Manyèl Itilizatè Flash Kamera Mini MEDALight F30 la

1. Entwodiksyon

Mèsi pou acha aasing the MEDALight F30 Mini Camera Flash. This compact and powerful manual hot shoe flash is designed to provide versatile lighting for your photography needs. With its GN15 guide number and 7 power levels, it offers precise control over light output. Please read this manual thoroughly before using the product to ensure proper operation and to maximize its performance.

2. Ki sa ki nan bwat la

• MEDALight F30 Mini Camera Flash
• Bwat kado

3. Enfòmasyon sou Sekirite

Pou evite domaj nan pwodwi a oswa blese tèt ou oswa lòt moun, tanpri obsève prekosyon sekirite sa yo:

• Do not disassemble, repair, or modify the flash unit.
• Kenbe flach la sèk. Pa ekspoze l anba lapli, imidite, oswa gwo imidite.
• Do not touch the flash tube immediately after firing, as it can be very hot.
• Kenbe soti nan atenn timoun yo.
• Use only the specified battery type (9V battery). Ensure correct polarity when inserting batteries.
• Retire pil yo si ou pa pral itilize flach la pou yon peryòd tan pwolonje.

4. Pati Idantifikasyon

This image displays the MEDALight F30 Mini Camera Flash. The main view shows the flash unit attached to a camera's hot shoe. In the upper left, a front view of the flash highlights the flash tube and the 'MEDALight' logo. In the upper center, a side view reveals the 'ON/OFF' switch. In the upper right, a top view shows the power level indicators (1/1 to 1/64), a charge indicator, and '+' and '-' buttons for adjustment, along with S1 and S2 optical slave modes.

1. Tib Flash: Emits light for illumination.
2. ON / OFF switch: Powers the flash unit on or off.
3. Power Level Indicators: LEDs indicating the current power output (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64).
4. Endikatè Chaj: LED that illuminates when the flash is ready to fire.
5. Bouton '+': Increases flash power output.
6. Bouton '-': Decreases flash power output.
7. Monte soulye cho: Konekte flach la ak soulye cho kamera a.
8. S1/S2 Optical Slave Sensors: Detect other flash bursts for off-camera triggering.

5. Enstalasyon

5.1 Enstalasyon batri

1. Jwenn kouvèti konpatiman batri a sou inite flash la.
2. Louvri kouvèti a.
3. Insert one 9V battery (included) into the compartment, ensuring correct polarity (+/-).
4. Fèmen kouvèti lòj batri a byen.

5.2 Monte sou Kamera

1. Slide the hot shoe mount of the F30 flash into your camera's hot shoe slot.
2. Tighten the locking ring on the flash unit to secure it firmly to the camera.
3. Ensure the flash is properly seated and stable before use.

6. Operasyon Enstriksyon

6.1 Limen/Etenyen

Glise a ON/OFF switch to the 'ON' position to power on the flash. Slide it to 'OFF' to power off.

6.2 Ajiste Nivo Puisans yo

Once powered on, the flash will begin charging. The charge indicator LED will illuminate when the flash is ready to fire. Use the '+' epi '-' buttons to adjust the flash power output. The power level indicators will show the current setting, ranging from 1/1 (full power) down to 1/64.

• Peze '+' to increase power (e.g., from 1/64 to 1/32).
• Peze '-' to decrease power (e.g., from 1/1 to 1/2).

6.3 Using Optical Slave Modes (S1/S2)

The F30 flash features S1 and S2 optical slave modes for off-camera triggering. These modes allow the F30 to fire in sync with another flash unit.

• S1 mòd: The flash will fire when it detects the first flash burst from a master flash. This is suitable for manual flash systems.
• S2 mòd: The flash will ignore the pre-flash (if any) from a master flash and fire on the second flash burst. This is suitable for TTL flash systems that emit a pre-flash.

To activate S1 or S2 mode, ensure the flash is powered on and then press the appropriate button (S1 or S2) on the top panel. The corresponding indicator will light up.

6.4 Nòt sou konpatibilite

This flash is compatible with Sony ZV1, ZV-E10, Ricoh GR3, Nikon, Canon, Fuji, Digital Film Cameras, and DSLR Cameras. It is NOT compatible with Sony ZV-1F.

7. Antretyen

7.1 Netwayaj

To clean the flash unit, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface or internal components.

7.2 Depo

When not in use for an extended period, store the flash unit in a cool, dry place. Remove the 9V battery to prevent leakage and potential damage to the flash.

NAN. Depanaj

9. Espesifikasyon

• Modèl: F30
• Nimewo Gid (GN): 15
• Nivo pouvwa: 7 (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64)
• Flash senkronize vitès: 1/500s
• Kalite Flash Kamera: Hotshoe
• Batri: 1 x 9V batri (enkli)
• Pwa atik: 3.52 ons (apeprè 100g)
• Dimansyon pake: 3.94 x 3.94 x 0.79 pous (10 x 10 x 2 cm)
• Montaj konpatib: Sony ZV1, ZV-E10, Ricoh GR3, Nikon, Canon, Fuji, Digital Film Cameras, DSLR Cameras (Not Compatible for Sony ZV-1F)
• Manifakti: Zhuhai jingjia technology co.,ltd

10. Garanti & Sipò

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.