ORICO AP80F

ORICO 10Gbps Magnetic M.2 NVMe SSD Enclosure with USB-C Dock (Model AP80F) User Manual

This manual provides detailed instructions for the setup, operation, and maintenance of your ORICO AP80F Magnetic M.2 NVMe SSD Enclosure.

Pwodwi souview

The ORICO AP80F is a versatile 6-in-1 USB-C magnetic docking station that combines an M.2 NVMe SSD enclosure with multiple expansion ports. It features high-speed data transfer, magnetic attachment, and broad compatibility for various devices.

Karakteristik kle

  • Fonksyonalite 6-an-1: Integrates M.2 NVMe SSD enclosure, dual SD/TF card slots, USB-C 10Gbps data port, USB-C 480Mbps headset/mic port, and PD 100W fast charging.
  • Transfè Done gwo vitès: Up to 10Gbps for the SSD, enabling fast ProRes 4K video recording and file transfè.
  • Atachman mayetik: Built-in magnetic array compatible with MagSafe for secure attachment to iPhones and other devices with magnetic cases/rings.
  • Konpatibilite SSD: Supports full-size NVMe SSDs (2230/2242/2260/2280) up to 4TB. Note: Only compatible with NVMe protocol, not SATA.
  • Lektè kat: Dual SD/TF 3.0 card slots with read speeds up to 104MB/s.
  • Livrezon pouvwa: PD 100W pass-through charging.
  • Pò odyo: USB-C 480Mbps audio combo port for microphones or headphones.
  • Dissipasyon chalè efikas: Alyaj aliminyòm casing and thermal pads prevent thermal throttling.

Kontni pake

Tanpri verifye ke tout atik yo prezan nan pakè ou a:

  • 1× Magnetic M.2 NVMe 2230/2242/2260/2280 SSD Enclosure
  • 1× 0.13m C to C Cable
  • 1× Magnetic Ring
  • 1× Thermal Silicone Pad
  • 1 × tournevis
  • 2 × Vis
  • 1 × Manyèl itilizatè
Package Contents of ORICO AP80F

This image displays the package contents, including the SSD enclosure, USB-C cable, magnetic ring, thermal pad, screwdriver, screws, and user manual.

Enstalasyon

Enstalasyon SSD

  1. Louvri bwat la: Unscrew and remove the bottom cover of the enclosure.
  2. Step 1: Opening the SSD Enclosure

    This image shows the first step of opening the enclosure by unscrewing and removing the bottom cover.

  3. Enstale Disk Di a: Insert your M.2 NVMe SSD at a 30-degree angle into the slot. Tighten the rear screw to secure the drive.
  4. Step 2: Installing the M.2 NVMe SSD

    This image illustrates inserting the M.2 NVMe SSD into the enclosure at an angle and securing it with a screw.

  5. Install Thermal Pad: Place the thermal silicone pad on top of the hard drive.
  6. Step 3: Installing the Thermal Pad

    This image shows placing the thermal pad over the installed SSD for heat dissipation.

  7. Enstalasyon konplè: Close the bottom cover and tighten the screws.
  8. Step 4: Closing the Enclosure

    This image demonstrates closing the enclosure and securing it with screws after SSD and thermal pad installation.

Magnetic Ring Attachment (Optional)

For devices without built-in MagSafe compatibility, use the included magnetic ring for secure attachment.

Magnetic Ring for Enhanced Attachment

This image shows the magnetic ring that can be attached to non-MagSafe compatible devices for secure mounting of the enclosure.

Enstriksyon Operasyon

Konekte ak Aparèy

Connect the ORICO AP80F to your device using the provided USB-C to USB-C cable. The enclosure is compatible with:

  • iPhone 15/16/17 Pro/Max/Plus
  • iPad Pro
  • MacBook
  • Aparèy android
  • Windows/Linux computers
ORICO AP80F connected to various devices

This image displays the ORICO AP80F connected to an iPhone, iPad, laptop, and Android phone, demonstrating its wide compatibility.

Transfè Done

The enclosure supports USB 3.2 Gen 2 with up to 10Gbps transfer speeds.

High-speed data transfer with ORICO AP80F

This image illustrates the high-speed data transfer capability of the ORICO AP80F, showing a laptop connected to the enclosure and a smartphone.

This video demonstrates the ORICO AP80F's support for full-size NVMe SSDs (2230/2242/2260/2280) up to 4TB, highlighting its storage capacity.

ProRes Recording (iPhone)

For compatible iPhone models (iPhone 15/16/17 Pro/Max/Plus), the enclosure enables direct 4K ProRes recording to the installed SSD, conserving internal phone storage.

iPhone ProRes recording with ORICO AP80F

This image shows an iPhone recording 4K ProRes video directly to the ORICO AP80F SSD enclosure.

This video demonstrates the ORICO SSD Enclosure's capability for ProRes recording with iPhone 17/16 Pro models.

This video highlights the ProRes recording feature for 2230/2242/2260/2280 B+M M-Key SSDs using the ORICO enclosure.

Lektè kat SD/TF

Insert SD or TF cards into the dedicated slots for quick photo and video import from cameras or other devices. The card reader supports UHS-I compatible formats (SD, SDHC, SDXC, Micro SD) with read speeds up to 104MB/s.

