Memorex MX-PS1501 15-Inch PA Speaker Instruction Manual

Entwodiksyon

Mèsi pou acha aasing the Memorex MX-PS1501 15-Inch PA Speaker. This manual provides essential information for the safe and efficient operation of your new speaker. Please read this manual thoroughly before use and retain it for future reference.

Imaj: Devan view of the Memorex MX-PS1501 PA Speaker, showcasing its translucent cabinet and dynamic LED lighting around the woofer.

Enfòmasyon sou Sekirite

AVÈTISMAN: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not open the cabinet. Refer servicing to qualified personnel only.

ATANSYON: For continued protection against risk of fire, replace with the same type and value fuse indicated on the product. Refer to qualified service personnel for replacement.

• Li tout enstriksyon anvan ou opere aparèy la.
• Kenbe enstriksyon sa yo pou referans nan lavni.
• Obsève tout avètisman ki sou aparèy la ak nan enstriksyon yo fonksyone.
• Swiv tout enstriksyon yo.
• Pa sèvi ak aparèy sa a toupre dlo.
• Netwaye sèlman ak yon twal sèk.
• Pa bloke okenn ouvèti vantilasyon. Enstale li dapre enstriksyon manifakti a.
• Pa enstale tou pre okenn sous chalè tankou radyatè, rejis chalè, recho, oswa lòt aparèy (tankou amplifiers) ki pwodui chalè.
• Pa defèt objektif sekirite nan ploge nan polarize oswa tè-kalite. Yon ploge polarize gen de lam ak youn pi laj pase lòt la. Yon ploge ki kalite tè gen de lam ak yon twazyèm pwong tè. Yo bay lam lajè a oswa twazyèm pikèt la pou sekirite ou. Si priz yo bay la pa anfòm nan priz ou a, konsilte yon elektrisyen pou ranplase priz demode a.
• Pwoteje kòd elektrik la pou yo pa mache oswa kwense, sitou nan priz, resipyan konvenyans, ak pwen kote yo sòti nan aparèy la.
• Itilize sèlman atachman/akseswa manifakti a espesifye.
• Itilize sèlman ak charyo a, kanpe, tripod, bracket, oswa tab ki espesifye pa manifakti a, oswa vann ak aparèy la. Lè yo itilize yon kabwa, pran prekosyon lè w ap deplase konbinezon kabwa a/aparèy la pou evite blese nan ranvèse.
• Deploge aparèy sa a pandan tanpèt zèklè oswa lè li pa itilize pou yon peryòd tan ki long.
• Refere tout sèvis yo bay pèsonèl sèvis kalifye. Reparasyon nesesè lè aparèy la domaje nenpòt fason, tankou kòd kouran oswa ploge domaje, likid koule oswa objè tonbe nan aparèy la, aparèy la te ekspoze a lapli oswa imidite, li pa fonksyone nòmalman. , oswa li te tonbe.

Kontni pake

Asire w tout bagay yo la lè w ap debale yo:

• Memorex MX-PS1501 PA Speaker
• Oratè kanpe
• Mikwofòn branche
• Pouvwa kab
• Gid pou kòmanse rapidman (gade manyèl sa a pou enstriksyon detaye)

Pwodwi souviewKontwòl ak Karakteristik

Familiarize yourself with the control panel and various inputs/outputs of your MX-PS1501 speaker.

Image: Rear control panel of the Memorex MX-PS1501 speaker, showing all inputs, outputs, and control knobs.

1. DSP Preset Select (4 Modes): Cycle through different Digital Signal Processing presets (e.g., Standard, Live, Monitor, Vocal) to optimize sound for various applications.
2. DSP Monitor: Display for current DSP mode and Bluetooth status.
3. Plas USB: Mete yon kle USB pou li ka koute odyo.
4. Control Panel (TWS/Bluetooth/Volume+/-/Next Song/Play/Pause): Buttons for media control, Bluetooth functions, and TWS pairing.
5. Bouton bas: Ajiste pwodiksyon ba-frekans lan.
6. Bouton Volim Bluetooth: Controls the volume of Bluetooth audio input.
7. Mic Line Input Volume Knob: Adjusts the volume for microphone and line inputs.
8. Mic Line Input Volume Knob: (Duplicate label in image, likely for a second input or a master mic/line volume)
9. Treble bouton: Ajiste pwodiksyon frekans segondè a.
10. Mic/Line XLR Input: Connect microphones or line-level audio sources using an XLR cable.
11. Mic/Line XLR Input: (Duplicate label in image, likely a second XLR input)
12. Aux 3.5mm Input / RCA Input: Connect external audio devices via 3.5mm or RCA cables.
13. Mix XLR Output: Output for connecting to another speaker or audio system.
14. LED Switch Mode Button: Cycles through different LED lighting modes or turns them off.
15. Chanjman pouvwa AC: Turns the speaker power ON or OFF.
16. AC 110/230V Voltage Chanje: Selects the appropriate voltage pou rejyon ou. Ensure this is set correctly before powering on.
17. AC Power Connect: Konekte kab pouvwa a isit la.

