Reloop RP-7 Professional 7-inch Turntable System User Manual

Entwodiksyon

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Enstriksyon Sekirite

• Pwovizyon pou pouvwa: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Dlo ak imidite: Pa ekspoze aparèy la anba lapli, imidite, oswa imidite twòp. Pa mete objè ki plen likid, tankou vaz, sou aparèy la.
• Vantilasyon: Asire w ke gen ase vantilasyon toutotou aparèy la. Pa bloke ouvèti vantilasyon yo.
• Sous Chalè: Kenbe aparèy la lwen sous chalè tankou radyatè, recho, recho, oswa lòt aparèy (ki gen ladan amplifiers) ki pwodui chalè.
• Netwayaj: Disconnect the power cord before cleaning. Use a dry cloth only.
• Sèvis: Pa eseye fè sèvis pwodui sa a tèt ou. Refere tout sèvis yo bay pèsonèl sèvis kalifye.
• Plasman: Mete platin an sou yon sifas ki estab e plat pou anpeche li vibrasyon epi pou asire li fonksyone byen.

Kontni pake

Verifye ke tout atik yo prezan nan pakè a:

• Reloop RP-7 Professional 7-inch Turntable System
• RCA Cable
• Pouvwa kab
• Slipmat
• Kontrepwa
• Headshell with cartridge (may vary by region/package)
• Manyèl Itilizatè (dokiman sa a)

Pwodwi souview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Devan view of the Reloop RP-7 Professional 7-inch Turntable System, showcasing the platter, tonearm, and controls.

Karakteristik kle:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Multiple Playback Speeds: Supports 33 1/3, 45, and 78 RPM.
• Limyè LED detachable: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Enstalasyon

1. Debalaj ak plasman:

• Ak anpil atansyon retire tout eleman nan anbalaj la.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Gently place the aluminum platter onto the spindle.
• Place the slipmat on top of the platter.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or amplifier.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or amplifikatè pou minimize ronfleman.

Dèyè view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Koneksyon pouvwa:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Enstriksyon Operasyon

1. Limen/Etenyen:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Peze a 33, 45, oswa 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Mete yon dosye sou plato a.
• Peze a KÒMANSE/KANPE bouton pou kòmanse wotasyon plato a.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the KÒMANSE/KANPE bouton.

4. Pitch Adjustment:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Peze a RESET button to instantly return the platter speed to 0% pitch adjustment.

5. Sèvi ak limyè ki ap dirije a:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Antretyen

1. Netwayaj Inite a:

• Toujou dekonekte kouran an anvan w netwaye.
• Sèvi ak yon twal mou epi sèk pou siye sifas platin nan. Pa sèvi ak pwodui netwayaj abrazif, sir, oswa solvan.
• For the platter, use a slightly damp cloth if necessary, then dry thoroughly.

2. Stylus Care:

• Netwaye stylet la regilyèman avèk yon bwòs mou ki fèt pou netwaye stylet, fwote dousman soti dèyè pou rive devan.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Store records vertically in their sleeves to prevent warping.

Depanaj

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Espesifikasyon

Garanti ak sipò

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

Ou ka jwenn plis enfòmasyon ak resous sipò sou Reloop Store on Amazon or the official Reloop websit.