1. Garanti enpòtan
Please read all instructions carefully before using your KEENSTAR ICN1580 Nugget Ice Maker. Keep this manual for future reference.
- Ensure the appliance is connected to a properly grounded electrical outlet.
- Pa plonje kòd kouran an, ploge a, oswa okenn pati nan aparèy la nan dlo oswa lòt likid.
- Unplug the ice maker from the outlet before cleaning, servicing, or when not in use.
- Keep children away from the ice maker. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Pa opere nenpòt aparèy ki gen yon kòd oswa ploge ki domaje, oswa apre aparèy la fonksyone mal oswa li te domaje nan nenpòt fason. Kontakte sèvis kliyan pou asistans.
- Sèvi ak dlo potab sèlman nan machin glas la.
- Pa mete machin glas la toupre sous chalè oswa anba limyè solèy dirèk.
- Ensure adequate ventilation around the appliance. Maintain at least 5 inches of space on all sides.
2. Pwodwi souview
The KEENSTAR ICN1580 is a countertop nugget ice maker designed to produce soft, chewable ice. It features a stainless steel exterior, a touch screen control panel, and a self-cleaning function. With a 2.1-liter water tank, it can produce up to 40 lbs of ice per day.
Karakteristik kle:
- Produces soft, chewable nugget ice.
- High ice production capacity: up to 40 lbs per 24 hours.
- 2.1L water tank capacity.
- Intuitive touch screen control panel.
- Fonksyon oto-netwayaj otomatik.
- Ice full and add water indicator lights.
- Removable ice basket for easy ice transfer.
Eleman pwodwi:

Figi 2.1: KEENSTAR ICN1580 Nugget Ice Maker with its removable ice basket and scoop. This image shows the overall design and key accessories.

Figi 2.2: Fèmen view of the removable ice basket, highlighting its design for easy handling and ice transfer.
3. Enstalasyon
3.1 Debake
Carefully remove all packaging materials. Inspect the ice maker for any damage. If any damage is found, do not operate the appliance and contact customer service.
3.2 Plasman
- Place the ice maker on a flat, stable, and level surface.
- Ensure there is at least 5 inches (12.7 cm) of clear space around the unit for proper ventilation.
- Evite mete aparèy la toupre sous chalè (pa egzanp, fou, radyatè) oswa anba limyè solèy dirèk.
3.3 Netwayaj Premye
Before first use, it is recommended to clean the ice maker. Follow these steps:
- Fill the water reservoir with potable water up to the MAX fill line.
- Press and hold the 'SELFCLEAN' button for more than 3 seconds to activate the self-cleaning cycle.
- Sik netwayaj la ap dire apeprè 7 minit.
- Once the cycle is complete, drain the water from the unit using the drainage outlet (refer to Section 5.2 for draining instructions).
- Rense enteryè a avèk dlo fre epi vide dlo a ankò.

Figi 3.1: Illustration of the automatic self-cleaning process, showing water circulation within the unit.
4. Operasyon
4.1 Kontwòl Panel
The ice maker features an intelligent touch control panel with indicator lights and operation buttons.

Figi 4.1: The intelligent touch control panel with indicator lights for 'Add Water', 'Ice Full', 'Cleaning', and 'Power', along with buttons for 'Selfclean', 'LED Light', and 'ON/OFF'.
- Indicator Light Zone: Displays status for 'Add Water', 'Ice Full', 'Cleaning', and 'Power'.
- Operation Touch Zone: Includes 'Selfclean Button', 'LED Light Button', and 'ON/OFF Button'.
4.2 Fè Glas
To start making ice, follow these simple steps:
- Ensure the ice maker is plugged into a grounded electrical outlet.
- Open the top lid and fill the water reservoir with potable water up to the MAX fill line. Do not overfill.
- Fèmen kouvèti anwo a.
- Press the 'ON/OFF' button to turn on the unit. The ice making process will begin automatically.
- The ice maker will produce fresh ice in approximately 12 minutes.

