AUSOM Leopard DT1 Pro Electric Scooter User Manual

Entwodiksyon

The AUSOM Leopard DT1 Pro Electric Scooter is designed for adults seeking powerful performance, advanced safety features, and supreme riding comfort. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Key features include dual 1000W motors for speeds up to 41 mph, an 18.2Ah battery offering up to 47 miles range, dual braking systems (ZOOM hydraulic disc brakes and EABS), SUV-level swingarm suspension, a smart LCD display, and a comprehensive lighting system with turn signals.

Enfòmasyon sou Sekirite

WARNING: Always wear a helmet and appropriate safety gear when riding. Obey all local traffic laws and regulations. Do not ride in wet conditions or on slippery surfaces. Always perform a pre-ride inspection.

• Familiarize yourself with all controls and features before riding.
• Asire w ke tout boulon ak eleman fikse yo sere byen anvan chak woulib.
• Tcheke presyon kawotchou regilyèman.
• Pa depase limit pwa maksimòm lan ki se 143 liv.
• Avoid riding in heavy rain or through deep puddles to prevent damage to electrical components.
• Use turn signals and lights to enhance visibility, especially at night.
• Kenbe yon distans ki an sekirite ak lòt machin ak pyeton.

Kontni pake

Upon opening the box, verify that all components are present and undamaged. The standard package includes:

• AUSOM Leopard DT1 Pro Electric Scooter (main unit)
• Manyèl itilizatè
• Adaptè pouvwa
• Pouvwa kab
• Twous zouti
• NFC Card (for security lock system)

Enstalasyon ak Asanble

Follow these steps to assemble your AUSOM Leopard DT1 Pro Electric Scooter:

1. Devlope tij la: Carefully lift the scooter from its packaging. Open the kickstand to allow the scooter to stand upright. Unfold the stem until it locks securely into place.
   

   Image: The AUSOM Leopard DT1 Pro Electric Scooter shown both folded for transport and fully unfolded for riding, highlighting its compact design and readiness for use.

2. Atache gidon an: Place the handlebar onto the top of the stem. Ensure the clip is centered.
3. Install the Display: Position the smart LCD display on the handlebar. Align the four M5 screws with the screw holes in the stem clip and tighten them securely to fasten the display and handlebar.
4. Attach Motor Nut Caps: Secure the four motor nut caps to the front and rear motor nuts as shown in the assembly video.

Enstriksyon Operasyon

Power On/Off and Security Lock

To power on the scooter, press the power switch for 3 seconds. The LCD display will show "Card". Place the NFC card over the NFC detection area on the display to activate the scooter. The display will light up, indicating it's ready for use. To power off, press and hold the power button for 3 seconds.

Adjusting Speed Modes

The scooter features three riding modes: ECO, SPORT, and RACE. After exiting PARK mode (by pressing the Plus button), use the Plus (+) or Minus (-) buttons on the control panel to switch between these modes. Each mode offers different speed and power characteristics:

• Mòd ECO: For maximum range and energy efficiency.
• Mòd ESPÒ: Balanced performance for daily commuting.
• RACE Mode: Full power and speed, reaching up to 41 mph.

Image: A rider demonstrating the power and speed of the AUSOM Leopard DT1 Pro, highlighting its dual 1000W motors and maximum speed capabilities across different modes.

Lighting System and Turn Signals

Scooter a ekipe ak yon sistèm ekleraj konplè pou amelyore vizibilite ak sekirite:

• Limyè: Press the Plus button for 3 seconds to turn the ultra-bright front headlight on or off.
• Brake and Tail Lights: Safety brake and warning tail lights activate automatically when braking.
• Siyal pou vire: Push the turn signal light switch to the left or right to activate the corresponding turn signal. Push the switch in the same direction again to turn it off.

Image: The AUSOM Leopard DT1 Pro Electric Scooter with its front headlight and side lights illuminated, demonstrating its visibility features for night riding.

Kòn

Press the horn button located on the left handlebar to alert others of your presence.

Single / Doub Motè Mòd

Short press the DDM button to switch between Single and Dual Motor modes, allowing for power conservation or full power as needed.

Pliye ak transpò

The scooter is designed for easy folding and transport. Locate the folding mechanism on the stem, release the latch, and fold the stem down towards the deck until it locks. This compact design makes it convenient for storage or carrying.

Image: A visual guide illustrating the simple steps required to fold the AUSOM Leopard DT1 Pro Electric Scooter, making it compact for storage or transportation.

Chaje

The scooter features dual charging inputs, allowing for a full charge in approximately 4-5 hours. It also has dual charging outputs (USB-B and Type-C) to power your devices on the go.

Image: The AUSOM Leopard DT1 Pro Electric Scooter with a graphic overlay illustrating its impressive battery capacity and maximum range of up to 47 miles.

Riding Performance and Features

The AUSOM Leopard DT1 Pro is built for diverse terrains and high performance:

• Motè doub 1000W: Provides exceptional power and acceleration for various riding conditions.
• Dual Braking Systems: Equipped with ZOOM hydraulic disc brakes and an EABS system for precise and responsive stopping power.
• SUV-Level Suspension: Features a swingarm design that effectively absorbs shocks and vibrations, ensuring a smooth ride even on rough terrain.
• 10"x3" Off-Road Tires: Thick pneumatic tires designed to effortlessly navigate various obstacles and provide excellent grip.

Antretyen

Regular maintenance is crucial for the longevity and safe operation of your scooter:

• Netwayaj: Siye scooter a ak piblisiteamp twal apre chak woulib. Evite sèvi ak jè dlo anba presyon dirèkteman sou konpozan elektrik yo.
• Kawotchou: Check tire pressure weekly. Recommended pressure is typically found on the tire sidewall. Inspect tires for wear and tear.
• Fren: Regularly check brake lever tension and brake pad wear. Adjust or replace as needed.
• Batri: Charge the battery fully after each use, especially if storing for an extended period. Do not allow the battery to fully discharge.
• Fastener: Periodically check and tighten all screws and bolts, especially those on the handlebars, stem, and wheels.
• Depo: Sere scooter a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.

Depanaj

Men kèk pwoblèm komen ak solisyon potansyèl yo:

If the issue persists after attempting these solutions, please contact AUSOM customer support for further assistance.

Espesifikasyon

Garanti ak sipò

The AUSOM Leopard DT1 Pro Electric Scooter comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, replacement parts, or any inquiries not covered in this manual, please contact AUSOM customer service through their official websit entènèt la oubyen magazen kote ou te achte pwodwi a.

Pou plis enfòmasyon, vizite ofisyèl la AUSOM Store on Amazon.