Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV) User Manual

1. Entwodiksyon

This manual provides essential information for the safe and efficient operation of your Aninerel 3600W Solar Inverter Charger, Model ANJ-3600W-LV. This device is a pure sine wave hybrid inverter designed to convert DC 48V to AC 110V, featuring a built-in 80A MPPT solar charge controller. It supports various battery types, including battery-less operation, and offers flexible charging and output modes for diverse energy requirements. Please read this manual thoroughly before installation and use.

Aninerel 3600W Solar Inverter Charger with Wi-Fi module

Figure 1: Aninerel 3600W Solar Inverter Charger and Wi-Fi module.

2. Enfòmasyon sou Sekirite

Please observe the following safety precautions to prevent injury and damage to the inverter or connected equipment.

Enstalasyon an dwe fèt pa pèsonèl kalifye, dapre kòd elektrik lokal yo.
Ensure all power sources (PV, battery, AC grid) are disconnected before installation or maintenance.
Pa demonte envèstisè a. Pa gen pyès itilizatè a ka repare anndan l.
Avoid exposing the inverter to rain, snow, liquids, or excessive dust.
Asire bon vantilasyon alantou varyateur la pou anpeche surchof.
Connect the inverter to a proper ground.
Verify correct polarity when connecting batteries and PV arrays.
This inverter is designed for single-phase (120V) output and does not support parallel operation for increased power or split-phase configurations.

Inverter protection features including short circuit, overcurrent, backflow, overload, over-voltage, undervoltage, overheating, and overcharge protection.

Figi 2: Karakteristik Pwoteksyon Envèstisè a.

3. Pwodwi Features

The Aninerel 3600W Solar Inverter Charger offers a range of features for efficient power management:

Tout-an-yon konsepsyon: Combines a 3.6KW pure sine wave inverter, a 40A battery charger, and an 80A MPPT solar charge controller.
Segondè Antre PV: Supports a maximum PV open circuit voltage nan 300VDC.
Batri konpatibilite: Compatible with 48V AGM/Sealed, Gel, Flooded, and Lithium batteries. Also supports battery-less operation.
Mòd Chaje Fleksib: Offers Hybrid Charging, Utility Priority Charging, Solar Priority Charging, and Only Solar Charging.
Mòd pwodiksyon miltip: Includes Utility Priority, Solar and Utility Hybrid, Solar Priority, and Inverter Priority.
Time-Slot Function: Allows setting specific charging and discharging periods to optimize energy usage based on local tariffs.
Entèfas kominikasyon: Supports CAN, USB, and RS485 for communication with compatible batteries and monitoring systems.
Pwoteksyon konplè: Features PV input over-voltage/current protection, AC input over-voltage pwoteksyon, batri sou-voltage protection, and overload protection.

Diagram showing inverter features: Battery Compatibility, Grid Connection, Flexible Settings, Wireless Communication.

Figure 3: Key Features of the Aninerel Hybrid Solar Inverter Charger.

4. Konpozan pwodwi ak pò

Familyarize w ak konpozan ak pò koneksyon envèstisè a anvan enstalasyon an.

Diagram labeling the ports and components of the Aninerel solar inverter, including indicator light, LCD screen, touch keys, AC input/output, PV input, battery terminals, communication ports (USB, RS485, CAN, WiFi), and cooling fan.

Figure 4: Inverter Front and Side Panel Overview with Labeled Ports.

Endikatè limyè
Ekran LCD
Touch Keys (ESC, UP, DOWN, ENTER)
Pwoteksyon Surcharge
Grounding Screw Hold
AC Sòti Port
Wi-Fi Port (Optional)
AC Antre Port
RS485-2 Communication Port
RS485-1 Communication Port
Port kominikasyon USB
Fanatik refwadisman
ON / OFF Rocker switch
Pò kontak sèk
Current Sharing Port (for parallel module only, not supported by this model)
Parallel Communication Port (for parallel module only, not supported by this model)
Port batri
PV Port

Nòt: This specific model (ANJ-3600W-LV) does not support parallel operation. Therefore, ports 15 and 16 are not applicable for this unit.

5. Enstalasyon ak Enstalasyon

Bon enstalasyon enpòtan anpil pou pèfòmans ak sekirite envèstisè a.

