Enfòmasyon enpòtan sou sekirite
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Aparèy chofaj sa a fèt pou hardwired installation only. It is not a plug-in unit.
- Chofaj sa a does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Enstalasyon an dwe fèt pa yon elektrisyen kalifye, dapre tout kòd elektrik nasyonal ak lokal yo.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Enstalasyon ak Enstalasyon
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Montaj
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Koneksyon elektrik
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Enstriksyon Operasyon
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Pouvwa sou: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Mete tèmosta a: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Operasyon trankil: This convector heater operates silently, providing consistent warmth without fan noise.
- Premye itilizasyon: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Antretyen
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Netwayaj: Netwaye deyò aparèy chofaj la detanzantan avèk yon twal mou, damp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Retire pousyè: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Enspeksyon: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Depanaj
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Chofaj pa limen. | Pa gen ekipman pou pouvwa. Thermostat mete twò ba. Faulty wiring or thermostat. | Tcheke disjoncteurs. Ogmante anviwònman thermostat. Konsilte yon elektrisyen ki kalifye. |
| Aparèy chofaj la pa pwodui ase chalè. | Gwosè chanm nan depase kapasite chofaj la. Airflow obstructed. Thermostat calibration issue. | Ensure heater matches room size (up to 150 sq ft). Clear obstructions from grilles. Recalibrate or replace thermostat. |
| Odè dwòl pandan operasyon. | Initial burn-off of manufacturing residues. Akimilasyon pousyè sou eleman chofaj la. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Mak | Stelpro |
| Nimewo Modèl | ASHC1502WCW |
| Wattage | 1500W (nan 240V) / 1125W (nan 208V) |
| Voltage | 240 Volts |
| Ampepòk | 6.25 Amps |
| Dimansyon pwodwi (D x W x H) | 3.94" x 28.63" x 17.56" (101mm x 727mm x 446mm) |
| Pwa atik | 15.7 liv |
| Kouvèti chofaj | Up to 150 sq feet |
| Karakteristik espesyal | Efikas nan enèji, Chofaj rapid, San bri |
| Faktè fòm | Kabinè |
| Koulè | Blan |
| Kalite aliye | Mi mòn |
| Kalite gaz | Elektrik |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| UPC | 626296203491 |
Garanti
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5-ane garanti limite on the entire unit.
- Garanti pou tout lavi sou eleman chofaj la.
- 3 ane garanti on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro websit.
Sipò
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro websit: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.