Manyèl Itilizatè Scooter Elektrik TODIMART T3 la

1. Entwodiksyon

This manual provides essential instructions for the safe operation, assembly, and maintenance of your TODIMART T3 Electric Scooter. Please read it thoroughly before your first ride to ensure proper usage and to maximize the lifespan of your scooter. The TODIMART T3 features a powerful 350W motor, a range of 30-35 km, a top speed of 25 km/h, app control, 8.5-inch solid tires, and a convenient foldable design.

Image 1.1: The TODIMART T3 Electric Scooter, showcasing its sleek design and integrated lights.

2. Enfòmasyon sou Sekirite

Sekirite ou pi enpòtan. Toujou respekte direktiv sa yo:

• Always wear a helmet and appropriate protective gear (knee pads, elbow pads) while riding.
• Familiarize yourself with and obey all local traffic laws and regulations regarding electric scooters.
• Perform a pre-ride check: ensure brakes are functional, lights are working, and tires are in good condition.
• Do not ride in heavy rain, on slippery surfaces, or in extreme weather conditions.
• Avoid riding with passengers. The maximum load capacity is 120 kg.
• Kenbe yon distans ki an sekirite ak lòt machin ak pyeton.
• Pa fè kaskad oswa manèv danjere.
• Children under 12 years old should not operate the scooter. Adult supervision is recommended for riders aged 12-16.

3. Pake kontni

Lè w ap ouvri pake a, tanpri verifye si tout bagay sa yo ladan l:

• TODIMART T3 Electric Scooter
• Batri Charger
• Manyèl Itilizatè (dokiman sa a)
• Zouti Asanble
• Head Fastening Screws

Si nenpòt atik ki manke oswa ki domaje, tanpri kontakte sipò kliyan imedyatman.

4. Enstalasyon ak Asanble

Your TODIMART T3 Electric Scooter requires minimal assembly to get you started. Follow these steps:

1. Depliye Scooter a: Leve tij gidon an avèk prekosyon jiskaske li bloke nan pozisyon dwat la. Asire w ke mekanis pliye a byen tache.
2. Attach Handlebar Components: If necessary, attach the handlebar grips, bell, and brake levers. Use the provided tools and fastening screws to secure them firmly.
3. Inisyal chaj: Before your first ride, fully charge the scooter's battery. Refer to Section 6 for detailed charging instructions.
4. Verifikasyon Anvan Wout la: Before each use, inspect the brakes, lights, and tires for proper function and condition.

Image 4.1: The TODIMART T3 Electric Scooter in its folded state, ready for transport.

5. Operasyon Enstriksyon

5.1 Power On/Off

To turn the scooter on, press and hold the power button on the display until the screen illuminates. To turn it koupe, press and hold the power button again until the display turns off.

5.2 Driving Modes

The TODIMART T3 offers multiple driving modes to suit your preference and riding conditions. While the scooter is on, press the power button once to cycle through the available modes:

• Mòd ECO: For maximum battery efficiency and a smoother, slower ride.
• Mòd estanda: Yon mòd transpò ekilibre pou transpò chak jou.
• Mòd espò: Provides maximum power and speed for dynamic riding.

Image 5.1: A rider demonstrating the TODIMART T3 Electric Scooter in use, highlighting its performance capabilities.

5.3 Kontwòl App

Enhance your riding experience by connecting your TODIMART T3 to the dedicated mobile application via Bluetooth. The app provides additional functionalities:

• Remote anti-theft locking
• Customizable speed mode selection
• Control over lighting system
• Aktivasyon kontwòl kwazyè
• Real-time scooter status display (speed, battery level, mileage)

Image 5.2: The scooter's display and mobile app interface for control and monitoring.

5.4 Lights and Horn

The scooter is equipped with a bright front headlight, a rear brake light, and turn signals to ensure visibility and safety, especially during night rides. Use the integrated horn to alert others when necessary.

Image 5.3: Close-up of the scooter's front headlight for improved visibility.

Image 5.4: The scooter's rear brake light, enhancing safety during braking.

5.5 Sistèm frenaj

The TODIMART T3 features a reliable dual braking system for effective stopping power. It includes both a drum brake and an EABS anti-lock brake on the rear wheel, ensuring a safe and controlled stop.

5.6 Folding and Transport

The scooter's foldable design allows for easy storage and transport. To fold, locate the folding mechanism at the base of the handlebar stem, release the latch, and fold the stem downwards until it locks into place. The lightweight aluminum frame (12 kg) makes it convenient to carry or store in a car trunk.

Image 5.5: The folded scooter easily fits into a car trunk for convenient transport.

6. Chaje

To charge your TODIMART T3 Electric Scooter:

1. Asire w ke scooter a etenn.
2. Jwenn pò a chaje sou scooter la.
3. Konekte kab plato a nan pò a chaje.
4. Ploge plato a nan yon priz kouran estanda.
5. Limyè endikatè ki sou plato a ap anjeneral parèt wouj pandan chaj la epi li vin vèt lè li konplètman chaje.
6. A full charge usually takes approximately 5-6 hours. Do not overcharge the battery.

Image 6.1: Illustration of the scooter's battery compartment and charging time.

7. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal scooter ou a:

• Kawotchou: The 8.5-inch honeycomb solid tires are designed to be puncture-proof and require no inflation. Regularly inspect them for any signs of wear, cracks, or damage.
• Netwayaj: Clean the scooter regularly with a soft, damp cloth. Avoid using high-pressure water jets, abrasive cleaners, or harsh chemicals, as these can damage electronic components or the finish.
• Fren: Periodically check the brake levers and cables for proper tension and responsiveness. If you notice any degradation in braking performance, have it inspected by a qualified technician.
• Depo: When not in use for extended periods, store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, ensure the battery is charged to approximately 50% to preserve its health.
• Fastener: Periodically check all screws and bolts to ensure they are tight and secure.

Image 7.1: Close-up of the 8.5-inch honeycomb solid tires, designed for a smooth and puncture-free ride.

NAN. Depanaj

If you encounter any issues with your TODIMART T3 Electric Scooter, please refer to the following common troubleshooting steps:

• Scooter a pa limen: Check if the battery has sufficient charge. Ensure the power button is pressed and held correctly.
• Rediksyon nan distans oswa vitès: Verify that the battery is fully charged. Consider factors like rider weight, terrain (steep inclines), and ambient temperature, which can affect performance. Ensure you are not in ECO mode if you desire higher speed.
• Pwoblèm koneksyon aplikasyon an: Make sure Bluetooth is enabled on your mobile device and the scooter is powered on. Try restarting both the app and the scooter. Ensure the app is updated to the latest version.
• Fren yo pa reponn: Check the brake levers and cables for any obstructions or damage. If the issue persists, do not ride the scooter and contact customer support.

For issues not covered here or if problems persist, please contact TODIMART customer support.

9. Espesifikasyon

10. Garanti ak sipò

Your TODIMART T3 Electric Scooter is covered by a 1-ane garanti bon jan kalite apati dat acha a. Garanti sa a kouvri domaj fabrikasyon nan kondisyon itilizasyon nòmal.

For any questions, technical assistance, troubleshooting not covered in this manual, or to make a warranty claim, please contact TODIMART customer service. Our dedicated support team is available to assist you.

Tanpri konsève prèv acha ou a pou validasyon garanti a.