ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer User Manual

1. Entwodiksyon

Mèsi pou acha aasing the ThermoPro TP210B Wireless Refrigerator/Freezer Thermometer. This device is designed to help you monitor the temperature of your refrigerator and freezer wirelessly, ensuring your food is stored at optimal temperatures. With a strong 500ft/150m wireless range and customizable alarms, you can easily keep track of temperature fluctuations.

2. Pake kontni

• 1 x inite reseptè
• 1 x inite transmetè
• 2 x AAA Batteries (for Receiver)
• 1 x USB Charging Cable (for Transmitter)
• 1 x manyèl itilizatè

3. Karakteristik kle

• Ranje san fil pwolonje: Up to 500ft/150m using advanced RF technology for stable connection.
• Pre-Paired for Immediate Use: No complex setup required; units are pre-paired from the factory.
• Lajè ranje mezi: Accurate readings within ±0.9°F across -40°F to 158°F (-40°C to 70°C).
• Smart Temperature Alerts: Customizable high/low temperature limits with audio-visual alarms.
• Easy-to-Read Backlit Display: Shows fridge and freezer readings, Max/Min records, and low-battery status.
• Considerate Power Design: Receiver uses AAA batteries, transmitter features a rechargeable lithium battery.
• Opsyon Plasman fleksib: Receiver has hook, stand, or magnet; transmitter has clip or stand.

4. Enstalasyon

4.1. Receiver Battery Installation

1. Louvri konpatiman pil la ki nan dèyè inite reseptè a.
2. Mete 2 pil AAA, asire w polarite ki kòrèk la (+/-).
3. Fèmen lòj batri a byen.

Note: The receiver requires 2 AAA batteries, which are included in the package.

4.2. Transmitter Charging

1. Locate the charging port on the transmitter unit.
2. Connect the provided USB charging cable to the transmitter and a standard USB power source (e.g., wall adapter, computer USB port).
3. Allow the transmitter to charge fully before first use. The charging indicator will change when fully charged.

Note: The transmitter uses a rechargeable lithium battery designed for low-temperature environments.

4.3. Initial Pairing (Pre-Paired)

The ThermoPro TP210B units are pre-paired at the factory. Simply power on both the receiver and transmitter, and they should automatically connect. If connection issues occur, refer to the Troubleshooting section.

4.4. Plasman

Image: ThermoPro TP210B Receiver and Transmitter. The receiver displays temperatures, while the transmitter sends data from inside the appliance.

Plasman reseptè:

• Use the integrated stand to place it on a countertop.
• Utilize the magnetic back to attach it to a metallic surface.
• Hang it using the hook on the back.
• Place the receiver in a location where you can easily view the display and hear alarms, within the 500ft/150m range of the transmitter.

Plasman Transmetè:

• Place the transmitter inside your refrigerator or freezer.
• Use the integrated clip to attach it to a shelf or rack.
• Ensure the transmitter is not obstructed by large items that could block the wireless signal.

5. Operasyon Enstriksyon

5.1. Power On/Off

• Peze a POUVWA button on both the receiver and transmitter to turn them on or off.

5.2. Lekti Tanperati yo

• The receiver's backlit LCD display will show the current temperature from the transmitter.
• The display typically shows both the current temperature and the all-time Max/Min records.

5.3. Setting Temperature Alarms

The TP210B allows you to set custom high and low temperature limits for alerts.

1. Peze a Alèt button on the receiver. The high limit will flash.
2. Sèvi ak la UP or DESANN buttons to adjust the high temperature limit.
3. Peze Alèt again to confirm the high limit and move to the low limit setting.
4. Sèvi ak la UP or DESANN buttons to adjust the low temperature limit.
5. Peze Alèt a third time to confirm the low limit and exit alarm setting mode.

When the temperature exceeds the set range, the receiver will emit an audio-visual alarm.

5.4. Max/Min Temperature Records

• The receiver automatically records the maximum and minimum temperatures detected since the last reset.
• Peze a MAX/MIN button to cycle through current, maximum, and minimum temperature readings.
• To reset the Max/Min records, press and hold the MAX/MIN bouton pou 3 segonn pandan y ap viewing the Max/Min display.

5.5. Ekleraj

• The receiver features a bright backlit display for easy reading in low-light conditions.
• The backlight will activate automatically when a button is pressed and will turn off after a short period of inactivity to conserve battery.

6. Antretyen

6.1. Netwayaj

• Wipe the units with a damp twal. Pa plonje nan dlo.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvang.

6.2. Battery Replacement (Receiver)

• When the low battery indicator appears on the receiver display, replace the 2 AAA batteries.
• Ensure proper polarity when inserting new batteries.

6.3. Transmitter Charging

• Recharge the transmitter's lithium battery when the low battery indicator appears.
• Sèvi ak kab chaje USB yo bay la.

6.4. Depo

• If storing the device for an extended period, remove the AAA batteries from the receiver.
• Sere nan yon kote ki sèk lwen tanperati ekstrèm.

NAN. Depanaj

8. Espesifikasyon

• Ranje Tanperati: -40 ° F a 158 ° F (-40 ° C a 70 ° C)
• Presizyon Tanperati: ± 0.9 ° F (± 0.5 ° C)
• Ranje san fil: Jiska 500 pye (150m) an plen lè
• Frekans transmisyon: 433 MHz
• Pouvwa reseptè: 2 x AAA pil (enkli)
• Pouvwa transmetè: Rechargeable Lithium battery (included, with USB charging cable)
• Ekspozisyon: Retroeklere LCD
• Dimansyon (Reseptè): Approximately 4.33 inches (length)
• Pwa (Atik): Apeprè 11.2 ons

9. Garanti & Sipò

ThermoPro bay yon garanti pou pwodui sa a kont domaj nan materyèl ak nan fabrikasyon. Pou enfòmasyon detaye sou garanti a, anrejistreman pwodui, oswa sipò teknik, tanpri vizite sit ofisyèl ThermoPro a. websit la oubyen kontakte sèvis kliyan yo dirèkteman.

Ofisyèl Websit: www.thermopro.com

Sipò Kliyan: Refer to the contact information provided on the ThermoPro websit oswa anbalaj pwodwi a.