1. Entwodiksyon
Mèsi pou acha aasing the EVO HV18S 2-in-1 High-Velocity Fan. This fan is designed to provide powerful airflow for various indoor environments, functioning as both a floor fan and a wall-mounted unit. Its durable construction and adjustable features ensure effective cooling wherever needed. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Figi 1: Devan view of the EVO HV18S High-Velocity Fan.
2. Enstriksyon Sekirite
Pou diminye risk dife, chòk elektrik, oswa blesi, obsève prekosyon sekirite sa yo:
- Toujou debranche vantilatè a anvan ou netwaye oswa fè antretyen.
- Do not operate the fan with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
- Keep fingers and other objects away from the fan blades and openings during operation.
- Do not use the fan near windows, in wet areas, or where it may be exposed to water.
- Ensure the fan is placed on a stable, level surface when used as a floor fan.
- When wall-mounting, ensure the mounting surface is structurally sound and capable of supporting the fan's weight.
- Vantilatè sa a se pou itilizasyon andedan kay la sèlman.
- Pa sèvi ak fanatik la ak nenpòt aparèy kontwòl vitès nan eta solid.
- Supervise children when the fan is in use.
3. Pake kontni
Verifye ke tout konpozan yo prezan nan pake a:
- EVO HV18S High-Velocity Fan Unit
- Floor Stand/Mounting Bracket
- Materyèl pou monte sou miray la (vis, lank)
- Manyèl itilizatè
4. Enstriksyon Enstalasyon
4.1 Floor Fan Setup
- Mete fanatik la sou yon sifas ki plat ki estab.
- Ensure the power cord is not obstructed and is within reach of a grounded electrical outlet.
- Adjust the tilt head to direct airflow as desired (refer to Section 5.3).

Figure 2: EVO HV18S fan operating as a floor unit.
4.2 Wall Mount Setup
- Identify a suitable wall location that is structurally sound and can support the fan's weight (approximately 11.82 lbs).
- Using the mounting bracket as a template, mark the drill points on the wall.
- Fè twou gid epi mete lank miray si sa nesesè.
- Fikse sipò montaj la sou miray la avèk vis yo bay yo.
- Attach the fan unit to the secured wall bracket, ensuring it is firmly in place.
- Adjust the tilt head to direct airflow as desired (refer to Section 5.3).

Figure 3: EVO HV18S fan installed as a wall-mounted unit.
5. Operasyon Enstriksyon
5.1 Limen/Etenyen
Plug the fan into a standard 120V AC grounded electrical outlet. The fan is equipped with a rotary switch located on the rear of the unit.

Figi 4: Dèyè view displaying the control knob.
5.2 Anviwònman vitès
Rotate the control knob to select the desired fan speed:
- 0: Off
- 1: Vitès ki ba
- 2: Vitès Mwayen
- 3: Gwo vitès
5.3 Ajisteman Enklinasyon an
The fan head can be tilted to direct airflow. Loosen the adjustment knobs on either side of the fan housing, position the fan head to the desired angle, and then tighten the knobs securely to lock it in place.

Figi 5: Side view illustrating the adjustable tilt feature.
6. Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite fanatik ou an.
- Netwayaj: Toujou debranche vantilatè a anvan ou netwaye li. Sèvi ak yon twal mou.amp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or allow water to drip into the motor housing.
- Netwayaj lam: Periodically, the fan blades may accumulate dust. To clean, carefully remove the front grille (if applicable and designed for user removal, otherwise consult a professional) and wipe the blades with a soft cloth. Reattach the grille securely before operating.
- Depo: Lè w pa itilize vantilatè a pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, de preferans nan anbalaj orijinal li.
NAN. Depanaj
Si ou rankontre pwoblèm ak vantilatè ou a, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Vantilatè a pa limen. | Pa gen ekipman pou pouvwa. Fan switch is off. | Asire w ke vantilatè a branche nan yon priz ki fonksyone. Turn the control knob to a speed setting (1, 2, or 3). |
| Flux lè fèb. | Anviwònman vitès ba. Obstruction in front/back of fan. Dirty blades. | Ogmante vitès la. Retire tout obstak. Clean the fan blades (refer to Section 6). |
| Vantilatè a fè yon bri dwòl. | Pati ki lach. Vantilatè a pa sou yon sifas ki stab. | Check for any loose screws or components. Ensure the fan is on a stable, level surface. |
8. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Mak | EVO |
| Non modèl | HV18S |
| Konsepsyon fanatik elektrik | Floor Fan (convertible to wall mount) |
| Sous pouvwa | Elektrik (Kòd) |
| Wattage | 75 wat |
| Kantite Nivo Pouvwa | 3 |
| Metòd kontwòl | Push Button (Rotary Knob) |
| Karakteristik espesyal | Enklinasyon reglabl |
| Dimansyon pwodwi | 19.9"D x 8.3"W x 20.5"H |
| Pwa atik | 11.82 liv |
| Itilizasyon Andedan kay la / Deyò | Andedan kay la |
| Kalite enstalasyon | Floor and Wall Mount |
| Koulè | Nwa |
| UPC | 860011378174 |
9. Garanti ak sipò
This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or visit the official EVO websit la. Kenbe resi acha ou kòm prèv acha.