ZIBOO FT-1000W Solar Panel Tester MPPT Meter Instruction Manual

1. Entwodiksyon

The ZIBOO FT-1000W Solar Panel Tester MPPT Meter is a professional-grade device designed for evaluating the performance of photovoltaic (PV) modules. It accurately measures maximum power (Pmax), open-circuit voltage (Voc), and short-circuit current (Isc), making it an essential tool for R&D, manufacturing, and field maintenance of solar systems.

1.1. Pake kontni

Lè w ap ouvri pake a, asire w ke tout bagay sa yo la:

• 1x ZIBOO FT-1000W Solar Panel Tester MPPT Meter
• 1x Special Test Lead (MC4 connectors)
• 1x manyèl itilizatè
• 1x Pote Étui
• 1x senti
• 2x Special Interface Wrench Tools

Figure 1: All items included in the ZIBOO FT-1000W package.

2. Karakteristik kle

• Professional-Grade PV Testing: Measures maximum power (Pmax) up to 1000W, open-circuit voltage (Voc: 12-80V), and short-circuit current (Isc: 35A) with ±0.8% accuracy.
• MPPT Efficiency Optimization: Tracks Vmp (80V) & Amp (35A) in real-time to identify panel degradation or shading issues.
• Industrial Safety & Durability: Rated CAT III 1000V/CAT IV 600V with double-insulated probes, meeting IEC/EN 61010 standards.
• Smart Data Management: Features data hold and a backlit LCD for reading values in various environments.
• Konsepsyon itilizatè-zanmitay: Auto-ranging simplifies operation, while IP54 dust/water resistance and low-power auto-off ensure reliability.

Figi 2: Plis paseview of the ZIBOO FT-1000W's operational features.

Figure 3: Detailed display of test parameters on the ZIBOO FT-1000W.

3. Espesifikasyon teknik

Figure 4: Product dimensions of the ZIBOO FT-1000W.

Figure 5: Comparison of FT-1000W and FT-2000W models.

4. Enstalasyon

4.1. Enstalasyon batri

1. Jwenn konpatiman pil la sou dèyè mèt la.
2. Sèvi ak yon ti tournevis pou ouvri kouvèti batri a.
3. Mete 3 pil AAA, asire w polarite ki kòrèk la (+/-).
4. Ranplase kouvèti batri a epi an sekirite li ak vis la.

4.2. Konekte fil tès yo

The ZIBOO FT-1000W comes with special MC4 test leads for direct connection to solar panels.

1. Connect the red test lead to the positive (+) input terminal on the meter.
2. Connect the black test lead to the negative (-) input terminal on the meter.
3. Ensure the MC4 connectors on the test leads are securely attached to the corresponding connectors on your solar panel or array.

Figure 6: Standard MC4 Test Leads included with the meter.

Figure 7: Special Interface Wrench Tools for MC4 connectors.

5. Operasyon Enstriksyon

5.1. Power On/Off

• Pou limen: Peze epi kenbe bouton pouvwa a (U) for approximately 3 seconds.
• To power off: Press and hold the power button (U) for approximately 2 seconds. The device also features an auto-off function to conserve battery.

5.2. Measurement Modes (Manual/Auto)

The meter offers two measurement modes:

• Mòd oto: Peze a OTO button. The meter will automatically scan and display the PV module's parameters (Pmax, Vmp, Amp, Voc, Isc) every few seconds. This mode is ideal for quick, continuous monitoring.
• Mòd manyèl: Peze a MANYÈL button. In this mode, each press of the button initiates a single measurement cycle. Wait for approximately 3 seconds after pressing to allow the measurement to complete and display.

5.3. Fonksyon Kenbe Done

To freeze the current readings on the display, press the H button. Press it again to release the data hold and resume live readings.

5.4. Aktivasyon ekleraj dèyè

For improved visibility in low-light conditions, press and hold the backlight button (H*) to activate the display backlight. Press and hold again to turn it off.

Figure 8: ZIBOO FT-1000W in operation, displaying real-time solar panel data.

Figi 9: Devan view of the ZIBOO FT-1000W meter with accessories.

6. Antretyen

• Netwayaj: Use a soft, dry cloth to clean the meter's exterior. Do not use abrasive cleaners or solvents.
• Depo: Store the meter and its accessories in the provided carrying pouch in a cool, dry place away from direct sunlight and extreme temperatures.
• Ranplasman batri: Replace batteries promptly when the low battery indicator appears to ensure accurate readings and prevent damage.
• Enspeksyon: Regularly inspect test leads and connectors for any signs of wear or damage. Replace damaged components immediately to ensure safety and performance.

NAN. Depanaj

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official ZIBOO websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.