Asurity by Diversitech CP-22LPT Low Profile Manyèl itilizatè ponp kondansasyon

Entwodiksyon

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Asurity by Diversitech CP-22LPT Low Profile Condensate Pump. This pump is designed to automatically evacuate condensate or water discharge from HVACR equipment, offering a vertical lift capability of up to 22 feet. Its low-profile design makes it suitable for installations in tight spaces.

Enfòmasyon sou Sekirite

Li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak operasyon. Si ou pa swiv enstriksyon sa yo, ou ka domaje materyèlman, blese moun oswa mouri.

• Danje elektrik: Disconnect power before servicing. This unit operates on 110 Volts. Ensure all electrical connections comply with local codes.
• Danje Dlo: This pump handles water. Ensure proper drainage and prevent water damage.
• Enstalasyon: Install the pump in a location where it is accessible for maintenance and inspection.
• Itilizasyon entansyonèl: Use this pump only for its intended purpose of evacuating condensate from HVACR equipment.
• UL ki nan lis: This product is UL listed, meeting electrical and mechanical safety standards for water pumps.

Kontni pake

Verifye ke tout bagay yo prezan anvan ou kòmanse enstalasyon an:

• Asurity by Diversitech CP-22LPT Condensate Pump
• 20 ft Clear Vinyl Tubing
• 4 ft Safety Switch Wire (pigtail)

Pwodwi souview

The Asurity CP-22LPT condensate pump features a compact design with advanced functionalities for reliable condensate removal.

Imaj 1: The Asurity CP-22LPT low profile condensate pump shown with the included clear vinyl tubing. The pump features a red base and a black motor housing with ventilation slots and an outlet port.

Imaj 2: Yon tèt anba view of the Asurity CP-22LPT condensate pump, accompanied by the coiled clear vinyl tubing and the yellow safety switch wire. This image highlights all primary components included with the unit.

Imaj 3: A side perspective of the Asurity CP-22LPT condensate pump, illustrating its low-profile design. This view emphasizes the compact dimensions suitable for installation in confined spaces.

Karakteristik kle:

• LED Status Indicator Lights (Power, Run, Alarm)
• Vibwasyon Dampening System for quiet operation
• Integrated Safety Switch with 4 feet of wire for air-handler shutdown
• Low profile design for tight installations
• Metal mounting tabs for secure installation
• Four inlet holes (with 3 poly covers for unused ports)
• Float switch and duckbill-style check valve

Enstalasyon ak Enstalasyon

Proper installation is crucial for the pump's performance and longevity. Ensure all local electrical and plumbing codes are followed.

1. Plasman: Position the pump on a level surface near the HVACR unit. The low-profile design is ideal for tight spaces. Utilize the vibration dampening feet and metal mounting tabs for secure placement.
2. Condensate Inlet Connection: Connect the condensate drain line from the HVACR unit to one of the pump's inlet holes. The pump has four inlet holes; seal any unused inlets with the provided poly covers.
3. Discharge Line Connection: Connect the 20 ft clear vinyl tubing to the pump's discharge outlet. Route the tubing upwards, ensuring it does not exceed the pump's 22 ft vertical lift capability, and then to a suitable drain point. Avoid kinks or sharp bends in the tubing. The integrated duckbill-style check valve prevents backflow.
4. Koneksyon elektrik: Connect the pump to a dedicated 110V power supply. Ensure the power source is off before making connections.
5. Koneksyon switch sekirite: Connect the 4 ft safety switch wire (pigtail) to the air-handler's shutdown circuit. This feature is designed to shut down the HVACR unit if the pump fails or the water level rises too high, preventing overflow. Refer to your HVACR unit's manual for specific wiring instructions for the safety switch.
6. Tès: After installation, manually pour water into the pump's reservoir to verify proper operation. The pump should activate, discharge the water, and then shut off. Check for any leaks.

Enstriksyon Operasyon

The Asurity CP-22LPT condensate pump operates automatically once properly installed and powered.

• When condensate water enters the pump's reservoir and reaches a predetermined level, the internal float switch activates the pump.
• The pump will then discharge the water through the connected vinyl tubing to the designated drain.
• Once the water level drops, the float switch deactivates the pump.
• Endikatè ki ap dirije:
  • Pwr (Power): Illuminates when the pump is receiving electrical power.
  • Kouri: Illuminates when the pump motor is actively discharging water.
  • Alrm (Alarm): Illuminates if the water level rises to the high-level alarm switch, indicating a potential issue and activating the safety shutdown circuit.

Antretyen

Antretyen regilye asire pèfòmans optimal epi pwolonje lavi ponp kondansasyon ou an.

• Enspeksyon chak mwa: Check the pump reservoir for sludge, mold, or debris. Clean as necessary.
• Netwayaj: Disconnect power before cleaning. Remove the pump cover and clean the reservoir with a mild detergent and water. Ensure the float switch moves freely.
• Liy Egzeyat: Inspect the vinyl tubing for blockages, kinks, or leaks. Clear any obstructions.
• Pò Antre: Ensure inlet ports are clear of debris.

Depanaj

Gade tablo ki anba a pou pwoblèm komen ak solisyon yo.

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please contact Diversitech customer service. Keep your purchase receipt for warranty claims.

Manifakti: Diversitech

Websit: www.diversitech.com

Kontakte: Gade nan enstriksyon manifakti a websit pou jwenn enfòmasyon kontak aktyèl.