Entwodiksyon
The JETBeam M37 Pro is a high-performance, rechargeable LED flashlight designed for various applications including outdoor adventure, emergency situations, and daily use. Featuring a powerful Cree XHP50.3 LED, it delivers up to 3700 lumens and has a beam distance of up to 465 meters. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your M37 Pro flashlight.

Image: The JETBeam M37 Pro flashlight in green, showcasing konsepsyon solid li yo.
Ki sa ki nan bwat la
- JETBeam M37 Pro Flashlight
- 5100mAh battery (1)
- USB-C Charging cable (1)
- Bag O rezèv (2)
- kòdon (1)
- Clip (1)
- Tactical Ring (1)
Enstalasyon
Enstalasyon batri
- Devise bouchon dèyè flach la lè w vire l nan sans kontrè ak zegwi mont lan.
- Insert the included 5100mAh battery with the positive (+) end facing towards the head of the flashlight.
- Vise bouchon dèyè a tounen nan sans zegwi mont lan jiskaske li byen sere. Asire w ke bag O a byen chita pou kenbe entegrite enpèmeyab.
Chaje batri a
The M37 Pro features a hidden Type-C charging port for convenient recharging.
- Locate the hidden Type-C charging port on the flashlight body. This port is typically covered by a rotating collar or a rubber flap to ensure waterproof protection.
- Connect the provided USB-C charging cable to the flashlight's Type-C port.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- The battery life indicator will show the charging status. Charge until the indicator shows a full charge.
- Once charging is complete, disconnect the cable and ensure the charging port cover is securely closed to maintain water resistance.

Image: Close-up of the JETBeam M37 Pro showing the tactical tail switch and the one-way clip, which can be used for attachment to gear.
Enstriksyon Operasyon
Operasyon debaz
- Limen/Etenyen: Press the tactical tail switch fully to turn the flashlight on or off.
- Mòd Siklis: With the flashlight on, lightly tap the tactical tail switch to cycle through the different brightness modes (e.g., Low, Medium, High, Turbo).
- Strobe mòd: From any state (on or off), quickly double-tap the tactical tail switch to activate Strobe mode. Tap again to return to the previous mode or turn off.
The M37 Pro is equipped with a Cree XHP50.3 LED, providing powerful and efficient illumination. Its intelligent temperature control system prevents overheating by gradually reducing brightness if the temperature reaches 55°C, ensuring stable performance and longevity.

Image: The JETBeam M37 Pro flashlight illuminating a long distance across a body of water, demonstrating its powerful beam.

Image: Diagram illustrating the intelligent temperature control feature of the JETBeam M37 Pro, showing heat dissipation from the flashlight head.
Endikatè lavi batri
The flashlight includes battery life indicators to help you monitor the remaining power. Refer to the product's specific indicator light patterns for detailed information on battery levels.
Karakteristik ki enpèmeyab
The M37 Pro is IPX-8 waterproof, meaning it can be submerged up to 2 meters underwater and function normally in heavy rain. Ensure all caps and covers, especially the charging port, are securely closed before exposing the flashlight to water.

Image: The JETBeam M37 Pro flashlight on a wet, rocky surface, with water droplets, highlighting its IPX8 waterproof rating.
Antretyen
- Netwayaj: Netwaye kò flach la avèk yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- O-bag: Periodically inspect the O-rings for wear and tear. Lubricate them with silicone grease to maintain waterproof integrity. Replace worn O-rings with the provided spares.
- Fil: Keep the threads of the tail cap clean and lightly lubricated to ensure smooth operation and good electrical contact.
- Depo: If storing the flashlight for an extended period, remove the battery to prevent potential leakage and damage. Store in a cool, dry place.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Flach pa limen. | Batri a mouri oswa li pa byen mete. Bouchon ke a lach. | Recharge or replace battery; ensure correct polarity. Sere bouchon dèyè a byen sere. |
| Limyè a ap tranble oubyen li fèb. | Batri ki ba. Kontak sal. Loose head or tail cap. | Rechaje batri. Clean battery and flashlight contacts. Tighten head and tail cap. |
| Cannot change modes. | Tactical switch malfunction. | Ensure the switch is clean and free of debris. If problem persists, contact customer support. |
| Chaje a pa fonksyone. | Kab chaje a oswa adaptè a gen pwoblèm. Pò chaje a bouche. | Eseye yon lòt kab USB-C ak yon lòt adaptè kouran. Check charging port for debris and ensure it's fully exposed. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Modèl | M37 MAX |
| Sous limyè | Cree XHP50.3 LED |
| Maksimòm Sòti | 3700 Lumen |
| Distans Maksimòm Gwo bout bwa | 465 mèt |
| Pik entansite gwo bout bwa | 54200cd |
| Max Runtime | 66 èdtan |
| Sous pouvwa | 5100mAh Lithium Ion Battery (Included) |
| Port chaje | Hidden Type-C |
| Rezistans dlo | IPX-8 (anba dlo 2 mèt) |
| Materyèl | Anodize aliminyòm |
| Dimansyon (L x Dyamèt Tèt x Dyamèt Kò) | 147.8mm x 38.5mm x 27.5mm (Approx. 5.82" x 1.52" x 1.08") |
| Pwa (san batri) | 350g (Approx. 12.35 oz) |
| Karakteristik espesyal | Rechargeable, Waterproof, Portable, Dimming, Intelligent Temperature Control, Tactical Tail Switch, One-Way Clip, Emergency Self-Defense (3 high hardness silicon nitride balls on strike bezel) |

Image: A table detailing the technical parameters of the JETBeam M37 Pro, including lumen output, runtime, beam intensity, and distance for various modes.
Videyo pwodwi ofisyèl la
Videyo: Yon prezantasyon videyo pwodwi ofisyèlasing the features and capabilities of the JETBeam M37 Pro flashlight, including its durability, waterproofness, and various lighting modes.
Garanti ak sipò
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official JETBeam websit la. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.
Manifakti: JETBeam