TOMZN TOVPD3-63VA Din Rail 3 Phase VoltagManyèl Itilizatè Relè Pwotektè e

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of the TOMZN TOVPD3-63VA Din Rail 3 Phase Adjustable Over and Under Voltage Protector Relay with Current Protection. This device is designed to safeguard electrical equipment from voltage fluctuations and overcurrent conditions in three-phase systems.

Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the device or connected equipment.

Figi 1: Devan view of the TOMZN TOVPD3-63VA Din Rail 3 Phase Voltage Protector Relay.

2. Enfòmasyon sou Sekirite

AVÈTISMAN: Danje chòk elektrik. Se sèlman pèsonèl kalifye ki dwe fè enstalasyon ak antretyen.

• Toujou dekonekte kouran an anvan ou enstale oswa fè antretyen sou aparèy la.
• Asire w tout koneksyon fil yo byen fèm epi konfòm ak kòd elektrik lokal yo.
• Pa opere aparèy la nan mouye oswa damp kondisyon yo.
• Verifye voltage and current ratings of your system match the device specifications.
• Never attempt to open or repair the device yourself. Refer to qualified service personnel.

3. Karakteristik kle

The TOMZN TOVPD3-63VA offers robust protection and monitoring capabilities:

• Instant Fault Response: Detects and reacts to electrical abnormalities within milliseconds to prevent equipment damage.
• Sistèm Multi-Pwoteksyon: Comprehensive coverage against overcurrent, under-voltage, phase loss, and short circuits.
• Industrial-Grade Durability: Heavy-duty construction with flame-retardant materials for demanding environments.
• Inivèsèl konpatibilite: Works with AC/DC systems, motors, transformers, and power distribution panels.
• Clear Visual Indicators: LED status lights and fault alarms for quick system diagnostics.
• Volim twòp reglabltage, anba-voltage, and over-current protection thresholds.
• Asymmetry and phase sequence protection.
• Adjustable active time and reconnect time.
• Manyèl voltage and current calibration capability.

4. Variants pwodwi

The TOVPD3 series is available in several configurations to suit different electrical systems. The primary differences lie in the current rating and the presence of a neutral (N) connection, which affects the voltage display and wiring:

• 63A With N (3X120V/3X220V/3X230V): Designed for 3-phase systems with a neutral line. Each phase voltage (L1, L2, L3) is displayed relative to the neutral. For example, in a 3*220V+N system, each phase will display 220V.
• 63A without N (380V): Designed for 3-phase systems without a neutral line. The device displays the line-to-line voltage for each phase (e.g., L1-L2, L2-L3, L3-L1), typically showing 380V across all phases.
• 100A With N (3X220V): Similar to the 63A With N variant but with a higher current capacity.
• 100A without N (380V): Similar to the 63A without N variant but with a higher current capacity.

Ensure you select the correct variant for your specific electrical installation.

5. Components and Display

The device features a clear digital display and intuitive control buttons for monitoring and configuration.

Figure 2: Labeled components and display of the TOMZN TOVPD3-63VA.

5.1 Ekspozisyon Ekran

• Voltage Display Screen (V): Montre vol latage for each phase (L1, L2, L3).
• Current Display Screen (A): Shows the current for each phase (L1, L2, L3).

5.2 Bouton ak Endikatè Kontwòl

• Manual Switch (Power Button): Used to manually turn the output on or off.
• SET (Menu Key): Enters the setting menu and confirms selections.
• Adjustment Keys (Up/Down Arrows): Used to navigate menu options and adjust parameter values.
• Endikasyon pwodiksyon: LED indicator for output status.
• Sou-voltage Indication (>U): LED indicator illuminates when an over-voltagkondisyon an detekte.
• Anba-voltage Indication (<U): LED indicator illuminates when an under-voltagkondisyon an detekte.
• Over-current Indication (>I): LED indicator illuminates when an over-current condition is detected.
• Asymmetry Indication (Asy): LED indicator illuminates when phase asymmetry is detected.

6. Enstalasyon

6.1 Montaj

The TOMZN TOVPD3-63VA is designed for Din Rail mounting. Ensure the Din Rail is securely installed in an appropriate electrical enclosure, away from moisture and excessive heat.

6.2 fil elektrik

IMPORTANT: Disconnect all power before proceeding with wiring.

1. Identify the input (IN) and output (OUT) terminals on the device. The terminals are typically labeled L1, L2, L3, and N (if applicable).
2. Connect the incoming three-phase power supply to the 'IN' terminals (L1, L2, L3). If your model includes a neutral connection, connect the neutral line to the 'N' terminal.
3. Connect the load (equipment to be protected) to the 'OUT' terminals (L1, L2, L3). If your model includes a neutral connection, connect the load's neutral line to the 'N' output terminal.
4. Ensure all connections are tight and secure to prevent loose contacts, which can cause overheating or malfunction.
5. Double-check all wiring against your system's electrical diagram and local codes before restoring power.

Figi 3: Anwo-anba view illustrating the input and output terminals for wiring.

7. Operasyon

7.1 Premye pouvwa-up

1. After completing the wiring, restore power to the circuit.
2. The device display will illuminate, showing the current voltage and current readings for each phase.
3. The device will perform a self-check and, if no faults are detected, will connect the output after the configured reconnect time.

7.2 Anviwònman Paramèt

Pou ajiste paramèt pwoteksyon yo:

1. Peze epi kenbe la SET button for a few seconds to enter the setting menu.
2. Sèvi ak la Up epi Desann adjustment keys to navigate through the parameters (e.g., Over-voltage threshold, Under-voltage threshold, Over-current threshold, Active time, Reconnect time, Asymmetry threshold, Phase sequence protection enable/disable).
3. Peze SET again to select a parameter for adjustment.
4. Sèvi ak la Up epi Desann kle pou chanje valè a.
5. Peze SET to confirm the new value and move to the next parameter or exit the menu.
6. If no buttons are pressed for a certain period, the device will automatically exit the setting menu and save changes.

7.3 Kalibrasyon manyèl

The device supports manual calibration of voltage and current readings for enhanced accuracy. Refer to the device's on-screen menu for specific calibration steps, typically involving comparing readings with a known accurate meter and adjusting the device's internal values.

8. Antretyen

The TOMZN TOVPD3-63VA is designed for minimal maintenance. However, periodic checks are recommended:

• Enspeksyon vizyèl: Enspekte aparèy la regilyèman pou nenpòt siy domaj fizik, dekolorasyon, oswa koneksyon ki lach.
• Netwayaj: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use solvents or abrasive cleaners.
• Tcheke fonksyonalite: Periodically verify the device's protection functions by simulating fault conditions (if safely possible and recommended by a qualified electrician) or by observing its normal operation.

NAN. Depanaj

If you encounter issues with your TOMZN TOVPD3-63VA, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified electrician or the product manufacturer for assistance.

10. Espesifikasyon

11. Garanti ak sipò

This product is manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. In case of technical issues or questions not covered in this manual, please reach out to the product manufacturer or your supplier for support.