5.1 Debalaj ak enspeksyon

Open the package and verify all accessories are present as shown in Figure 5.
Inspect the inverter for any physical damage. Contact your dealer immediately if any damage is found.

Image showing the Aninerel 3600W Solar Inverter Charger and its accessories: instruction manual, installation toolkit, anti-reverse current CT, and WiFi module.

Figure 5: Product Accessories.

5.2 Monte varyateur la

Choose a suitable location: indoors, protected from direct sunlight, rain, and dust.
Ensure adequate clearance around the inverter for proper airflow (at least 20 cm on all sides).
Monte envèstisè a vètikalman sou yon miray solid avèk eleman fikse ki apwopriye yo.

5.3 Koneksyon fil elektrik

Follow the wiring diagram carefully. All wiring should be done by a qualified electrician.

Detailed wiring diagram for the Aninerel 3600W Solar Inverter Charger, showing connections for solar panels, batteries, AC input from grid/generator, and AC output to household loads. Includes recommended cable sizes and breaker ratings.

Figure 6: Typical Wiring Diagram.

Koneksyon batri: Connect the 48V battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. Recommended cable: 2 AWG/25 mm². Recommended fuse: 150A.
Koneksyon Anrejistreman PV: Connect solar panels to the PV+ and PV- terminals. Max PV input power: 4000W. Max PV open circuit voltage: 300Vdc. MPPT voltage range: 80Vdc-300Vdc. Recommended cable: 10 AWG/6 mm². Connect solar modules in series.
Koneksyon Antre AC: Connect the AC grid or generator to the AC Input port. Max AC input voltage: 300VAC. Max AC charging current: 80A. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
Koneksyon Sòti AC: Connect your AC loads to the AC Output port. AC output power: 3600W. AC output voltage: 110V / 120V. Recommended cable: 10 AWG/6 mm². Recommended breaker: 63A.
Atè: Connect the grounding screw to a reliable earth ground.

Enpòtan: Double-check all connections before powering on the inverter. Incorrect wiring can cause severe damage.

6. Operasyon Enstriksyon

Once installed, you can configure and operate your inverter using the LCD display and touch keys.

6.1 Premye pouvwa-up

Ensure all wiring is secure and correct.
Limen disjonktè batri a.
Turn on the PV array breaker (if connected).
Limen disjonktè antre AC a (si li konekte).
Flip the ON/OFF rocker switch on the inverter to the "ON" position.
The LCD screen will light up, and the inverter will perform a self-test.

6.2 Ekran LCD ak Paramèt

Use the ESC, UP, DOWN, and ENTER buttons to navigate the LCD menu and adjust settings. Refer to the detailed manual for specific menu options.

6.3 Charging Priority Modes

These settings determine how your battery bank is charged from available power sources.

Diagram illustrating three charging priority modes: Solar First AC Input Next, Solar and AC Input Simultaneously, and Solar Only.

Figure 7: Charger Source Priority Options.

Solar First AC Input Next: Solar panels prioritize charging the battery. AC input charges only if solar power is insufficient.
Solar and AC Input Simultaneously: Both solar energy and utility power charge the battery bank at the same time.
Solè sèlman: Solar energy is the exclusive charging source, regardless of AC input availability.

6.4 Output Source Priority Modes

These settings determine which power source the inverter uses to supply connected appliances.

Diagram illustrating three output source priority modes: Solar First, AC First, and Solar and Battery First (DC Priority).

Figure 8: Output Source Priority Options.

Solè An Premye: Prioritizes powering appliances from solar. If solar is insufficient, AC input will supplement.
AC Premye: Redirects AC input to power all appliances and uses solar and batteries only when AC input is unavailable.
DC Priority (Solar and Battery First): Prioritizes solar power. If solar is insufficient, the battery bank supplies power. AC input powers only when battery voltage desann nan yon valè pwogramab.

6.5 Battery Type Configuration

The inverter is compatible with various 48V battery types. Ensure the correct battery type is selected in the settings for optimal charging and discharge management.

Image showing the inverter and a battery, with icons for different battery types: GEL, FLD (Flooded), LI (Lithium), SLD (Sealed), and USE (User-defined).

