DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Enfòmasyon sou Sekirite

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Toujou mete linèt sekirite oswa linèt sekirite ak pwoteksyon bò ak, jan sa nesesè, yon plak pwotèj plen figi lè w ap opere pwodui sa a.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Pwodwi souview

Kontni pake

• San fil Brad Nailer
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah Li-ion batri
• 1-èdtan Quick Charger
• Ka pote
• Manyèl Enstriksyon

Konpozan zouti

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Dimansyon ak pwa

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Longè: 10.83 pous (27.5 cm)
• Lajè: 9.45 pous (24 cm)
• Weight: 6.19 lbs (without battery)

3. Enstalasyon

Enstalasyon batri

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Aliyen batri a ak fant batri a sou zouti a.
3. Glise batri a nan fant lan jiskaske li fè yon klik byen fèm nan plas li.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Peze bouton lage a epi rale kouvèti magazin an.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Fèmen kouvèti magazin an jiskaske li angaje ak bouton lage a.

Zong Viewer Fenèt

Klou a viewer window allows you to quickly check the fastener level. When the window shows wouj, it indicates the magazine is without nails. When it shows nwa, it indicates the magazine contains nails.

4. Operasyon Enstriksyon

Mòd tire

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Single Tire Mode

• Shift the mode switch to the bò gòch (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Kontakte mòd tire

• Shift the mode switch to the bò dwat (contact firing icon).
• Peze deklanche la.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Nòt: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Ajisteman pwofondè

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Ki ap dirije ekleraj

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Endikatè ki ap dirije

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Wouj sou: Batri ki ba.
• Flache wouj: Nails/staples are jammed.
• Vèt sou: No nails/staples in the magazine.
• Green kap flache: Surchof.
• Limyè koupe: Eta operasyon nòmal.

Videyo pwodwi ofisyèl la

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Antretyen

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Swen batri

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Sere batri a nan yon kote ki fre, sèk lwen limyè solèy la dirèk ak tanperati ekstrèm.

NAN. Depanaj

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Espesifikasyon

Fasteners konpatib

Figure 9: Compatible nail and staple types.

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.