Blukar K9111 dirije Headlamp Manyèl itilizatè

Entwodiksyon

Thank you for choosing the Blukar K9111 LED Headlamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new headlampTanpri li manyèl sa a byen anvan ou itilize li epi konsève li pou referans pita.

Figure 1: Blukar K9111 LED Headlamps (Purple, 2-Pack)

Kontni pake

• Blukar K9111 dirije Headlamp (Inite ksma)
• USB-C Charging Cable (2 units)
• Manyèl itilizatè

Pwodwi souview

The Blukar K9111 LED Headlamp is designed for various activities requiring hands-free illumination. It features dual light sources, multiple lighting modes, motion sensor functionality, and a durable, waterproof design.

Karakteristik kle:

• Super Bright Ekleraj: Equipped with first-class LED chips, COB, and XPG LED technology for bright and stable light up to 2000 lumens.
• Doub sous limyè: Combines spotlight and floodlight capabilities for versatile lighting.
• 8 mòd ekleraj: Includes 5 normal modes (XPG white, COB white, XPG+COB white, COB red, COB red strobe) and 3 motion sensor modes (XPG white, COB white, XPG+COB white).
• Capteur Mouvman: Allows for hands-free operation by waving your hand to turn the light on/off.
• Dimmable Klate: Long press the button to adjust brightness from 100% to 30%.
• Ang reglabl: L laamp head can be tilted up and down by 45° to direct light precisely.
• Batri rechargeable: Built-in 1200mAh lithium polymer battery, rechargeable via USB-C.
• IPX5 ki enpèmeyab: Resistant to splashes and rain, suitable for various weather conditions.
• Lejè & Konfòtab: Weighs only 2.96 ounces with an adjustable, breathable elastic headband.

Figure 2: Super Bright Illumination

Figure 3: Spotlight and Floodlight Modes

Video 1: Official Blukar LED Headlamp demonstration, showcasing its features and various lighting modes.

Enstalasyon

1. Inisyal chaj: Anvan premye itilizasyon an, chaje tèt la nèt.amp using the provided USB-C cable. Refer to the 'Charging' section for details.
2. Ajiste Bando: The elastic headband is adjustable. Slide the buckle to fit comfortably and securely around your head. Ensure it is snug but not too tight. The headband is removable and washable.
3. Ajiste Lamp Ang: L laamp head can be tilted up or down by 45 degrees. Adjust it to direct the light beam to your desired area.

Figure 4: Lightweight and Adjustable Comfort

Enstriksyon Operasyon

Power On/Off & Seleksyon Mode:

Headl laamp features two buttons on top: a power button and a motion sensor button.

1. Normal Modes: Peze a bouton pouvwa (left button) to cycle through the 5 normal lighting modes:
   • XPG White (Spotlight)
   • COB White (Floodlight)
   • XPG + COB White (Spotlight & Floodlight combined)
   • COB Red (Red Floodlight)
   • COB Red Strobe (Flashing Red Light)
   To turn off the light directly from any normal mode, short press the power button.
2. Dimmable Klate: In any white light mode (XPG, COB, or XPG+COB), long press the bouton pouvwa to adjust the brightness from 100% down to 30%. Release the button at your desired brightness level.
3. Mòd Capteur Mouvman: Peze a motion sensor button (right button) to activate the motion sensor function. The indicator light will turn blue. Cycle through the 3 motion sensor modes:
   • XPG White (Motion Sensor)
   • COB White (Motion Sensor)
   • XPG + COB White (Motion Sensor)
   When in motion sensor mode, you can turn the light on or off by simply waving your hand in front of the headlamp. To exit motion sensor mode, press the motion sensor button again.

Figure 5: 8 Lighting Modes and Dimmable Brightness

Figure 6: Motion Sensor Switch in Use

Chaje

The Blukar K9111 LED Headlamp is equipped with a built-in 1200mAh rechargeable lithium polymer battery.

1. Locate the USB-C charging port on the bottom of the headlamp, protected by a rubber cover.
2. Open the rubber cover and connect the provided USB-C cable to the charging port.
3. Connect the other end of the USB-C cable to a compatible USB power source (e.g., AC charger, power bank, computer USB port).
4. The battery indicator lights on the headlamp will show the charging status. Once all indicator lights are solid, the headlamp se konplètman chaje.
5. After charging, ensure the rubber cover is securely closed to maintain the IPX5 waterproof rating.

Figure 7: USB-C Charging and Battery Capacity

Antretyen

• Netwayaj: Siye tèt laamp body with a soft, damp cloth. Do not use abrasive cleaners or solvents. The headband is removable and washable.
• Depo: Sere tèt laamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery every 3-6 months to prolong its lifespan.
• Rezistans dlo: Always ensure the USB-C charging port cover is securely closed to maintain the IPX5 waterproof rating.

Figi 8: Karakteristik ki reziste dlo IPX5 la

Depanaj

• Light Flickers in Motion Sensor Mode: This is a normal function of the motion sensor and does not indicate a poor connection. To stop flickering, press the power button to exit motion sensor mode.
• Headlamp Pa Limen: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights activate.
• Motion Sensor Not Responding: Ensure the motion sensor mode is activated (blue indicator light). Check for any obstructions in front of the sensor.

Espesifikasyon

Enfòmasyon sou Sekirite

• Do not look directly into the LED light when it is on, as it may cause temporary vision impairment.
• Kenbe soti nan atenn timoun yo.
• Pa demonte oswa modifye headl laamp.
• Use only the provided or certified USB-C cable for charging.
• Evite ekspoze headl laamp to extreme heat or fire.

Garanti ak sipò

Blukar products come with a standard manufacturer's warranty. For detailed warranty information, product support, or any inquiries, please refer to the contact information provided on the product packaging or visit the official Blukar websit.