Maxxima MEL-S1013100W LED Outdoor Flood Wall Light Instruction Manual

1. Enfòmasyon sou Sekirite

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Toujou koupe kouran an nan disjonktè a anvan enstalasyon oswa antretyen.
• Konsilte yon elektrisyen kalifye si ou pa sèten sou pwosesis enstalasyon an.
• Asire w ke tout koneksyon elektrik yo byen fèm epi yo konfòm ak kòd ak òdonans lokal yo.
• Do not install on a dimmer switch.
• Aparèy sa a klase pou itilizasyon deyò epi li reziste dlo.

2. Pake kontni

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an.

• LED Outdoor Flood Wall Light (1 unit)
• Mounting Hardware (screws, wire connectors)
• Joint
• Manyèl Enstriksyon

Figure 2.1: Product components and adjustable parts.

3. Pwodwi Features

The Maxxima LED Outdoor Flood Wall Light is designed for reliable outdoor security and illumination.

• Pwisan Ekleraj: Delivers 950 lumens of 3000K warm white light with an energy-efficient 13W design.
• Deteksyon mouvman avanse: PIR motion sensor with up to a 70 ft range.
• Adjustable Timers: Choose from 1, 5, or 10 minutes for how long the light stays on after motion detection.
• Capteur solèy leve a: Photocell sensor automatically operates at night and conserves energy during the day.
• Tèt reglabl: Easily direct the light beam with a 180° vertical tilt.
• Adjustable Arm and Sensor: 90° vertical arm tilt and 180° vertical tilt & horizontal swivel for the motion sensor, with 360° sensor rotation.
• Konstriksyon dirab: Built with aluminum, rated for 50,000 lifetime hours, ETL listed.

4. Enstalasyon

4.1 Monte aparèy la

1. Fèmen kouran nan disjoncteurs a anvan ou kòmanse enstalasyon.
2. Remove the existing fixture (if any) and disconnect wiring.
3. Attach the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a weather-tight seal.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

4.2 Koneksyon fil elektrik

Konekte fil yo jan sa a:

• Konekte a Nwa fil soti nan aparèy la rive nan la Nwa (Live/Hot) wire from the junction box.
• Konekte a Blan fil soti nan aparèy la rive nan la Blan (Neutral) wire from the junction box.
• Konekte a Vèt (Ground) wire from the fixture to the Vèt or bare copper (Ground) wire from the junction box.
• Konekte tout koneksyon yo byen sere ak konektè fil yo bay la.

Figure 4.1: Wiring connections for the flood light.

4.3 Final Asanble

1. Ak anpil atansyon mete tout fil nan bwat junction la.
2. Aliyen aparèy la ak plak montaj la epi sere l ak vis ki rete yo.
3. Retabli pouvwa nan disjoncteurs a.

Figure 4.2: Installed flood light on an exterior wall.

5. Enstalasyon ak Ajisteman

The flood light features adjustable settings for the motion sensor and timer.

5.1 Adjusting the Sensor and Timer

The sensor unit has two adjustable dials located on its underside:

• TIMER Dial: Controls how long the light stays on after motion is detected. Options include 1 minute, 5 minutes, 10 minutes, or Dusk-to-Dawn (D2D).
• SENSITIVITY Dial: Adjusts the motion detection range. Options include 10 ft, 20 ft, 50 ft, or MAX (up to 70 ft).

To adjust, gently rotate the dials to your desired setting. The 'Test' mode on the TIMER dial allows for quick testing of motion detection during daylight hours.

Figure 5.1: Timer and Sensitivity adjustment dials.

5.2 Adjusting Light Head and Sensor Position

The light head and motion sensor can be adjusted to cover specific areas:

• The light head can be tilted up to 180° vertically.
• The arm connecting the sensor to the base can tilt 90° vertically.
• The motion sensor itself can tilt 180° vertically and swivel 180° horizontally, with a full 360° rotation capability.

Figure 5.2: Adjustable light head and motion sensor.

6. Operasyon Enstriksyon

Once installed and configured, the Maxxima LED Outdoor Flood Wall Light operates automatically based on its sensor settings.

• Dusk-to-Dawn Mode (D2D): When the TIMER dial is set to D2D, the light will automatically turn on at dusk and remain on until dawn, regardless of motion.
• Mòd Capteur Mouvman: When the TIMER dial is set to 1, 5, or 10 minutes, the light will activate when motion is detected within the set sensitivity range and ambient light conditions (typically at night). The light will remain on for the selected duration after the last motion is detected, then turn off.
• Mode Egzamen: Setting the TIMER dial to 'Test' allows you to verify motion detection during daylight. The light will turn on for a few seconds when motion is detected, then turn off. This mode is useful for positioning the sensor.

7. Antretyen

This LED flood light requires minimal maintenance.

• Netwayaj: Siye aparèy la detanzantan avèk yon twal mou, damp twal pou retire pousyè tè ak debri. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Enspeksyon: Regularly check for any loose connections or damage to the wiring or housing.
• The integrated LED light source is not user-replaceable.

NAN. Depanaj

If you experience issues with your flood light, refer to the following table for common problems and solutions.

9. Espesifikasyon

10. Garanti

This Maxxima LED Outdoor Flood Wall Light is backed by a 3-ane garanti apati dat acha a. Garanti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Tanpri konsève prèv acha ou pou reklamasyon garanti.

11. Sipò

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer service.

Visit the Maxxima Store: MaxximaLEDLighting on Amazon

Maxxima is an American company with USA-based offices and customer service.