Baybee Booster Car Seat Instruction Manual

1. Entwodiksyon

This manual provides essential information for the safe and correct use of your Baybee Booster Car Seat, Model BS02. This booster seat is designed for children aged 3 to 12 years, weighing between 15 kg and 36 kg, and with a height of 100 cm to 150 cm. Please read all instructions carefully before installation and use to ensure your child's safety.

2. Enfòmasyon sou Sekirite

Sekirite pitit ou a se bagay ki pi enpòtan. Toujou respekte direktiv sa yo:

• Limit Laj ak Pwa: This booster seat is suitable for children aged 3 to 12 years, weighing 15-36 kg. Ensure your child meets these requirements.
• Enstalasyon apwopriye: Always install the booster seat securely using the vehicle's 3-point seat belt system. Refer to the 'Setup and Installation' section for detailed instructions.
• Seat Belt Positioning: The vehicle's lap belt must fit low across your child's hips, touching the upper thighs. The shoulder belt must rest across the middle of your child's shoulder and chest, not on the neck or face. Use the integrated belt guide to ensure correct positioning.
• Forward-Facing Use Only: This booster seat is designed for forward-facing use only.
• Konpatibilite machin: Ensure your vehicle's seating position is suitable for a booster seat and has a 3-point seat belt.
• Pa janm kite san siveyans: Never leave your child unattended in the booster seat, even for short periods.
• Damaged Seats: Do not use the booster seat if it has been involved in an accident or shows signs of damage. Replace it immediately.

Image: Baybee Booster Car Seat, designed for children aged 3-12 years.

3. Pwodwi Features

The Baybee Booster Car Seat is designed for comfort and safety, featuring:

• Konsepsyon kontra enfòmèl ant ak lejè: Facilitates easy transfer between vehicles.
• Twal mou, rèspirant: Ensures a comfortable ride for your child.
• Konsepsyon ergonomique: Provides uniform weight distribution and a wide, cushioned seat for stability and comfort.
• Integrated Seat Belt Guide: Helps position the vehicle's seat belt correctly over your child.
• Akoudwa Sipò: Reduces arm fatigue during longer journeys.
• Kouvèti detachable ak lave: Pou fasil netwayaj ak antretyen.

Image: Illustration of the booster seat's ultra-soft fabric for comfort.

Image: Diagram illustrating the ergonomic and comfortable design for even weight distribution.

Image: Close-up showing supportive armrests and the removable, washable cover.

4. Enstalasyon ak Enstalasyon

Follow these steps to correctly install the Baybee Booster Car Seat in your vehicle:

1. Position the Booster Seat: Place the booster seat firmly on the vehicle's seat, ensuring it is flat and stable. The booster seat should be placed in a seating position equipped with a 3-point lap and shoulder belt.
2. Seat Your Child: Have your child sit comfortably on the booster seat, ensuring their back is against the vehicle's seat back.
3. Route the Lap Belt: Pull the vehicle's lap belt across your child's lap. Ensure the lap belt passes under both armrests of the booster seat and lies low across your child's hips, touching the upper thighs.
4. Route the Shoulder Belt: Pull the vehicle's shoulder belt across your child's chest. Thread the shoulder belt through the red belt guide located on the side of the booster seat, near your child's shoulder. The shoulder belt should rest across the middle of your child's shoulder and chest, not on the neck or face.
5. Buckle and Tighten: Insert the seat belt buckle into the vehicle's receptacle until it clicks. Pull the shoulder belt upwards to remove any slack from both the lap and shoulder portions of the belt, ensuring a snug fit.
6. Tcheke pou sekirite: Verify that the booster seat and your child are securely restrained by the vehicle's seat belt. The booster seat should not move excessively from side to side.

Image: A child being secured in the booster car seat using the vehicle's seat belt, demonstrating proper belt positioning.

5. Operasyon Enstriksyon

Once the booster seat is installed, follow these steps for daily use:

1. Seating the Child: Ensure your child sits upright with their back against the vehicle's seat and the booster seat.
2. Sekirize timoun nan: Always use the vehicle's 3-point lap and shoulder belt to secure your child. Ensure the lap belt is low on the hips and the shoulder belt is across the chest and shoulder, guided by the red belt guide.
3. Tcheke anfòm: Before every journey, double-check that the seat belt is properly routed and snug against your child. There should be no slack in the belt.
4. Armrest Use: Encourage your child to use the armrests for added comfort during the ride.

6. Antretyen

Regular maintenance ensures the longevity and hygiene of your booster seat:

• Cleaning the Fabric Cover: The fabric cover is removable and washable. Refer to the care label on the cover for specific washing instructions. Typically, it can be hand-washed with mild soap and cold water, then air-dried. Do not bleach or tumble dry.
• Cleaning the Plastic Shell: Wipe the plastic parts of the booster seat with a damp twal ak savon modere. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
• Enspeksyon: Periodically inspect the booster seat for any signs of wear, damage, or loose parts. If any damage is found, discontinue use and contact customer support.
• Depo: When not in use, store the booster seat in a cool, dry place away from direct sunlight.

Image: The booster seat highlighting its dimensions and the feature of a removable and washable cover.

NAN. Depanaj

If you encounter issues with your Baybee Booster Car Seat, consider the following:

• Booster Seat Feels Loose: Ensure the vehicle's seat belt is pulled taut and all slack is removed. Re-check the belt routing through the armrests and shoulder guide.
• Seat Belt Not Fitting Correctly: Verify that your child meets the age, weight, and height requirements for the booster seat. Adjust the shoulder belt guide to ensure the belt rests properly across the shoulder and chest.
• Child Discomfort: Ensure the child is seated correctly with their back against the vehicle seat. Check for any objects under the booster seat that might cause unevenness.
• Difficulty Removing Cover: Refer to the 'Maintenance' section for instructions on how to remove the fabric cover for washing.
• Pati ki manke: If any parts are missing upon unboxing, do not use the product. Contact customer support immediately.

If problems persist, please contact Baybee customer support.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, product support, or any queries regarding your Baybee Booster Car Seat, please contact Galaxy Incorporation, the manufacturer and importer.

• Imèl: care@baybee.co.in
• WhatsApp: 8939028239/7520444000

Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.