Radiomaster Pocket Hall Gimbal Transmitter Remote Control Manual

Entwodiksyon

The Radiomaster Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall gimbals, a foldable antenna, and is available in different versions, including CC2500 and ExpressLRS. This manual provides essential information for setting up, operating, and maintaining your Radiomaster Pocket.

Ki sa ki nan bwat la

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

• 1 x Pocket Radio
• 1 x Sak pou pote pèsonalize
• 1 x USB-C kab
• 1 x Pwoteksyon ekran
• 1 x fichye
• 1 x Manyèl (dokiman sa a)
• 4 x Low Tension Springs (for gimbals)

Pwodwi souview

The Radiomaster Pocket is designed for portability and performance. Key features include:

• Hall Effect Gimbals: For smooth centering and precise response.
• Limyè ki ap dirije ki entegre: To visualize your inputs.
• Konsepsyon pòtab ak lejè: Fasil pou transpòte ak magazen.
• Foldable Antenna: Amelyore portabilite.
• Removable Stick Ends: For customization and compact storage.
• Ekran LCD retroeklere: Offers a clear balance of size and functionality.
• Bò Modil Ekstèn: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Battery Compatibility: Provides extended battery life (batteries not included).
• Pre-installed EdgeTX Firmware: Ready for advanced customization and control.

Enstalasyon

1. Enstalasyon batri

The Radiomaster Pocket requires two 18650 batteries (not included). To install:

1. Jwenn konpatiman batri a sou dèyè transmetè a.
2. Louvri kouvèti lòj la.
3. Mete de pil 18650 yo nan plas yo, epi asire w ke polarite a kòrèk.
4. Fèmen kouvèti lòj batri a byen.

2. Premye Limen

Press and hold the power button located on the front of the transmitter until the screen illuminates and the EdgeTX firmware loads. The transmitter will perform a self-check upon startup.

3. Antenna and Stick Ends

• Antèn: Unfold the antenna to its upright position for optimal signal transmission. Fold it down for storage.
• Bout Baton: The transmitter comes with removable stick ends. You can customize them or remove them for more compact storage.

Enstriksyon Operasyon

1. Kontwòl debaz yo

Familyarize w avèk kontwòl prensipal yo:

• Gimbal: Control primary flight surfaces (throttle, rudder, aileron, elevator).
• Bouton taye: Used for fine-tuning channel outputs.
• Bouton Navigasyon: For menu navigation on the LCD screen.
• Bouton pouvwa: Turns the unit on/off and can be used for menu selection.

2. Ajisteman Gimbal

The gimbals can be adjusted for tension and self-centering. Refer to Figure 7 for adjustment points:

• A (I-R): Turn clockwise to disable self-centering (throttle). Turn counter-clockwise to enable self-centering (throttle).
• B (T): To adjust the throttle stick tension. Turn clockwise to increase stick tension. Turn counter-clockwise to decrease stick tension.
• C (UP-DOWN): Turn clockwise to increase vertical stick tension. Turn counter-clockwise to decrease stick tension.
• D (LEFT-RIGHT): Turn clockwise to increase horizontal stick tension. Turn counter-clockwise to decrease stick tension.

Espesifikasyon

Antretyen

• Netwayaj: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
• Depo: Sere transmetè a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm. Retire pil yo si w ap sere l pou yon bon bout tan.
• Mizajou mikrolojisyèl: Periodically check the official Radiomaster websit pou mizajou firmwèr pou asire pèfòmans optimal ak aksè a nouvo fonksyonalite.

Depanaj

Pwoblèm komen ak solisyon:

• Transmitter not powering on:
  • Asire w ke pil yo byen enstale epi yo byen chaje.
  • Tcheke polarite batri a.
• No signal to receiver:
  • Verify the antenna is unfolded and in an upright position.
  • Ensure the transmitter and receiver are properly bound. Refer to your receiver's manual for binding instructions.
  • Tcheke pou wè si gen entèferans ki soti nan lòt aparèy 2.4GHz yo.
• Gimbal response issues:
  • Check gimbal tension settings as described in the "Gimbal Adjustment" section.
  • Calibrate gimbals through the EdgeTX firmware settings if necessary.

For further assistance, please refer to the official Radiomaster support resources or community forums.

Enfòmasyon enpòtan sou sekirite

• Always operate your RC equipment responsibly and in accordance with local laws and regulations.
• Ensure your batteries are in good condition and charged properly.
• Never operate your RC model near people, animals, or property that could be damaged.
• Perform pre-flight checks before each use to ensure all controls are functioning correctly.
• Keep the transmitter away from water and moisture, as it is not water resistant.

Garanti ak sipò

For information regarding warranty coverage, technical support, or service, please visit the official Radiomaster websit la oubyen kontakte konsesyonè otorize ou a. Kenbe prèv acha ou a pou reklamasyon garanti.