility. This image illustrates the overall dimensions of the mount (440mm width, 417mm height) and indicates compatibility for 26-60 inch TVs. While the image shows VESA up to 400x400mm, please adhere to the product specification of Max VESA 200x200mm.

5. Enstalasyon ak Enstalasyon

Follow these steps carefully to install your LOKLNEYK Universal TV Bracket.

5.1 Zouti ki nesesè (pa enkli)

• Kreyon
• Fè egzèsis
• Phillips tèt tournevis
• Stud Finder (for wood stud walls)
• Mezire tep
• Level (a small bubble level is often included)

5.2 Mete Sipò Televizyon yo sou Televizyon an

1. Mete televizyon ou a fas anba sou yon sifas mou epi pwòp pou evite domaje ekran an.
2. Idantifye twou VESA aliye yo sou do a nan televizyon ou.
3. Select the appropriate screws, washers, and spacers from the provided hardware that fit your TV's mounting holes. Ensure the screws are long enough to securely fasten the brackets but not so long that they damage internal components.
4. Attach the two vertical TV bracket arms to the back of your TV using the selected hardware. Ensure the hooks on the bracket arms are facing upwards and the arms are centered and level. Do not overtighten.

5.3 Monte Plak Miray la

1. Determine the desired height for your TV. Mark the center of where you want the TV to be.
2. Hold the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling locations through the holes on the wall plate.
3. Pou miray ak poto an bwa: Use a stud finder to locate the center of two adjacent wood studs. Drill pilot holes at the marked locations. Secure the wall plate to the studs using the provided wood screws and washers.
4. Pou miray beton/brik: Drill pilot holes at the marked locations. Insert the plastic wall anchors into the drilled holes. Secure the wall plate using the provided concrete screws and washers.
5. Verify the wall plate is securely fastened and level before proceeding.

Figure 2: Wall Plate Installation. This image shows the main wall plate securely mounted to a wall, ready for the TV to be attached.

Figure 3: Mount Construction Detail. This image emphasizes the cold-rolled steel material, indicating durability, and shows a built-in bubble level for accurate installation.

5.4 Pandye televizyon an

1. With assistance, carefully lift the TV with the attached bracket arms.
2. Hook the TV bracket arms onto the top edge of the wall plate.
3. Gently lower the TV until the bracket arms fully engage with the wall plate.
4. Secure the TV to the wall plate using the safety screws or locking mechanisms located at the bottom of the TV bracket arms. This prevents accidental dislodging.
5. Check that the TV is level and securely mounted.

6. Operasyon

The LOKLNEYK Universal TV Bracket is a low-profile wall mount designed for a fixed position with a slight tilting capability.

• Pozisyon fiks: Once installed, your TV will be held securely in a fixed position close to the wall, optimizing space.
• Ang baskil: This mount allows for a 0-15° tilting adjustment. To adjust the tilt, loosen the tilt adjustment screws on the side of the TV bracket arms, set the desired angle, and then securely tighten the screws. This feature helps reduce glare and provides a comfortable viewing experience from various positions.

Figi 4: Optimal Viewing Experience. This image demonstrates the TV mounted on the wall, providing an enhanced viewogmante eksperyans epi ekonomize espas.

7. Antretyen

Antretyen regilye asire lonjevite ak sekirite sipò televizyon ou an.

• Netwayaj: Detanzantan, netwaye montur la avèk yon twal mou epi sèk. Evite pwodui netwayaj abrazif oswa solvan.
• Tcheke Koneksyon: Annually, or if you notice any instability, check all screws and bolts to ensure they are securely tightened. Do not overtighten.
• Enspekte pou domaj: Periodically inspect the mount for any signs of wear, corrosion, or damage. If any damage is found, contact customer support for replacement parts or advice.

NAN. Depanaj

Si ou rankontre pwoblèm pandan oswa apre enstalasyon an, gade pwoblèm ak solisyon komen sa yo.

9. Garanti ak sipò

For warranty information or technical support, please refer to the documentation included with your purchase or contact LOKLNEYK customer service directly. Please have your model number (liangwei 90) and purchase details ready when contacting support.

Manufacturer: LOKLNEYK

Date First Available: January 10, 2026