Figi 4.2: The ice maker actively producing nugget ice, with an indication of 12 minutes for fresh ice production.
4.3 Endikatè Limyè
- Ajoute Endikatè Dlo: A red light will illuminate when the water reservoir needs refilling. Ice production will pause until water is added.
- Glas Endikatè konplè: A red light will illuminate when the ice basket is full. Ice production will pause until ice is removed.
- Endikatè pouvwa: A white light indicates the unit is powered on.

Figi 4.3: The 'Ice Full' indicator light, showing a red light when the ice basket is full.

Figi 4.4: Illustrates the process of refilling the water reservoir, ensuring water does not exceed the maximum fill line.
5. Antretyen
Antretyen regilye asire pèfòmans optimal ak lonjevite machin glas ou a.
5.1 Netwayaj chak jou
For daily cleaning, use the automatic self-cleaning function:
- Asire w ke rezèvwa dlo a plen ak dlo potab.
- Press and hold the 'SELFCLEAN' button for more than 3 seconds.
- The cycle will run for 7 minutes.
- After the cycle, drain the water as described in Section 5.2.
5.2 Vide Dlo
To drain water from the ice maker:
- Debranche machin glas la nan priz kouran an.
- Locate the drainage outlet at the bottom or side of the unit.
- Place a container under the outlet to collect the water.
- Retire bouchon drenaj la pou kite dlo a koule soti.
- Yon fwa tout dlo a fin vide, remete bouchon drenaj la byen fèm.

Figi 5.1: Shows the drainage outlet located at the back of the ice maker, making it easy to drain water into a sink.
5.3 Descaling (Hard Water Areas)
If you live in an area with hard water, mineral buildup (scale) can affect the ice maker's performance and cause noise. Descale the unit once a week or more often if necessary.
- Stop the machine and allow any internal ice to melt.
- Retire ekran filtre a.
- Run a self-clean cycle with a descaling solution (e.g., a mixture of water and vinegar or a commercial descaling agent suitable for ice makers). Follow the descaling solution manufacturer's instructions.
- Clean the front and back sides of the filter screen.
- Rinse thoroughly by running several self-clean cycles with fresh water.

Figi 5.2: Illustrates how hard water can affect the ice maker and shows the location of the filter screen for cleaning.
NAN. Depanaj
If you encounter issues with your ice maker, refer to the following table for common problems and solutions.
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Machin glas la pa pwodui glas. | Pa gen dlo nan rezèvwa a; pwoblèm kouran; tanperati anbyen an twò wo. | Fill water reservoir; check power connection; ensure unit is in a cool, well-ventilated area. |
| Pwodiksyon glas la ralanti oubyen glas la twò mens. | High ambient temperature; poor ventilation; water quality. | Move unit to a cooler location; ensure proper ventilation; use filtered water. |
| Machin glas la fè bri. | Mineral buildup (scale); unit not level; internal components. | Perform descaling (Section 5.3); ensure unit is on a level surface; contact customer service if noise persists. |
| 'Add Water' indicator is on. | Dlo rezèvwa vid. | Ranpli rezèvwa dlo a ak dlo potab. |
| 'Ice Full' indicator is on. | Panyen glas la plen. | Retire glas nan panyen an. |
| Ice maker stops mid-cycle. | Ice full sensor triggered; water low sensor triggered; internal malfunction. | Check ice basket and water level; if problem persists, contact customer service. |
7. Espesifikasyon
Technical specifications for the KEENSTAR ICN1580 Nugget Ice Maker.
| Spesifikasyon | Valè |
|---|---|
| Mak | KEENSTAR |
| Non modèl | ICN1580 |
| Dimansyon pwodwi | 18.5"D x 13.7"W x 11.4"H |
| Kapasite (Tank Dlo) | 2.1 lit |
| Wattage | 150 wat |
| Voltage | 120 Volts |
| Refrijeran | R600a |
| Pwodiksyon glas pa jou | 40 liv |
| Materyèl | Nerjaveèi asye |
| Pwa atik | 20 liv |
8. Garanti ak sipò
KEENSTAR offers a 30-day money-back guarantee and free replacement within 1 year from the date of purchase. Lifetime after-customer service is also provided.
If you experience any issues or have questions regarding your KEENSTAR ICN1580 Nugget Ice Maker, please contact KEENSTAR customer service for prompt assistance. Refer to your purchase documentation for specific contact details.