Bosch 18V System Cordless Angle Grinder PWS 18V-70

Entwodiksyon

The Bosch PWS 18V-70 cordless angle grinder is designed for small to medium cutting, grinding, and polishing tasks. This tool offers a powerful motor, a compact design, and low weight for comfortable and fatigue-free operation. Key safety features include soft start and restart protection. The quick-adjust guard allows for tool-free position changes, enhancing user convenience and safety. This tool is part of the POWER FOR ALL ALLIANCE, ensuring battery compatibility with a wide range of tools from various brands.

The Bosch PWS 18V-70 is part of the POWER FOR ALL ALLIANCE, allowing battery interchangeability across multiple brands and tools.

Enstriksyon Sekirite

Always observe the following safety precautions when operating the Bosch PWS 18V-70 angle grinder:

• Li tout manyèl la: Familyarize w ak tout enstriksyon ak avètisman yo anvan w itilize li.
• Mete ekipman pwoteksyon pèsonèl: Always use safety goggles, hearing protection, gloves, and a dust mask.
• Sere pyès travay la byen: Ensure the material being worked on is stable and cannot move during operation.
• Check the disc: Before each use, inspect the grinding or cutting disc for damage. Do not use damaged discs.
• Kenbe yon priz fèm: Toujou kenbe zouti a byen fèm ak tou de men.
• Evite demaraj aksidantèl: Asire switch la se nan pozisyon an koupe anvan ou mete pake batri a.
• Kenbe zòn travay pwòp: Zòn ankonbre envite aksidan.
• Pa depase: Kenbe bon pye ak balans tout tan.
• Dekonekte kouran an: Retire pake batri a anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti a.

Enstalasyon

1. Enstalasyon batri: Insert a charged 18V POWER FOR ALL battery pack into the battery slot until it clicks into place. Ensure it is securely fastened.
2. Atachman Manch Oksilyè: Screw the auxiliary handle into one of the designated threaded holes on the gear head. Choose the position that provides the best control and comfort for your task.
3. Ajisteman Gad: The protective guard can be adjusted quickly without tools. Press the release lever, rotate the guard to the desired position to protect against sparks and debris, and then release the lever to lock it in place.
4. Enstalasyon disk:
   • Peze epi kenbe bouton an fèmen file koton.
   • Using the appropriate wrench, loosen and remove the clamping nwa.
   • Place the desired 125 mm grinding or cutting disc onto the flange, ensuring it is correctly seated.
   • Ranplase cl laamping nut and tighten it firmly with the wrench while holding the spindle lock button.

Key features of the PWS 18V-70 include spindle lock for safety, 700W motor for high performance, 115/125mm disc options, ergonomic handle for comfort, tool-free guard adjustment, and versatile grinding protection.

Opere

The PWS 18V-70 features a soft start function for smooth power-up and restart protection to prevent accidental startup after a power interruption.

1. Limen: Slide the ON/OFF switch forward. The tool will start with a soft start, gradually reaching full speed.
2. Etenn: Slide the ON/OFF switch backward to the OFF position.
3. Grinding and Cutting:
   • Aplike yon presyon lejè, inifòm. Pa fòse zouti a.
   • Maintain a consistent angle for optimal results and disc longevity.
   • For cutting, use a cutting disc and make shallow passes, gradually deepening the cut.
   • For grinding, move the tool back and forth over the surface.

The powerful cordless angle grinder is suitable for minor and intermediate cutting, grinding, and polishing tasks.

Its ergonomic and comfortable design, with a slim housing and lightweight construction, ensures easy handling during prolonged use.

Antretyen

Regular maintenance ensures the longevity and safe operation of your tool.

• Netwayaj: Netwaye fant vantilasyon yo regilyèman pou anpeche yo chofe twòp. Sèvi ak yon bwòs mou oswa lè konprese. Pa sèvi ak dlo oswa solvan.
• Ranplasman Disk: Replace worn or damaged grinding/cutting discs promptly. Follow the disc installation steps in the Setup section.
• Swen batri: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries using only Bosch-approved chargers.
• Enspeksyon jeneral: Periodically check all screws and fasteners for tightness. Ensure the guard is functioning correctly.

Depanaj

If you encounter issues with your PWS 18V-70, refer to the following common problems and solutions:

• Zouti a pa kòmanse:
  • Check if the battery is fully charged and correctly inserted.
  • Asire w ke switch ON/OFF la byen angaje.
  • If the tool has restart protection, ensure it was not triggered by a power interruption. Remove and reinsert the battery.
• Reduced performance or excessive vibration:
  • Inspect the grinding/cutting disc for wear or damage. Replace if necessary.
  • Ensure the disc is correctly mounted and the clamping nwa se sere boulon.
  • Clean any debris from the tool's ventilation slots.
• Surchof:
  • Diminye chaj la sou zouti a.
  • Ensure ventilation slots are clear.
  • Pèmèt zouti a refwadi.

If problems persist, contact Bosch customer service or an authorized service center.

Espesifikasyon

The following table details the technical specifications for the Bosch PWS 18V-70 cordless angle grinder:

The PWS 18V-70 features a quick-adjust guard, restart protection, compact design, and ergonomic handling.

Garanti ak sipò

Bosch power tools are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Bosch websit.

For technical support, spare parts, or service inquiries, please contact your local Bosch service center. You can find contact information on the Bosch website or in the warranty card provided with the tool.

Remember that the PWS 18V-70 is part of the POWER FOR ALL ALLIANCE, meaning its 18V battery is compatible with a wide range of tools from participating brands. This offers flexibility and cost savings for your tool collection.