SD and TF card slots on ORICO AP80F

This image shows the SD and TF card slots on the ORICO AP80F, demonstrating its card reading capabilities.

PD 100W Fast Charging

The USB-C PD port supports up to 100W pass-through charging, allowing you to power your device while using the enclosure.

PD 100W fast charging feature

This image illustrates the PD 100W fast charging capability, showing the enclosure connected to a laptop and a power adapter.

Headset/Mic (USB-C) Port

Use the USB-C 480Mbps audio combo port to connect microphones or monitoring headphones.

Headset/Mic USB-C port on ORICO AP80F

This image highlights the USB-C headset/mic port on the ORICO AP80F, showing it connected to a microphone.

File Jesyon

Pou iPhone (iOS)

  1. Connect the enclosure to your iPhone (15/16/17 Series).
  2. Select the photos/videos you wish to transfer.
  3. Click "Save to Files".
  4. Click "Browse".
  5. Click "ORICO" (or the name of your SSD).
  6. Click "Save".

Note: This feature is not applicable for iPhone 14/13/12/11/XS/XR/X/SE.

iPhone file transfer steps

This image provides a step-by-step visual guide for transferring files from an iPhone to the ORICO AP80F SSD enclosure.

Pou Android Telefòn

  1. Connect the enclosure to your Android phone.
  2. Klike sou "Files".
  3. Click "Images" (or desired file kalite).
  4. Select the photos/videos and click "Copy".
  5. Click "ORICO" (or the name of your SSD).
  6. Click "V" (Paste).
Android file transfer steps

This image provides a step-by-step visual guide for transferring files from an Android phone to the ORICO AP80F SSD enclosure.

Antretyen

Dissipation chalè

The ORICO AP80F features an aluminum alloy casing and includes thermal silicone pads to ensure efficient heat dissipation. This design helps maintain stable performance during prolonged high-load operations and protects data integrity.

Multi-Heat Dissipation features

This image highlights the multi-heat dissipation features of the enclosure, including the thermal pad and aluminum alloy frame.

Swen Jeneral

  • Kenbe aparèy la pwòp epi san pousyè.
  • Evite ekspoze aparèy la nan tanperati ekstrèm oswa imidite.
  • Pa lage oswa soumèt aparèy la a gwo enpak.

Depanaj

Pwoblèm komen ak solisyon yo

  • Aparèy la pa rekonèt:
    • Ensure the USB-C cable is securely connected to both the enclosure and your device.
    • Verifye ke SSD M.2 NVMe a byen enstale epi byen sere nan bwat la.
    • Check if your device's operating system requires specific drivers (usually plug-and-play for modern OS).
    • Try connecting to a different USB-C port or another compatible device to rule out port issues.
  • Vitès transfè ki ba:
    • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps) for optimal performance. Older USB versions will result in lower speeds.
    • Confirm that the SSD installed is an NVMe drive, not a SATA M.2 drive, as the enclosure is only compatible with NVMe.
    • Fèmen lòt aplikasyon ki ta ka ap konsome resous sistèm oswa Pleasant.
  • SSD not detected after installation:
    • Double-check the SSD installation steps, ensuring it's fully seated and secured.
    • For new SSDs, it may need to be initialized and formatted in your computer's Disk Management (Windows) or Disk Utility (macOS) before it appears.
    • Ensure the SSD is an NVMe (M-Key or B+M Key) and not a SATA (B-Key) M.2 SSD.
  • Magnetic attachment not strong enough:
    • Asire w telefòn ou oswa kouvèti ou a konpatib ak MagSafe.
    • If using the included magnetic ring, ensure it is properly adhered to your device or case.
    • Thick phone cases may reduce magnetic strength.
  • PD charging not working or slow:
    • Verify that your power adapter and USB-C cable support PD 100W.
    • Ensure the cable is connected to the correct PD input port on the enclosure.

Espesifikasyon

KarakteristikDetay
MakORICO
Nimewo ModèlAP80F
Entèfas MateryèlUSB Kalite C
Vitès Transfè Done10 Gbps (USB 3.2 Gen 2)
SSD konpatibiliteM.2 NVMe (2230/2242/2260/2280), up to 4TB
Pwotokòl SSDNVMe (M-Key, B+M Key) only
Lektè katSD 3.0, TF 3.0 (UHS-I compatible)
Card Read SpeedJiska 104MB/s
Pò USB-C1x 10Gbps Data, 1x 100W PD Charging, 1x 480Mbps Headset/Mic
Livrezon pouvwaPD 100W (Input), PD 85W (Output)
Aparèy konpatibDesktop, Gaming Console, Laptop, Smartphone (iPhone 15/16/17 Pro/Max/Plus, Android), Tablet
Sistèm konpatib yoMac OS, iOS, Windows, Linux, Android
MateryèlAliminyòm alyaj

Garanti ak sipò

Enfòmasyon sou Garanti

This ORICO product comes with a 12 mwa garanti manifaktiTanpri konsève prèv acha ou a pou reklamasyon garanti a.

Sipò pou Kliyan

For technical assistance, troubleshooting, or warranty inquiries, please contact ORICO customer support through their official websit entènèt la oubyen magazen kote ou te achte pwodwi a.

You can visit the official ORICO store for more information: Magazen Ofisyèl ORICO

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.