Figure 9: Supported Battery Types.

AGM/Sealed
Jèl
Inonde
Lityòm
User Mode (for custom battery parameters)

The inverter also supports battery-free operation. For lithium batteries, the shore power and photovoltaic can activate dormant lithium batteries.

7. Siveyans Wi-Fi

The inverter comes with an optional Wi-Fi module for remote monitoring.

Image showing the inverter connected to a Wi-Fi module, with a person monitoring the system on a smartphone app.

Figure 10: Wi-Fi Monitoring Setup.

Connect the Wi-Fi module to the designated Wi-Fi port on the inverter.
Download the compatible monitoring application to your smartphone or tablet.
Follow the app's instructions to register your device and connect it to your local Wi-Fi network.
Once connected, you can monitor the inverter's status, energy production, and consumption in real-time from anywhere.

Nòt: Refer to the Wi-Fi module's separate instruction guide for detailed setup procedures, as app names and connection steps may vary.

8. Antretyen

Antretyen regilye asire lonjevite ak pèfòmans optimal envèstisè ou a.

Netwayaj: Periodically clean the inverter's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
Koneksyon: Chak ane, tcheke tout koneksyon elektrik yo pou wè si yo sere epi si gen siy korozyon.
Anviwònman: Asire w ke anviwònman operasyon an rete nan limit tanperati ak imidite espesifye yo.
Enspeksyon batri: If using lead-acid batteries, check electrolyte levels and terminal conditions as per battery manufacturer guidelines.

Toujou dekonekte tout sous kouran anvan ou fè nenpòt antretyen.

NAN. Depanaj

Seksyon sa a bay solisyon pou pwoblèm komen. Pou pwoblèm ki pa nan lis la a, kontakte sèvis kliyan.

Pwoblèm	Kòz posib	Solisyon
Envèstisè a pa limen.	Pa gen koneksyon batri, volim batri a batage, ON/OFF switch off, blown fuse/breaker.	Tcheke koneksyon batri ak voltage. Ensure ON/OFF switch is on. Check and replace fuses/reset breakers.
Pa gen pwodiksyon AC.	Overload, short circuit, low battery, inverter fault.	Reduce load. Check for short circuits in wiring. Check battery voltage. Consult LCD error codes.
PV not charging batteries.	Pa gen limyè solèy, seri fotovoltaik la dekonekte, vòltaj fotovoltaik ki pa kòrèktage, MPPT controller fault.	Check sunlight conditions. Verify PV connections and voltage. Ensure PV input is within operating range.
Wi-Fi module not connecting.	Incorrect app, poor Wi-Fi signal, incorrect setup steps.	Ensure correct app is used. Check Wi-Fi signal strength. Re-follow Wi-Fi module setup instructions carefully.

10. Espesifikasyon

Key technical specifications for the Aninerel 3600W Solar Inverter Charger (Model ANJ-3600W-LV):

Non modèl: ANJ-3600W-LV
Pouvwa pwodiksyon nominal: 3600 Watts
Maksimòm pik pouvwa: 7200 VA
Antre Voltage (DC): 48 Volts
Sòti Voltage (AC): 110V / 120V (Monofaz)
Max. PV Open Circuit Voltage: 300 Vdc
PV Operating Voltage Range: 80 - 300 Vdc
MPPT Voltage Range: 90 - 260 Vdc
Max. AC Charging Current: 80A
Batri Voltage Range: 40 - 60 Vdc
Pwa atik: 19.36 liv
Dimansyon pake: 19.57 x 14.17 x 7.09 pous
Manifakti: Shenzhen Anenji Energy Technology Co.,Ltd

11. Garanti ak sipò

For warranty information, technical assistance, or customer support, please contact Aninerel directly.

Aninerel customer support contact information: email anenji168@outlook.com and phone +86 188 0375 9233, available PDT: 9AM - 6PM.

Figure 11: Aninerel Customer Support Contact Information.

Imèl: anenji168@outlook.com
Telefòn: +86 188 0375 9233
Support Hours (PDT): 9 AM - 6 PM

Please have your model number (ANJ-3600W-LV) and purchase date ready when contacting support.

Aninerel ANJ-3600W-LV