TOTAL TIWLI20401 Cordless Impact Wrench User Manual

1. Entwodiksyon

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOTAL TIWLI20401 Cordless Impact Wrench. Please read this manual thoroughly before using the tool and retain it for future reference.

The TOTAL TIWLI20401 is a powerful and efficient cordless impact wrench designed for fastening and loosening applications. It features a brushless motor for enhanced durability and performance, a 1/2 inch square drive, and an integrated LED work light.

2. Enstriksyon Sekirite

Toujou obsève prekosyon sekirite debaz yo pou diminye risk dife, chòk elektrik, ak aksidan pèsonèl lè w ap itilize zouti elektrik.

• Sekirite Zòn Travay: Kenbe zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Evite kontak kò ak sifas ki konekte ak tè. Pa ekspoze zouti elektrik yo anba lapli oswa nan kondisyon mouye.
• Sekirite Pèsonèl: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte pake batri a nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Sekirite nan pake batri: Use only the specified battery pack for this tool. Do not incinerate the battery pack even if it is severely damaged.

3. Konpozan ak Karakteristik

Familiarize yourself with the key components and features of your TOTAL TIWLI20401 Cordless Impact Wrench.

Figi 1: Prensipal view of the TOTAL TIWLI20401 Cordless Impact Wrench, highlighting its ergonomic design and brushless motor branding.

• Motè Brushless: Provides higher efficiency, longer durability, and reduced maintenance compared to brushed motors.
• 1/2 Inch Square Drive: Ensures a secure and stable connection for various socket sizes.
• Deklanche vitès varyab: Allows for precise control over the rotation speed, adapting to different application requirements.
• Chanjman pou pi devan/pou dèyè: Easily change the direction of rotation for fastening and loosening tasks.
• Limyè travay LED entegre: Illuminates the work area for improved visibility in dimly lit conditions.
• Segondè pwodiksyon koupl: Offers a fastening torque of 400Nm and a nut-busting torque of 550Nm for demanding applications.

Figure 2: The impact wrench shown with common socket sizes (17mm, 19mm, 21mm) and its packaging. Note that the battery and charger are sold separately.

4. Enstalasyon

4.1. Battery Installation (Battery and Charger Sold Separately)

1. Asire w ke pake batri a konplètman chaje anvan w itilize.
2. Align the battery pack with the battery port at the base of the impact wrench.
3. Glise pake batri a nan pò a jiskaske li fè yon klik byen fèm nan plas li.
4. Pou retire li, peze bouton lage batri a (si genyen) epi glise pake batri a soti.

4.2. Socket Attachment

1. Ensure the tool is switched off and the battery is removed before attaching or removing sockets.
2. Chwazi douy enpak kare 1/2 pous ki apwopriye pou aplikasyon w lan.
3. Push the socket firmly onto the square drive anvil until it locks into place.
4. To remove, pull the socket off the anvil. Some sockets may require pulling back a retaining ring or pin.

5. Operasyon Enstriksyon

5.1. Powering On / Off

The tool is powered on by pressing the variable speed trigger and powered off by releasing li.

5.2. Selecting Rotation Direction (Forward/Reverse)

The forward/reverse switch is located above the trigger. Push the switch to the left for forward rotation (fastening) and to the right for reverse rotation (loosening). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.

5.3. Kontwòl Vitès Varyab

The tool's speed is controlled by the pressure applied to the trigger. Pressing the trigger lightly results in lower speed, while pressing it fully increases the speed up to the maximum. This allows for precise control depending on the task.

5.4. Fastening and Loosening

1. Select the correct socket and attach it securely.
2. Set the forward/reverse switch to the desired direction.
3. Mete priz la sou eleman fiksè a.
4. Gradually press the trigger to start the tool. Apply steady pressure to the tool to prevent kickback.
5. For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener is free.

Caution: Always ensure the fastener and socket are correctly aligned to prevent damage to both the tool and the fastener.

6. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal kle enpak ou a.

• Netwayaj: Kenbe ouvèti vantilasyon zouti a pwòp pou anpeche li chofe twòp. Sèvi ak yon twal mou, damp cloth to clean the housing. Do not use harsh chemicals or abrasive cleaners.
• Depo: Store the tool and battery pack in a cool, dry place, away from direct sunlight and moisture. Keep out of reach of children.
• Swen batri: If the battery pack is not used for extended periods, charge it periodically to maintain its capacity. Do not store discharged battery packs.
• Enspeksyon: Periodically inspect the power tool for any damaged parts, loose screws, or worn components. Have any necessary repairs performed by qualified service personnel.

NAN. Depanaj

Gade seksyon sa a pou pwoblèm komen ak solisyon yo.

If the problem persists after attempting these solutions, contact TOTAL customer support or a qualified service center.

8. Espesifikasyon

9. Garanti ak sipò

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official TOTAL websit la. Kenbe resi acha ou kòm prèv acha pou nenpòt reklamasyon garanti.

For further assistance, you may contact TOTAL customer service through their official channels.