TOTAL TIDLI20558 Compact Brushless Cordless Impact Drill User Manual

1. Pwodwi souview

The TOTAL TIDLI20558 is a compact brushless cordless impact drill designed for various drilling and fastening applications. It features a powerful 20V motor, delivering up to 55Nm of torque, making it suitable for both professional and DIY tasks. This drill combines durability with an ergonomic design for comfortable and efficient operation.

Figure 1: TOTAL TIDLI20558 Compact Brushless Cordless Impact Drill. This image displays the drill unit with a battery attached, showcasing its compact design and main body.

2. Enstriksyon Sekirite

Toujou obsève prekosyon sekirite debaz yo lè w ap itilize zouti elektrik pou diminye risk dife, chòk elektrik ak aksidan pèsonèl.

• Sekirite Zòn Travay: Kenbe zòn travay ou pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Evite kontak kò ak sifas ki konekte ak tè tankou tiyo, radyatè, recho, ak frijidè. Pa ekspoze zouti elektrik yo anba lapli oswa kondisyon mouye.
• Sekirite Pèsonèl: Always wear eye protection. Use hearing protection when operating the drill for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte pake batri a nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Sekirite nan pake batri: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not incinerate the battery pack even if it is severely damaged.

3. Eleman yo

Familiarize yourself with the main components of your TOTAL TIDLI20558 impact drill:

1. Chuck: Holds drill bits and other accessories.
2. Bag Ajisteman Koupl: Allows selection of desired torque setting for screwdriving.
3. Selektè mòd: Switches between drilling, impact drilling, and screwdriving modes.
4. Chanjman Seleksyon Vitès: Controls the high/low speed range.
5. Chanjman deklanche: Aktive perçage a epi kontwole vitès varyab la.
6. Selektè Avanse/Aryè: Chanje direksyon wotasyon mandrin lan.
7. Limyè travay ki ap dirije: Eklere zòn travay la.
8. Pake batri: Provides power to the drill.
9. Bouton pou libere pil la: Used to detach the battery pack.
10. Manch: Ergonomic grip for user comfort.

4. Enstalasyon

4.1. Enstalasyon ak Chaje Batri

• Chaje: Connect the charger to a power outlet. Slide the battery pack onto the charger until it clicks into place. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
• Enstalasyon: Align the battery pack with the base of the drill handle. Slide the battery pack into the drill until it clicks securely into place. Ensure it is firmly seated before operation.
• Retire: Press the battery release button located on the battery pack and slide the battery out of the drill handle.

4.2. Enstale ak Retire Mòson/Akseswa Perçage yo

• Enstalasyon: Rotate the chuck counter-clockwise to open the jaws. Insert the drill bit or accessory fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit. Ensure the bit is centered and firmly held.
• Retire: Rotate the chuck counter-clockwise to loosen the jaws and remove the drill bit or accessory.

5. Operasyon Enstriksyon

5.1. Limen/Etenn ak Kontwòl Vitès

• Pou limen: Press the trigger switch. The drill speed is variable depending on how far the trigger is pressed.
• Pou etenn: Lage switch la deklanche.
• Seleksyon vitès: Use the speed selector switch (typically on top of the drill) to choose between low speed (for high torque applications like screwdriving) and high speed (for drilling).

5.2. Wotasyon pou pi devan/pou pi devan

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (drilling/tightening) and to the right for reverse rotation (removing screws/backing out bits). Ensure the drill is completely stopped before changing direction.

5.3. Mode Selection (Drilling, Impact, Screwdriving)

Rotate the mode selector ring to choose the appropriate setting:

• Mòd perçage: For drilling into wood, metal, and plastics.
• Mòd Perçage Enpak: For drilling into masonry and concrete (if applicable to this model's capabilities).
• Mòd visaj: Use with the torque adjustment ring to prevent over-tightening screws.

5.4. Ajisteman koupl

In screwdriving mode, rotate the torque adjustment ring to select the desired torque level. Lower numbers indicate lower torque for smaller screws or softer materials, while higher numbers provide more torque for larger screws or harder materials. The drill will stop driving when the selected torque is reached.

6. Antretyen

6.1. Netwayaj

• Regularly clean the ventilation openings of the drill to prevent overheating.
• Sèvi ak yon mou, damp twal pou siye deyò zouti a. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Keep the chuck jaws free from dust and debris to ensure proper bit gripping.

6.2. Depo

• Store the drill and battery packs in a cool, dry place, away from direct sunlight and moisture.
• Ensure the battery pack is partially charged (around 50%) before long-term storage to prolong its lifespan.
• Sere deyò nan atenn timoun yo.

6.3. Swen batri

• Do not expose battery packs to extreme temperatures or direct heat.
• Evite dechaje pil la nèt souvan, paske sa ka diminye dire lavi li an jeneral.
• If the battery pack is not used for an extended period, recharge it every 3-6 months.

NAN. Depanaj

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact TOTAL customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Remak: Tèm ak kondisyon garanti espesifik yo ka varye selon rejyon an.