Entwodiksyon
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Enfòmasyon enpòtan sou sekirite
- Risk chòk elektrik: Always disconnect power before installing or replacing the bulb.
- Andedan kay la / Deyò Itilize: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- Voltage: Asire aparèy voltage is 120V. Do not use with incompatible voltage.
- Dimming: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Tanperati: Do not operate outside the specified temperature range of -20°C to +45°C.
- Manyen: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Dispozisyon: Dispose of LED bulbs according to local regulations.
Enstalasyon ak Enstalasyon
- Pouvwa Off: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Retire ansyen anpoul: Avèk anpil atansyon, devise anpoul ki deja egziste a nan aparèy la.
- Mete yon nouvo anpoul: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Pouvwa sou: Retabli pouvwa nan aparèy la.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Operasyon
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Kontwòl klète: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Kalite limyè: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Pwopagasyon gwo bout bwa: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Antretyen
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Netwayaj: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Ranplasman: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Depanaj
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Anpoul pa limen:
- Ensure the power supply to the fixture is on.
- Tcheke si anpoul la byen vise.
- Teste anpoul la nan yon lòt aparèy ki fonksyone pou asire w ke li pa gen pwoblèm.
- Verify the fixture itself is operational.
- Flickering or Inconsistent Light:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Asire voltage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | S12535 |
| Wattage | 5 Watt (ekivalan enkandesan 40W) |
| Klète | 425 Lumen |
| Tanperati Koulè | 5000K (Blan Natirèl) |
| Fòm anpoul | ST19 |
| Kalite baz | E26 baz mwayen |
| Endèks rann koulè (CRI) | 92 |
| Angle gwo bout bwa | 300 Degre |
| Voltage | 120V |
| Dimmable | Yes (with compatible 120V dimmers) |
| Rated lavi | 15,000 èdtan |
| Rating anviwònman an | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Tanperati Fonksyònman | -20°C pou +45°C |
| Sètifikasyon | cULus, FCC, RoHS |
| Faktè pouvwa | 0.7 |
| Frekans | 60Hz |
| Pwa Atik (pake 6) | 1.06 liv |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Garanti ak sipò
The Satco S12535 ST19 LED Light Bulb is backed by a Garanti manifakti 2 zan soti nan dat acha a.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco websit pou jwenn enfòmasyon kontak aktyèl.
Websit: www.satco.com