HAUSHOF StainZapper Pro Portable Carpet and Upholstery Cleaner

1. Entwodiksyon

Thank you for choosing the HAUSHOF StainZapper Pro Portable Carpet and Upholstery Cleaner. This device is designed for effective spot cleaning of fabric sofas, carpets, car interiors, and other upholstered surfaces. Its powerful suction and dual-tank system ensure thorough cleaning without secondary contamination. Please read this manual carefully before use to ensure safe and optimal operation.

2. Enstriksyon Sekirite

AVÈTISMAN: Pou diminye risk dife, chòk elektrik, oswa blesi, li epi swiv tout enstriksyon yo ak anpil atansyon.

• Toujou dekonekte aparèy la nan priz kouran anvan w netwaye oswa fè antretyen.
• Pa plonje aparèy la nan dlo oswa nan lòt likid.
• Use only HAUSHOF recommended cleaning solutions or low-foaming detergents. Excessive foaming can cause leaks and overflow from the dirty water tank.
• Kenbe cheve, rad ki lach, dwèt, ak tout pati nan kò a lwen ouvèti ak pati k ap deplase.
• Do not use the appliance on wet surfaces or outdoors.
• Pa ranmase anyen k ap boule oswa fimen, tankou sigarèt, alimèt, oswa sann cho.
• Pa itilize san tank an plas.
• Sipèvize timoun yo epi asire yo pa jwe ak aparèy la.

3. Pwodwi souview

Eleman

The HAUSHOF StainZapper Pro includes the following main components:

• Inite prensipal ak manch
• Clean Water Tank (1500ml capacity)
• Dirty Water Tank (800ml capacity)
• Flexible Hose (160cm)
• Large Brush Attachment (18cm)
• Joint Brush Attachment
• Boutèy detèjan
• Mesure Cup

Figure 3.1: HAUSHOF StainZapper Pro Components

Figure 3.2: Dual Tank System for Clean and Dirty Water

Espesifikasyon

Figure 3.3: Lightweight and Compact Design for Easy Storage

Figure 3.4: Hose and Power Cord Length for Extended Reach

4. Enstalasyon

1. Depake aparèy la: Ak anpil atansyon retire tout eleman nan anbalaj la.
2. Assemble Tanks: Ensure the clean water tank and dirty water tank are correctly seated in the main unit. Press down firmly until you hear a click, indicating they are securely installed.
3. Ranpli tank dlo pwòp la: Remove the clean water tank. Fill it with clean water up to the MAX line. Add a small amount of low-foaming cleaning solution using the provided measuring cup. Do not overfill.
4. Mete bouch netwayaj la: Connect the desired cleaning nozzle (large brush or joint brush) to the end of the flexible hose.
5. Konekte pouvwa: Ploge fil elektrik la nan yon priz elektrik apwopriye.

5. Operasyon Enstriksyon

The StainZapper Pro utilizes a three-step cleaning process: spray, brush, and vacuum.

Figure 5.1: All-in-One Cleaning Function: Spray, Brush, Vacuum

Figure 5.2: Three-Step Cleaning Process

1. Pouvwa sou: Peze bouton pouvwa a pou limen aparèy la.
2. Flite: Hold the cleaning nozzle over the stained area. Press the spray trigger to release the cleaning solution onto the stain.
3. Bwòs: Gently scrub the stained area with the brush attachment to loosen dirt and stains.
4. Vakyòm: Release the spray trigger and slowly move the nozzle over the treated area to vacuum up the dirty solution. Repeat steps 2-4 as needed until the stain is removed.
5. Intelligent Stop Feature: The appliance is equipped with an intelligent stop feature. When the dirty water in the wastewater tank reaches approximately 800ml (above the maximum fill line), the suction will automatically stop to prevent overflow. The motor will continue to run. At this point, turn off the machine, empty the dirty water tank, and then resume cleaning.

Sèvi ak atachman diferan

Figure 5.3: Large Brush and Joint Brush Attachments

• Large Brush Attachment: Ideal for general deep cleaning of larger surfaces like carpets, rugs, and wide sofa areas.
• Joint Brush Attachment: Designed for cleaning narrow gaps, crevices, and hard-to-reach areas such as sofa seams, car seat edges, and corners.

Aplikasyon Egzamples

Figure 5.4: Cleaning a Carpet Stain

Figi 5.5: Netwaye yon Sofa

Figure 5.6: Cleaning Car Seats

6. Antretyen

1. Tank dlo sal vid: After each use, or when the intelligent stop feature activates, remove the dirty water tank and empty its contents into a drain. Rinse the tank thoroughly with clean water.
2. Clean Nozzle and Hose: Disconnect the cleaning nozzle and rinse it under running water. Flush the hose with clean water to prevent blockages.
3. Netwaye Inite Prensipal la: Siye deyò inite prensipal la ak piblisiteamp twal. Pa sèvi ak pwodui netwayaj abrazif.
4. Depo: Wrap the hose around the designated storage area on the main unit. Store the appliance and its attachments in a cool, dry place, away from direct sunlight and out of reach of children. The compact design allows for easy storage in cabinets.

NAN. Depanaj

If you encounter issues with your HAUSHOF StainZapper Pro, please refer to the following common problems and solutions:

No Water Spraying

• Check Clean Water Tank: Ensure the clean water tank is correctly installed and contains sufficient water and detergent. Press the tank firmly to ensure it clicks into place.
• Tcheke pou bloke: Inspect the spray nozzle for any blockages. Clean if necessary.

Dlo Leakage

Water leakage can occur due to several reasons:

Figure 7.1: Troubleshooting Water Leakage

• Loose Tank: Ensure the clean and dirty water tanks are securely fastened and not loose.
• Missing/Damaged Sealing Ring: Check if the sealing ring on the dirty water tank's lid is present and undamaged. A missing or damaged ring can cause leaks.
• Clogged with Stains: If the dirty water tank's valve or components are clogged with debris or dried stains, it can prevent proper sealing. Clean these parts thoroughly.
• Blocked Valve Cable: Ensure the valve cable (if applicable) is not blocked or obstructed, allowing the valve to close properly.

Si pwoblèm nan pèsiste apre ou fin verifye pwen sa yo, tanpri kontakte sèvis kliyan.

8. Garanti ak sipò

HAUSHOF products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official HAUSHOF websit la. Tanpri konsève prèv acha ou a pou nenpòt reklamasyon garanti.