Graco TriRide 3-in-1 Reclining Car Seat Instruction Manual

Entwodiksyon

This manual provides essential information for the proper installation, use, and maintenance of your Graco TriRide 3-in-1 Reclining Car Seat. Please read all instructions carefully before using the car seat to ensure the safety and comfort of your child. Keep this manual in a safe place for future reference.

Enfòmasyon sou Sekirite

AVÈTISMAN: Si ou pa swiv enstriksyon sa yo, pitit ou a ka blese gravman oswa mouri.

• Always secure your child in the car seat and the car seat in the vehicle according to the instructions.
• Pa janm kite pitit ou a poukont li sou chèz machin lan.
• Ensure the car seat is properly installed and the harness is snug before every ride.
• Do not use this car seat if it has been involved in a crash, even if there is no visible damage.
• Refer to your vehicle's owner's manual for specific car seat installation guidelines.
• The Graco TriRide is ProtectPlus Engineered to help protect in frontal, side, rear, and rollover crashes.

Karakteristik pwodwi

• Konsepsyon 3-an-1: Adapts to your child's growth through three modes of use.
• ProtectPlus Engineered: Rigorously crash-tested to help protect in frontal, side, rear, and rollover crashes.
• No-Rethread Simply Safe Adjust Harness System: Allows simultaneous adjustment of headrest and harness height.
• 10-Pozisyon Tèt Apoul: Provides a secure and comfortable fit for your growing child.
• 6 pozisyon pou kouche: Ensures child comfort and aids in proper installation.
• Ekipe ak LATCH: Facilitates easy and secure installation in compatible vehicles.
• Integrated Harness Storage: Keeps the harness safely stored when not in use, particularly in booster mode.
• Open-Loop Belt Guides: Assists in correctly positioning the vehicle's seat belt in highback booster mode.
• Dual Cup Holders: Two easy-to-clean cup holders for drinks and snacks.
• Machine-Washable Seat Pad: Removable seat pad for convenient cleaning.
• Removable Plush Inserts: Head and body inserts provide comfort for infants.
• Ankadreman ranfòse ak asye: Offers strength and durability for extended use.

Mod Itilizasyon

The Graco TriRide 3-in-1 Car Seat is designed to accommodate your child from infancy through booster age.

1. Rear-Facing Harness Mode:
   • For children weighing 5-40 lb (2.27-18.14 kg).
   • Child's head must be at least 1 inch below the top of the car seat's headrest.
   • Always install rear-facing in the back seat of the vehicle.
2. Forward-Facing Harness Mode:
   • For children weighing 26.5-65 lb (12.02-29.48 kg).
   • Child must be at least 1 year old and have outgrown the rear-facing weight/height limits.
   • Always install forward-facing in the back seat of the vehicle.
3. Highback Booster Mode:
   • For children weighing 40-100 lb (18.14-45.36 kg).
   • Child must be at least 4 years old and have outgrown the forward-facing harness limits.
   • Use with the vehicle's lap and shoulder belt system.

Enstalasyon ak Enstalasyon

Recliner Pozisyon

The car seat features 6 recline positions to ensure optimal comfort for your child and a proper angle for installation. Refer to the recline indicator on the side of the car seat to select the appropriate position for your child's weight and the car seat's mode of use.

Harness and Headrest Adjustment

The No-Rethread Simply Safe Adjust Harness System allows you to adjust the headrest and harness height simultaneously. This system offers 10 headrest positions to achieve the safest fit as your child grows. To adjust, squeeze the adjustment handle located at the top of the headrest and slide it up or down to the desired position. Ensure the harness straps are at or just below the child's shoulders for rear-facing, and at or just above for forward-facing.

Enstalasyon LATCH

The Graco TriRide car seat is LATCH-equipped for easy installation. Locate the LATCH anchors in your vehicle and attach the car seat's LATCH connectors. Ensure a tight fit by pressing down on the car seat while tightening the LATCH strap. Always check for less than 1 inch of movement at the belt path when pulled side-to-side and front-to-back.

Enstriksyon Operasyon

Sekirize pitit ou a

1. Mete pitit ou a nan chèz machin nan ak do li plat kont do chèz la.
2. Bring the harness straps over your child's shoulders and buckle the chest clip and crotch buckle.
3. Tighten the harness straps until snug. You should not be able to pinch any slack at the child's collarbone.
4. Mete klip pwatrin lan nan nivo anba bra a.

Using Cup Holders

The two integrated cup holders are designed for convenience. They can be removed for easy cleaning. Simply pull them out to detach and push them firmly back into place to reattach.

Antretyen

Netwaye kousen chèz la

The seat pad is machine washable for your convenience. Refer to the care label on the seat pad for specific washing instructions. Typically, it can be machine washed in cold water on a delicate cycle and air dried. Do not use bleach.

Cleaning the Harness and Buckles

Siye espageti yo ak piblisiteamp cloth. Do not machine wash or submerge harness straps in water, as this can weaken them. Clean buckles with a damp cloth. If the crotch buckle is sticky, rinse it under warm water without soap and allow it to air dry.

Cleaning Plastic and Metal Parts

Wipe plastic and metal parts with mild soap and cool water. Do not use abrasive cleaners or solvents.

Depanaj

• Syèj machin nan santi l lach apre enstalasyon an: Recheck the LATCH or vehicle belt installation. Ensure the belt path is correct and the strap is pulled tight. The car seat should not move more than 1 inch at the belt path.
• Espageti harnais yo difisil pou sere/dekole: Ensure the harness straps are not twisted. Check that the harness release button is fully depressed when loosening. If the buckle is sticky, follow the cleaning instructions above.
• Child Appears Uncomfortable: Adjust the headrest and recline position to better suit your child's size and comfort. Ensure the harness is snug but not too tight.

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please contact Graco customer service. Keep your proof of purchase and the product's model number (2215745) readily available when contacting support.

You can find more information and contact details on the official Graco websit: www.gracobaby.com