1. Entwodiksyon
Thank you for choosing the TECKNET Hybrid Active Noise Cancelling Bluetooth Headphones, Model TK-HS049. These over-ear wireless headphones are designed to provide a superior audio experience with advanced noise cancellation, comfortable wear, and extended battery life. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Imaj: Devan view of the TECKNET Hybrid Active Noise Cancelling Bluetooth Headphones.
2. Pake kontni
Tanpri verifye sa ki nan pake a lè w ap debale l. Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte sèvis kliyan.
- TECKNET Hybrid Active Noise Cancelling Bluetooth Headphones (TK-HS049)
- USB-C Chaje Kab
- 3.5mm Audio Kab
- Manyèl itilizatè
3. Kontwòl ak Endikatè
Familiarize yourself with the buttons and ports on your headphones for optimal use.
Imaj: Bò kote view of the headphones highlighting control buttons and ports.
- Bouton pouvwa: Peze epi kenbe pou limen/etenn. Peze yon ti kras pou jwe/pran yon poz.
- Volim Up / Next Track: Peze yon ti kras pou ogmante volim, peze lontan pou pwochen mizik la.
- Volim Dawonn / Previous Track: Peze yon ti kras pou bese volim nan, peze lontan pou ale nan mizik anvan an.
- Bouton ANC: Press to cycle through Active Noise Cancellation modes (Hybrid ANC, Normal, Transparency).
- USB-C chaje pò: Pou chaje kas ekoutè yo.
- 3.5mm Audio Port: Pou koneksyon filaire.
- Endikatè ki ap dirije: Montre estati pouvwa, koneksyon, ak chaj.
4. Enstalasyon
4.1. Chaje kas ekoutè yo
- Konekte kab chaje USB-C a nan pò chaje ki sou kas ekoutè a.
- Konekte lòt bout kab la nan yon adaptè kouran USB (pa enkli) oubyen nan yon pò USB òdinatè.
- The LED indicator will show red during charging and turn off or blue when fully charged.
- Yon chaj konplè pran apeprè 2-3 èdtan anjeneral.
4.2. Pè Bluetooth
- Asire w ke kas ekoutè yo etenn.
- Press and hold the Power Button for approximately 5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
- Sou aparèy ou an (telefòn entelijan, tablèt, òdinatè pòtab), aktive Bluetooth epi chèche aparèy ki disponib yo.
- Select "TECKNET TK-HS049" from the list of devices.
- Once connected, the LED indicator will flash blue slowly or remain solid blue.
4.3. Koneksyon filaire (AUX Mode)
You can use the headphones with a 3.5mm audio cable when the battery is low or for devices without Bluetooth connectivity.
- Plug one end of the 3.5mm audio cable into the headphone's 3.5mm audio port.
- Branche lòt bout la nan priz pwodiksyon odyo aparèy ou an.
- The headphones will automatically switch to wired mode. Bluetooth functions and ANC may be limited or unavailable in wired mode depending on the headphone's power status.
5. Opere
5.1. Power On/Off
- Pouvwa sou: Press and hold the Power Button for 2-3 seconds until the LED indicator lights up.
- Pouvwa Off: Press and hold the Power Button for 3-4 seconds until the LED indicator turns off.
5.2. Mizik lèktur
- Jwe/Poz: Kout peze bouton pouvwa a.
- Volim moute: Peze bouton Volim Monte a yon ti tan.
- Volim desann: Peze bouton Diminye Volim nan yon ti tan.
- Pwochen Track: Peze bouton Volim Monte a pandan lontan.
- Track Previous: Peze bouton Diminye Volim nan pandan lontan.
5.3. Rele Jesyon
- Reponn/Fen Apèl: Kout peze bouton pouvwa a.
- Rejte apèl: Long peze bouton pouvwa a.
- Recomposition Dènye Nimewo: Double-press the Power Button (if supported by your device).
5.4. Mòd Anilasyon Bri Aktif (ANC)
Press the ANC Button to cycle through the available noise cancellation modes:
Image: Explanation of different noise control modes.
- Hybrid ANC Mode: Blocks up to 95% of ambient noise, ideal for travel or noisy environments.
