Entwodiksyon
The Generic Compact 500 Lumen Hands-Free Work Light is a versatile lighting tool designed for various tasks. It features 500 lumens of bright LED light, a 180-degree rotating handle, and a strong magnetic base for hands-free operation. This manual provides instructions for its safe and effective use, ensuring optimal performance and longevity of your work light.
Kontni pake
- Compact 500 Lumen Hands-Free Work Light (4 units)
- Manyèl Itilizatè (dokiman sa a)
Note: 4 AA batteries per light are required and are not included in the package.
Enfòmasyon sou Sekirite
Tanpri li epi konprann tout enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv enstriksyon sa yo, sa ka lakòz chòk elektrik, dife, oswa blesi grav.
- Kenbe pwodui sa a lwen timoun yo.
- Do not stare directly into the LED light beam. It can cause temporary vision impairment.
- Pa melanje ansyen ak nouvo pil.
- Pa melanje pil alkalin, estanda (kabòn-zenk), oswa rechargeable (nikèl-kadmyòm).
- Remove batteries if the light will not be used for an extended period to prevent leakage.
- Jete pil itilize yo byen selon règleman lokal yo.
- Do not attempt to disassemble or modify the work light. There are no user-serviceable parts inside.
- Do not expose the light to extreme temperatures or direct sunlight for prolonged periods.
Enstalasyon: Enstalasyon batri
Your work light requires 4 AA batteries (not included) for operation.
- Locate the battery compartment on the back of the work light.
- Gently slide or unclip the battery compartment cover to open it.
- Insert 4 AA batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely until it clicks into place or is firmly seated.
Imaj: Dèyè view of the work light, highlighting the battery compartment and power button for easy identification during battery installation.
Enstriksyon Operasyon
Once batteries are installed, your work light is ready for use.
- Mòd pou limen/etenn ak limyè: Press the power button, located on the back of the light, to cycle through the available lighting modes:
- Premye laprès: Activates Normal brightness mode.
- Dezyèm laprès: Activates High brightness mode (500 Lumens).
- Twazyèm laprès: Activates Low brightness mode.
- Katriyèm laprès: Turns the light OFF.
- Mounting mayetik: Utilize the strong magnet located on the back of the light to attach it to any ferrous metal surface. This allows for convenient hands-free illumination in various work environments.
- Manch reglabl: The integrated handle can rotate 180 degrees. Adjust the handle to direct the light beam precisely where it is needed, providing optimal visibility for your task.
Imaj: Devan view of the work light, showcasing the LED panel and the adjustable handle in an upright position.
Antretyen
Proper maintenance ensures the longevity and optimal performance of your work light.
- Netwayaj: Clean the exterior of the work light with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
- Swen batri: Always remove depleted batteries promptly. If the light will not be used for an extended period (e.g., more than one month), remove the batteries to prevent potential leakage and corrosion.
- Depo: Store the work light in a cool, dry place, away from direct sunlight and extreme temperatures.
Depanaj
If you encounter issues with your work light, refer to the following common problems and solutions:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Depleted or incorrectly inserted batteries. | Check battery polarity and replace with fresh AA batteries. Ensure battery compartment is closed securely. |
| Limyè a fèb oswa li ap tranble. | Ba pouvwa batri. | Ranplase tout 4 pil AA yo ak pil nèf. |
| Magnetic mount is not holding. | Surface is not ferrous metal or is too thin/uneven. | Ensure the mounting surface is clean, flat, and made of a magnetic material. |
Espesifikasyon
| Nimewo Modèl | V42184012000 |
| Mak | Jenerik |
| Klète | 500 Lumèn (Mòd Segondè) |
| Kalite sous limyè | dirije |
| Sous pouvwa | 4x AA pil (pa enkli) |
| Materyèl | Aliminyòm |
| Kalite aliye | Mayetik |
| Dimansyon pwodwi | 5.33"L x 3.87"L x 1.5"H |
| Karakteristik espesyal | Durable, 180° Rotating Handle |
| Manifakti | BrightEase |
Enfòmasyon sou Garanti
This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For specific warranty details, including duration and coverage, refer to the product packaging or contact the manufacturer directly. The warranty typically covers defects in materials and workmanship under normal use.
Sipò pou Kliyan
For technical assistance, product inquiries, or to report any issues not covered in the troubleshooting section, please refer to the contact information provided on the product packaging or the manufacturer's official website. When contacting support, please have your product model number (V42184012000) and proof of purchase readily available.