The speaker features a 15-inch woofer for deep bass and a 1-inch titanium diaphragm tweeter for clear high frequencies, powered by a 180W RMS Bi-Amp Klas AB amplifier.

Image: Internal components of the Memorex MX-PS1501 speaker, showing the 1.35" tweeter, 3" voice coil, and 15" woofer.

Enstalasyon

1. Debake: Retire oratè a ak tout akseswa yo nan anbalaj la avèk prekosyon.
2. Voltage Seleksyon: Locate the AC 110/230V Voltage Switch (Item 16 in Product Overview). Ensure it is set to the correct voltage for your region before connecting power. Incorrect voltagSeleksyon e ka domaje inite a.
3. Speaker Stand Assembly:
   • Extend the legs of the speaker stand to a stable position.
   • Adjust the height of the stand to your desired level and secure it with the locking pin and knob.
   • Carefully lift the MX-PS1501 speaker and place it onto the pole of the speaker stand. Ensure it is seated securely.
4. Koneksyon pouvwa: Connect the supplied power cable to the AC Power Connect port (Item 17) on the speaker and then to a suitable power outlet.
5. Premye pouvwa sou: Flip the AC Power Switch (Item 15) to the 'ON' position. The speaker's display and LED lights should activate.

Enstriksyon Operasyon

Power On/Off

• To turn on, ensure the voltage switch is correct, then press the AC Power Switch to 'ON'.
• To turn off, press the AC Power Switch to 'OFF'.

Pè Bluetooth

1. Turn on the MX-PS1501 speaker.
2. The speaker will automatically enter Bluetooth pairing mode. The DSP Monitor (Item 2) will show "Bluetooth" and may flash.
3. Sou aparèy mobil ou a (telefòn entelijan, tablèt, elatriye), aktive Bluetooth epi chèche aparèy ki disponib yo.
4. Select "MX-PS1501" from the list of devices.
5. Once paired, the speaker will indicate a successful connection, and the DSP Monitor will show "Bluetooth" steadily.
6. Adjust the Bluetooth Volume Knob (Item 6) and your device's volume to control the audio output.

Vrè Stereo Wireless (TWS) Pairing

TWS allows you to connect two MX-PS1501 speakers wirelessly for a stereo sound experience.

Image: Two Memorex MX-PS1501 speakers operating in True Wireless Stereo (TWS) mode, enhancing the audio experience.

1. Ensure both MX-PS1501 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the master speaker), press and hold the TWS button (part of Item 4, Control Panel) for a few seconds until you hear a prompt or see an indicator.
3. The master speaker will search for the second speaker.
4. Once connected, both speakers will indicate successful TWS pairing.
5. Now, connect your mobile device to the master speaker via Bluetooth as described above. Audio will play through both speakers in stereo.

Lektur USB/SD

1. Insert a USB drive into the USB Slot (Item 3) or an SD card into the designated slot (if available, not explicitly shown but mentioned in description).
2. The speaker should automatically detect the media and begin playback.
3. Use the Control Panel buttons (Item 4) for Play/Pause, Next Song, and Volume adjustments.

Antre mikwofòn/liy

1. Connect your wired microphone or line-level audio source (e.g., mixer, instrument) to the Mic/Line XLR Input (Item 10 or 11).
2. Adjust the Mic Line Input Volume Knob (Item 7 or 8) to control the input level.

Aux Antre

1. Connect an external audio device (e.g., laptop, MP3 player) to the Aux 3.5mm Input / RCA Input (Item 12) using the appropriate cable.
2. Adjust the volume from your connected device and the master volume on the speaker.

Ki ap dirije ekleraj kontwòl

• Press the LED Switch Mode Button (Item 14) to cycle through various lighting effects.
• Continue pressing to turn the LED lights off.

Mòd DSP

• Use the DSP Preset Select (Item 1) to choose from available sound modes like Standard, Live, Monitor, or Vocal.
• The selected mode will be displayed on the DSP Monitor (Item 2).

Antretyen

• Netwayaj: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the speaker. Do not use liquid cleaners or abrasive materials.
• Depo: Lè w pa itilize oratè a pou yon bon bout tan, sere l nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Vantilasyon: Asire w ouvèti vantilasyon oratè a pa bloke pou anpeche li chofe twòp.

Depanaj

Espesifikasyon

Technical specifications for the Memorex MX-PS1501 PA Speaker:

Imaj: Kote ak devan views of the Memorex MX-PS1501 speaker, illustrating its physical dimensions.

Garanti ak sipò

The Memorex MX-PS1501 PA Speaker comes with a 1-ane garanti limite apati dat acha a. Garanti sa a kouvri domaj fabrikasyon nan materyèl ak atizan konn fè anba itilizasyon nòmal.

For warranty claims, technical support, or service inquiries, please contact Memorex customer support. Please have your model number (MX-PS1501) and proof of purchase ready.

Contact information for Memorex customer support is typically found on the manufacturer's websit oswa enkli nan anbalaj la pwodwi.