- Mòd nòmal: Standard audio experience without active noise cancellation.
- Mòd transparans: Allows you to hear your surroundings while listening to audio, enhancing environmental awareness.
5.5. Multiple Device Connections
The headphones support connecting to multiple devices, allowing seamless switching.
Image: Illustration of multiple device connectivity.
- Pair the headphones with each desired device following the Bluetooth pairing instructions (Section 4.2).
- To switch between connected devices, simply pause audio on the current device and start playback on the other. The headphones will automatically switch the audio source.
6. Antretyen
6.1. Netwayaj
- Siye kas ekoutè yo ak yon twal mou, sèk, epi ki pa gen pousyè.
- Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa espre chimik.
- Clean ear cushions gently with a slightly damp twal si sa nesesè, epi kite yo seche nèt nan lè a anvan ou itilize yo.
6.2. Depo
- Sere kas ekoutè yo nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
- If storing for an extended period, charge the headphones at least once every three months to preserve battery life.
6.3. Swen batri
- Evite dechaje batri a nèt souvan.
- Pa ekspoze batri a nan tanperati ki wo.
- Use only the provided charging cable or a certified USB-C cable.
NAN. Depanaj
Si ou rankontre pwoblèm ak kas ekoutè ou yo, gade pwoblèm ak solisyon komen sa yo.
| Pwoblèm | Solisyon posib |
|---|---|
| Kas ekoutè yo pa limen. | Asire w ke kas ekoutè yo byen chaje. Konekte yo nan yon sous kouran epi eseye ankò. |
| Pa ka konekte ak aparèy la. | Ensure headphones are in pairing mode (flashing blue/red LED). Turn off and on Bluetooth on your device. Clear previous Bluetooth connections on your device. |
| Pa gen son oswa volim nan ba. | Check headphone and device volume levels. Ensure headphones are properly connected via Bluetooth or AUX. Try another audio source. |
| ANC a pa fonksyone byen. | Ensure ANC mode is activated. Check that the earcups form a good seal around your ears. |
| Koneksyon tanzantan. | Move closer to your device. Avoid obstacles between headphones and device. Ensure no other strong wireless signals are interfering. |
8. Espesifikasyon
Key technical details of the TECKNET Hybrid Active Noise Cancelling Bluetooth Headphones.
Image: Playback time details for the headphones.
Image: Details on the 40mm dynamic drivers for audio quality.
- Modèl: TK-HS049
- Koneksyon: Bluetooth 6.0, AUX 3.5mm
- Kontwòl bri: Anile ibrid aktif bri
- Audio Driver: 40mm chofè dinamik
- Gamme frekans: 20Hz - 20,000Hz
- Lavi batri: Up to 50 hours (average, may vary with ANC usage)
- Metòd kontwòl: Physical Buttons (Volume, Power, ANC)
- Plasman Zòrèy: Sou-zòrèy
- Materyèl: Fabric, Silicone, Memory Foam
- Rezistans dlo: Waterproof (Note: While rated waterproof, avoid prolonged submersion or exposure to harsh conditions.)
- Aparèy konpatib: Smartphones, Laptops, Tablets, Gaming Consoles, Computers, Smart Speakers, Cars (with Bluetooth support)
- Koulè: Nwa
9. Enfòmasyon sou Sekirite
- Do not use the headphones at excessively high volumes for extended periods to prevent hearing damage.
- Do not use the headphones in situations where inability to hear ambient sounds could be dangerous (e.g., driving, cycling, walking in traffic).
- Kenbe kas ekoutè yo lwen tanperati ekstrèm, imidite, ak sibstans koroziv.
- Pa eseye demonte oswa modifye kas ekoutè yo. Sa ap anile garanti a epi li ka domaje yo.
- Jete pwodwi a ak batri a dapre règleman lokal yo. Pa jete l nan fatra kay la.
10. Garanti ak sipò
TECKNET products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please visit the official TECKNET websit la oubyen kontakte sèvis kliyan yo dirèkteman. Tanpri konsève prèv acha ou a pou reklamasyon garanti.