BSMOOM Car Jump Starter User Manual

1. Entwodiksyon

The BSMOOM Car Jump Starter (Model B06) is a portable, multi-functional device designed to provide emergency jump-starting for vehicles with dead batteries. It also functions as a power bank for electronic devices and features an integrated LED flashlight for various situations. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your jump starter.

Image: The BSMOOM Car Jump Starter, showing the main unit, jumper cables, USB-C charging cable, and user manual.

2. Enfòmasyon sou Sekirite

Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, or serious injury.

Prekosyon Sekirite Jeneral:

• Kenbe soti nan atenn timoun yo.
• Pa ekspoze pwodwi a lapli oswa kondisyon mouye.
• Pa opere pwodwi a si li te domaje nan nenpòt fason.
• Asire bon vantilasyon pandan w ap itilize.
• Pa demonte aparèy la. Konfye tout antretyen bay pèsonèl kalifye.
• Sere nan yon kote ki fre, sèk lè yo pa itilize.

Jump Starting Safety:

• Ensure the jump starter's power level is above 50% before attempting a jump start.
• Konekte cl wouj laamp nan tèminal pozitif (+) batri machin nan ak klou nwa aamp to the negative (-) terminal or a suitable ground point on the vehicle chassis.
• Pa manyen kl wouj la ak nwaamps ansanm.
• Pa eseye sote kòmanse yon batri nan frizè.
• Remove the jump starter within 30 seconds after the vehicle starts.

Image: Visual representation of the 8 built-in safety protections, including over-temperature, over-voltage, over-charge, short circuit, over-discharge, reverse polarity, over-current, and anti-interference protection.

3. Ki sa ki nan bwat la

Verifye ke tout atik yo prezan epi yo an bon kondisyon lè w ap ouvri pake a:

• 1 x BSMOOM Car Jump Starter (Model B06)
• 1 x Heavy-Duty Jumper Cables with Smart Clamp
• 1 x USB-C chaje kab
• 1 x manyèl itilizatè

Image: A flat lay showing the BSMOOM jump starter unit, smart jumper clamps, USB-C cable, and user manual, clearly indicating "What's in the Box".

4. Pwodwi Features

• Ultra-Powerful Jump Start Performance: 5000A peak current for 10.0L gas and 8.0L diesel engines.
• Dual USB Power Bank: Equipped with Dual USB Quick Charge ports (9V/2A) for charging smartphones, laptops, and other USB devices.
• Advanced 8-Layer Safety Protection: Includes spark-proof, reverse polarity, short circuit, overcharge, over-voltage, over-current, low-temperature, and high-temperature protections.
• 400-Lumen Emergency LED Lights: Features Flashlight, Strobe, and SOS modes for various lighting needs.
• Durabilite ekstrèm: Crafted with military-grade materials, resistant to drops and water splashes.
• Tan sibstiti long: Maintains standby power for up to 24 months.

Image: The portable car jump starter unit, highlighting its 5000A 12V capability and compatibility with 10.0L Gas, 8.0L Diesel engines, motorcycles, lawnmowers, and boats.

5. Enstalasyon ak Premye Chaj

Before first use, fully charge the BSMOOM Car Jump Starter.

1. Connect the included USB-C charging cable to the jump starter's input port.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The digital display will show the charging progress. Charge until the display indicates 100%.
4. Yon chaj konplè anjeneral pran plizyè èdtan.

Important: For optimal battery health, recharge the unit every 2-3 months if stored for long periods.

6. Operasyon Enstriksyon

6.1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj

Swiv etap sa yo ak anpil atansyon pou demarre machin ou an:

1. Asire w ke demarè a gen omwen 50% chaj.
2. Turn off the vehicle's ignition and all accessories (lights, radio, A/C).
3. Connect the blue end of the smart jumper cables to the jump starter's port. Ensure a tight connection.
4. Konekte wouj (+) clamp nan tèminal pozitif (+) batri machin nan.
5. Konekte nwa (-) clamp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the engine block/chassis.
6. Yon fwa konekte, klozèt entelijan anamp will indicate a ready status (usually a solid green light). If an error is detected (e.g., reverse polarity), an audible alarm and flashing lights will activate. Correct the connection if this occurs.
7. Retounen nan machin nan epi limen motè a.
8. Once the engine starts, immediately disconnect the smart clamp from the vehicle battery's negative (-) terminal first, then the positive (+) terminal.
9. Finally, disconnect the smart clamp from the jump starter unit.

6.2. Itilizasyon kòm yon Bank Ekstèn Pòtab

The BSMOOM Car Jump Starter can charge various electronic devices via its USB ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB or Type-C).
2. Demarè a ap kòmanse chaje aparèy ou an otomatikman.
3. Ekspozisyon dijital la pral montre pousantaj batri ki rete atage nan starter so a.

Image: The BSMOOM jump starter connected via USB-C to a smartphone, demonstrating its function as a portable power bank. The image also shows compatibility with phones, tablets, headsets, cameras, and watches.

6.3. Sèvi ak flach LED la

Lanp pòch LED 400 lumèn entegre a ofri twa mòd:

• Mòd flach: Peze bouton pouvwa a yon fwa pou limen limyè fiks la.
• Strobe mòd: Press the power button again to activate the strobe light.
• Mòd SOS: Press the power button a third time for the SOS signal.
• Press the power button a fourth time to turn off the flashlight.

Image: The BSMOOM jump starter's integrated LED flashlight illuminating a dark area, with icons indicating its flashlight, SOS, and Strobe functions. Examples of use include outdoor camping, roadside emergencies, and car breakdowns.

7. Antretyen

Proper maintenance ensures the longevity and performance of your BSMOOM Car Jump Starter:

• Netwayaj: Siye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Depo: Sere demarè a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Rechaje: For long-term storage, recharge the unit every 2-3 months to maintain battery health and prevent deep discharge.
• Tanperati: Avoid exposing the unit to temperatures outside its operating range (-4°F to 140°F / -20°C to 60°C).

Image: The BSMOOM jump starter depicted in both cold (-4°F/-20°C) and hot (140°F/60°C) weather environments, illustrating its wide range of working temperatures.

NAN. Depanaj

If you encounter issues with your BSMOOM Car Jump Starter, refer to the table below:

9. Espesifikasyon

10. Garanti ak sipò

The BSMOOM Car Jump Starter (Model B06) comes with a 2-ane garanti from the date of purchase, covering manufacturing defects and workmanship. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or natural disasters.

For technical support, warranty claims, or any questions regarding your product, please contact BSMOOM customer service:

• Imèl: [Insert Manufacturer Email Here, if available]
• Telefòn: [Insert Manufacturer Phone Here, if available]
• Websit: [Insert Manufacturer Website Here, if available]

Please have your purchase receipt and product model number (B06) ready when contacting support.