KRUX Empero ATX PC Case User Manual

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your KRUX Empero ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation. The KRUX Empero case is designed to accommodate ATX motherboards and offers extensive cooling options and component compatibility.

Figi 1: Devan view of the KRUX Empero ATX PC Case, showcasing its glass panels and pre-installed ARGB fans.

2. Pwodwi Features

• Four 120mm ARGB PWM Fans: Pre-installed for efficient cooling and customizable lighting.
• ARGB Controller Splitter: Manages fan lighting and synchronization.
• Panno an vè: Front and side tempered glass panels provide an unobstructed view nan konpozan entèn yo.
• Dual Chamber Design: Separates the power supply and storage drives from the main components for improved airflow and aesthetics.
• Liquid Cooler Compatibility: Supports 120mm, 240mm, 280mm, and 360mm liquid cooling radiators.
• Modern Front I/O: Includes a USB-C port, USB 3.0 port, and audio jacks for convenient connectivity.
• Clearance GPU: Accommodates graphics cards up to 420mm in length.

3. Pake kontni

Verifye ke tout konpozan yo prezan nan pake a:

• KRUX Empero ATX PC Case
• 4 x 120mm ARGB PWM Fans (pre-installed)
• ARGB Controller Splitter (pre-installed)
• Bwat akseswa (vis, lyen kab, distansè)
• Manyèl itilizatè

Figi 2: Eksploze view illustrating the various components of the KRUX Empero PC case, including panels, frame, and fans.

4. Enstalasyon ak Enstalasyon

Follow these steps for proper component installation.

4.1 Removing Panels

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case.
2. Remove the front glass panel if necessary for fan or radiator installation.

4.2 Enstalasyon mèr

1. Install the I/O shield into the rear opening of the case.
2. Align your ATX motherboard with the pre-installed standoffs.
3. Secure the motherboard using the provided screws.

4.3 Enstalasyon Power Supply Unit (PSU).

The KRUX Empero features a dual-chamber design. The PSU is installed in the rear chamber.

1. Mount the PSU to the PSU bracket, typically located at the rear bottom of the case.
2. Slide the PSU with its bracket into the designated compartment and secure it with screws.

4.4 Enstalasyon Disk Depo

The case supports multiple storage drives. Refer to the case interior for specific mounting points for 2.5" SSDs and 3.5" HDDs.

1. Secure 2.5" SSDs to the dedicated mounting plates, often found behind the motherboard tray.
2. Install 3.5" HDDs into the drive cages, usually located in the PSU shroud area.

4.5 Enstalasyon Kat Grafik (GPU)

The case supports GPUs up to 420mm in length.

1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
2. Insert the GPU into the appropriate PCIe slot on your motherboard.
3. Fikse GPU a ak vis.

4.6 Enstalasyon Sistèm Refwadisman

The case comes with four 120mm ARGB PWM fans pre-installed. Additional fans or liquid coolers can be added.

• Fanatik: The case supports various fan configurations. Ensure proper airflow direction (intake/exhaust).
• Liquid Coolers: Radiators up to 360mm can be mounted. Consult your liquid cooler's manual for specific installation steps.

Figi 3: Enteryè view of the KRUX Empero case with the side panel removed, highlighting the spacious layout for components and cooling solutions.

4.7 Koneksyon Antre/Sòti Devan

Connect the front panel cables to your motherboard according to your motherboard's manual.

• USB-C: Connect the USB-C header cable to your motherboard's USB 3.2 Gen 2 header.
• USB 3.0: Connect the USB 3.0 header cable to your motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 header cable to your motherboard's USB 2.0 header.
• Odyo HD: Connect the HD Audio cable to your motherboard's audio header.
• Power SW, Reset SW, HDD LED, Power LED: Connect these small connectors to the corresponding pins on your motherboard's front panel header.
• Bouton ki ap dirije: Connect the LED button cable to the ARGB controller for lighting control.

Figure 4: Close-up of the top-front I/O panel, featuring USB-C, USB 3.0, audio ports, and control buttons.

5. Operasyon Enstriksyon

5.1 Limen

Once all components are installed and cables are connected, press the power button on the front I/O panel to start your system.

5.2 ARGB Fan Control

The pre-installed ARGB fans are connected to a controller. Use the dedicated LED button on the front I/O panel to cycle through various lighting modes and colors. For advanced control, connect the controller to your motherboard's ARGB header (if available) and use the motherboard's software.

6. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite bwat PC ou a.

• Filtè Pousyè: The KRUX Empero case includes removable dust filters. Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Panno an vè: Clean tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the surface.
• Netwayaj enteryè: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

NAN. Depanaj

Si ou rankontre pwoblèm pandan oswa apre enstalasyon an, konsidere etap depanaj komen sa yo:

• Pa gen pouvwa: Asire w ke ekipman pou pouvwa a limen, tout kab pouvwa yo (24-pin, 8-pin CPU, GPU PCIe) byen konekte, epi kab switch pouvwa panèl devan an byen tache ak kat manman an.
• Fans Not Spinning/No ARGB: Check fan power connections to the motherboard or controller. Verify ARGB cables are properly connected to the controller and/or motherboard header.
• Pa gen ekspozisyon: Confirm the monitor cable is connected to the graphics card (not the motherboard's integrated graphics port, unless using integrated graphics). Reseat the graphics card and RAM modules.
• Pò USB pa travay: Ensure the front panel USB 3.0 and USB-C cables are correctly connected to the motherboard headers.

8. Espesifikasyon

9. Garanti ak sipò

Specific warranty information for the KRUX Empero ATX PC Case is not provided in this document. For detailed warranty terms, technical support, or further assistance, please refer to the official KRUX websit oswa kontakte revandè ou a.