WILLED B0F4DHT8F6

WILLED Motion Sensor Under Cabinet Lights - Instruction Manual

Model: B0F4DHT8F6

Entwodiksyon

Thank you for choosing WILLED Motion Sensor Under Cabinet Lights. This manual provides essential information for the safe and efficient use of your new LED light bars. Please read these instructions thoroughly before installation and operation.

Ki sa ki nan bwat la

Pake ou a ta dwe genyen atik sa yo:

  • 2 x Anba limyè kabinè
  • 2 x USB C Charging Cables
  • 2 x Adhesive Iron Sheets
  • 1 x manyèl enstriksyon

Enstalasyon

Inisyal chaje

For optimal performance, please fully charge the lights before first use. Connect the provided USB-C charging cable to the light and a 5V compliant charger or mobile power bank. The battery level display will show charging progress.

Videyo: Demonstrates the charging process and battery level display of the WILLED Under Cabinet Lights.

Enstalasyon

The WILLED Under Cabinet Lights offer versatile, tool-free installation:

  1. Montaj mayetik: The lights have built-in strong magnets. If your desired surface is metallic (e.g., a refrigerator), simply attach the light directly.
  2. Montaj adezif: For non-metal surfaces (e.g., wood cabinets, walls), use the included adhesive iron sheets. Clean the surface thoroughly, peel off the protective film from the adhesive iron sheet, stick it firmly onto the desired location, and then magnetically attach the light bar to the iron sheet.
Image showing wireless under cabinet lighting installation

Imaj: Illustration of wireless under cabinet lighting installation using magnetic and adhesive methods.

Ide cho:

  • Do not install two motion sensor lights too close to each other, as the brightness of one may prevent the other from lighting up.
  • Installing the light close to the edge of a surface can enhance motion detection sensitivity.

Enstriksyon Operasyon

The light bar features multiple buttons for control:

  • Bouton pouvwa: Limen limyè a ON/OFF.
  • Ajisteman klète: Cycles through five dimming levels (10%, 30%, 50%, 70%, 100%).
  • Ajisteman Tanperati Koulè: Cycles through three color temperatures: Warm White (3000K), Natural Light (4500K), and Cool White (6000K).
  • Bouton mòd oto: Activates the motion sensor mode.

Mòd Operasyon Doub

  • Motion-Sensing Mode (Auto Mode): When activated, the light turns on automatically in low-light conditions when human movement is detected within a 10 ft range and 120° angle. It will auto-off after 20 seconds if no further movement is detected. This mode is energy-saving.
  • Mòd toujou sou: Provides continuous lighting for your needs.
Image showing motion sensor light indoor

Imaj: Visual representation of the motion sensor light in an indoor setting.

Klate ak Tanperati Koulè

Adjust the brightness and color temperature to suit your environment and preference. The light offers 200 lumens of soft, glare-free illumination.

Videyo: Demonstrates the motion sensor functionality and various brightness/color temperature settings of the WILLED lights.

Antretyen

Netwayaj

Wipe the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

Swen batri

The 1800mAh rechargeable battery provides reliable, cord-free lighting. A full charge takes approximately 1.5 hours. Battery life varies by mode and brightness:

  • Up to 5 hours at maximum brightness (Always-On mode).
  • Up to 40 hours at minimum brightness (Always-On mode).
  • Extended duration in motion-sensing mode due to intermittent use.

The convenient battery level display helps you monitor the charge status.

Depanaj

PwoblèmKòz posibSolisyon
Light does not turn on in motion-sensing mode.Sufficient ambient light; motion sensor blocked; low battery.Ensure the environment is dark enough; check if the motion sensor cover is clear; charge the battery.
Limyè pa chaje.Charging cable or adapter issue; light not properly connected.Use a 5V compliant charger; ensure the USB-C cable is securely connected.
Motion sensor is too sensitive or not sensitive enough.Placement of the light.Adjust the light's position. Installing it closer to an edge can enhance sensitivity.

Espesifikasyon

  • Mak: VLE
  • Nimewo Modèl: B0F4DHT8F6
  • Koulè: Nwa
  • Materyèl: Plastik
  • Sous pouvwa: Batri Powered (Rechargeable)
  • Kapasite batri: 1800mAh
  • Chaje Voltage: 5V (DC)
  • Sous limyè: LED (64 LED beads)
  • Klate: 200 Lumens (Adjustable: 10%-100%)
  • Tanperati koulè: Warm White (3000K), Natural Light (4500K), Cool White (6000K)
  • Motion Sensor Angle: 120°
  • Distans Capteur Mouvman: Jiska 10 pye (3M)
  • Auto-off Time: 20 seconds (in motion-sensing mode)
  • Metòd kontwòl: Pouse bouton / Manyen
  • Kalite montaj: Magnetic, Adhesive
  • Dimansyon atik (L x W x H): 9.84"L x 1.3"L x 0.75"H
  • Nivo rezistans dlo: Pa reziste dlo

Garanti ak sipò

Your WILLED Motion Sensor Under Cabinet Lights are backed by a 12 mwa garanti limite. For any questions, concerns, or support needs, please do not hesitate to reach out to our 24/7 customer support team. Contact information can typically be found on the product packaging or through your purchase platform.

© 2026 WILLED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.